Okwu mmalite
This Monoprice Blackbird 4K 4x1 HDMI Switch allows you to connect up to four HDMI source devices to a single HDMI display. It supports video resolutions up to 4K@60Hz, including 1080p@60Hz and all 3D video modes. It can extract audio from the HDMI source to the combined 3.5mm analog stereo/mini Toslink digital optical jack on the rear panel. It supports HDCP 2.2, EDID management, and is compliant with the HDMI 2.0a standard, including support for the Audio Return Channel (ARC) feature.
Njirimara ngwaahịa
- Compliant with the HDMI 2.0a and HDCP 2.2 specifications.
- Features 4 HDMI inputs and 1 HDMI output.
- Supports video resolutions up to 4K@60Hz with 24-bit RGB/YcbCr 4:4:4.
- Supports Dual Audio Return Channel (ARC) control.
- Super wideband IR control system. Bidirectional IR pass-through.
Ihe ngwugwu
Please ensure all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
- Monoprice 4K 4x1 HDMI Switch
- Njikwa anya IR
- 5V DC nkwụnye ọkụ
- Akwụkwọ ntuziaka onye ọrụ
Image: Monoprice 4K HDMI Switch, remote control, and power adapter included in the package.
Ngwaahịa gafereview
Ogwe ihu
Image: Front panel of the Monoprice 4K HDMI Switch, showing input selection buttons and status LEDs.
The front panel features LED indicators for each of the four HDMI inputs, as well as for audio output modes (Auto, 2CH, 5.1CH, 7.1CH), EDID management, and ARC status. A central button allows for manual cycling through inputs.
Ogwe azụ
Image: Rear panel of the Monoprice 4K HDMI Switch, displaying HDMI input/output ports, audio output, RS-232, IR, and DC 5V power input.
The rear panel includes four HDMI input ports (In1-In4), one HDMI output port (Out), a combined 3.5mm analog stereo/mini Toslink digital optical audio output, an RS-232 port for control, an IR receiver port, and a DC 5V power input.
Ntọala & Nwụnye
Follow these steps to properly set up your Monoprice 4K HDMI Switch:
- Connect your HDMI source devices (e.g., DVD player, gaming console, laptop) to the HDMI input ports (In1-In4) on the switch.
- Connect the HDMI output port (Out) on the switch to your HDMI display (e.g., TV, projector).
- If using audio extraction, connect your audio receiver or soundbar to the combined 3.5mm analog stereo/mini Toslink digital optical audio output.
- Connect the 5V DC power adapter to the DC 5V input port on the switch and then plug the adapter into a power outlet.
- Gbaa mbọ hụ na agbanyere ngwaọrụ niile.
Image: Diagram illustrating typical connections for the Monoprice 4K HDMI Switch with various source devices and a display.
Ntuziaka ọrụ
You can switch between HDMI inputs using either the front panel button or the included IR remote control.
Using the Front Panel Button
Press the input selection button on the front panel to cycle through the connected HDMI sources (In1, In2, In3, In4). The corresponding LED will illuminate to indicate the active input.
Iji IR Remote Control
Point the IR remote control towards the IR receiver port on the switch. Press the numbered buttons (1, 2, 3, 4) to directly select the desired HDMI input. The 'Next' button can also be used to cycle through inputs sequentially.
Mwepụta ọdịyo
The switch can extract audio from the active HDMI source and output it through the combined 3.5mm analog stereo/mini Toslink digital optical jack. Use the audio selection buttons on the front panel or remote to choose between Auto, 2CH, 5.1CH, or 7.1CH audio modes, depending on your audio receiver's capabilities.
Njikwa EDID
The switch supports EDID management to ensure compatibility between your source devices and display. The EDID settings can be adjusted via the front panel controls to optimize video and audio performance.
Nchọpụta nsogbu
- Enweghị Vidiyo/Ọdịyo: Ensure all HDMI cables are securely connected and not damaged. Verify the power adapter is properly connected and the switch is powered on. Try cycling through inputs.
- Remote anaghị arụ ọrụ: Check if the remote control batteries are correctly inserted and have sufficient charge. Ensure there are no obstructions between the remote and the IR receiver port on the switch.
- Ogo Foto adịghị mma: Verify that your HDMI cables are rated for the resolution and refresh rate you are attempting to use (e.g., 4K@60Hz requires high-speed HDMI cables). Adjust EDID settings if necessary.
Nkọwapụta
| Akụkụ ngwaahịa | 10 x 7.5 x 2.25 sentimita asatọ |
| Ibu Ibu | 1.3 pound |
| Nọmba Nlereanya ihe | 139666 |
| Onye nrụpụta | Monoprice |
| Agba | Nwa |
| Ụdị njikọ | HDMI |
| Ngwa dakọtara | DVD Player, Projector, Television, Gaming Console, Laptop, Personal Computer, Blu-ray Player |
| Ụdị USB | HDMI |
Akwụkwọ ikike & Nkwado
This Monoprice 4K HDMI Switch comes with a Akwụkwọ ikike nke afọ 1 from the date of purchase. For technical assistance, troubleshooting, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Monoprice websaịtị.
