ATEM POWER 200W Monocrystalline Solar Panel User Manual

1. Okwu mmalite

This user manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your ATEM POWER 200W Monocrystalline Solar Panel. This portable solar suitcase is designed for outdoor use, providing reliable power for 12V batteries in RVs, camping setups, and other off-grid applications. It features a 20A MPPT controller and a USB output for charging various devices.

Figure 1.1: The ATEM POWER 200W Monocrystalline Solar Panel and its included accessories.

2. Ozi nchekwa

Please read and understand all safety instructions before installing or operating the solar panel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Achịkọtala: Do not attempt to disassemble, repair, or modify the solar panel or controller. Refer all servicing to qualified personnel.
• Ikuku ikuku nke ọma: Ensure adequate ventilation around the MPPT controller during operation to prevent overheating.
• Mkpughe mmiri: While the panel is designed for outdoor use, avoid submerging the controller in water. Protect connections from moisture.
• Njikọ eletrik: Ensure all electrical connections are secure and correctly polarized before connecting to a battery or device. Incorrect wiring can cause damage.
• ndakọrịta batrị: Only connect to compatible battery types as specified in the specifications section (AGM, lead acid, Gel, Calcium & LiFePO4 batteries).
• Ụmụaka na anụ ụlọ: Keep the solar panel and its components out of reach of children and pets.
• Ijikwa: Jisie panel anyanwụ ike nke ọma. Zere ịda ma ọ bụ mee ka ọ daa ma ọ bụ mee ka ọ ghara inwe mmetụta siri ike.
• Okpomọkụ: Do not operate the solar panel outside its specified temperature range (refer to specifications).

3. Ihe ngwugwu

Verify that all items listed below are present and undamaged upon opening the package. If any items are missing or damaged, contact customer support.

• 1 x 200W Foldable Monocrystalline Solar Panel
• 1 x 20A MPPT Njikwa anyanwụ
• 1 x 500CM Cable with 50A Anderson Plug
• 1 x 50CM Cable with Alligator Clamps & 50A Anderson Plug
• 1 x akpa akpa
• Akwụkwọ ntuziaka onye ọrụ 1 x (akwụkwọ a)

Figure 3.1: Contents of the ATEM POWER 200W Solar Panel package.

4. Atụmatụ igodo

The ATEM POWER 200W Monocrystalline Solar Panel is engineered with advanced features for optimal performance and durability:

• Monocrystalline Solar Cells: Utilizes A-grade monocrystalline solar cells with an energy conversion efficiency of up to 21%. Premium PET films ensure a light penetration rate of 95%.


Figure 4.1: High-efficiency monocrystalline solar cells.

• Onye njikwa MPPT: Equipped with a 20A MPPT (Maximum Power Point Tracking) controller, which harvests up to 20% more energy compared to traditional PWM controllers. It also features an auto-optimization function for immediate reconnection after any interruption.
• Nhazi dị arọ na nke enwere ike ibugharị: Manufactured without glass, this solar panel weighs approximately 15.32 pounds (6.95kg). Its foldable design and robust carrying handle enhance portability, making it easy to transport.

Figure 4.2: The solar panel's portable and foldable design.
• Integrated Kickstands: Built-in kickstands allow for easy adjustment of the panel's angle to optimize solar energy harvesting throughout the day.


Figure 4.3: Integrated kickstands for optimal sun exposure.

• Ihe owuwu na-adịgide adịgide: Features anodized aluminum frames, reinforced corner protectors, and PET construction for enhanced durability, heat transfer, and resistance to dirt, corrosion, heat, and UV.


Figure 4.4: PET construction layers for durability.

• Diode Bypass Technology: Protects shaded cells from overheating and minimizes power loss caused by partial shading.
• Multiple Functionality: Compatible with various 12V battery types including AGM, lead acid, Gel, Calcium, and LiFePO4. Includes a 5V 1.5A USB port for direct charging of portable devices like smartphones and digital cameras.

5. Nhazi ntuziaka

Follow these steps to set up your ATEM POWER 200W Monocrystalline Solar Panel:

1. Ịkwapu: Carefully remove all components from the packaging and verify against the "Package Contents" list.
2. Họrọ ebe: Select a location that receives maximum direct sunlight throughout the day. Avoid shaded areas from trees, buildings, or other obstructions.
3. Unfold Panel: Unfold the solar panel completely. The integrated kickstands will allow you to prop up the panel.
4. Gbanwee akụkụ: Adjust the kickstands to angle the panel directly towards the sun. For optimal performance, the panel should be perpendicular to the sun's rays.
5. Connect MPPT Controller: The 20A MPPT controller is integrated. Ensure its connections are secure.
6. Jikọọ na batrị:
   • Using the 50CM cable with alligator clamps and 50A Anderson plug: Connect the alligator clamps to your 12V battery terminals (red to positive, black to negative). Then connect the Anderson plug to the corresponding port on the solar panel's integrated controller.
   • Using the 500CM cable with 50A Anderson plug: If your battery system has an Anderson plug input, connect this cable directly from the solar panel to your battery system.

   Ihe dị mkpa: Always connect the solar panel to the battery mbụ exposing the panel to sunlight to prevent damage to the controller. Disconnect the panel from the battery mbụ folding or moving it.
7. Jikọọ Ngwaọrụ USB (Nhọrọ): If charging portable devices, connect them to the 5V 1.5A USB port on the MPPT controller.

6. Ntuziaka ọrụ

Once set up, the ATEM POWER 200W Monocrystalline Solar Panel operates largely automatically. The MPPT controller will manage the charging process to your 12V battery.

• Nleba anya: The MPPT controller typically has indicators (LEDs or a small display) to show charging status and battery voltage. Refer to the controller's specific manual for detailed monitoring information.
• Arụmọrụ kacha mma: For best results, periodically check the panel's orientation and adjust its angle to face the sun directly as the sun moves across the sky.
• Ndo: Even partial shading of the panel can significantly reduce its output. Position the panel to avoid any shadows. The diode bypass technology helps mitigate power loss from shading, but full sun exposure is always ideal.
• Nchaji USB: The USB port provides a stable 5V 1.5A output for charging small electronic devices. Ensure your device is compatible with these charging specifications.
• Nchekwa: When not in use, disconnect the panel from the battery, fold it, and store it in its carry bag in a cool, dry place away from direct sunlight.

7. Nlekọta

Regular maintenance ensures the longevity and optimal performance of your solar panel.

• Nhicha:
  • Periodically clean the surface of the solar panel to remove dust, dirt, leaves, or other debris that may accumulate and reduce efficiency.
  • Use a soft cloth and mild, non-abrasive cleaning solution with water. Do not use harsh chemicals or abrasive materials that could scratch the panel surface.
  • Ensure the panel is dry before folding or storing.
• Nyochaa njikọ: Regularly check all electrical connections (Anderson plugs, alligator clamps) for corrosion, looseness, or damage. Ensure they are clean and secure.
• Nyocha anụ ahụ: Inspect the panel for any physical damage, such as cracks, dents, or frayed cables. If damage is found, discontinue use and contact customer support.
• Nchekwa: Store the folded solar panel in its protective carry bag in a dry, cool environment when not in use for extended periods.

8. Nchọpụta nsogbu

This section addresses common issues you might encounter with your solar panel. For problems not listed here, contact customer support.

9. Nkọwapụta

Technical specifications for the ATEM POWER 200W Monocrystalline Solar Panel:

Ọgụgụ 9.1: Akụkụ ngwaahịa.

10. Akwụkwọ ikike & Nkwado

Akwụkwọ ikike: The ATEM POWER 200W Monocrystalline Solar Panel comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or natural disasters.

Nkwado ndị ahịa: For technical assistance, warranty claims, or any questions regarding your product, please contact ATEM POWER customer support. Refer to the contact information provided on the product packaging or the official ATEM POWER websaịtị.

For more information, visit the official ATEM POWER store: ATEM POWER Store on Amazon.