1. Ngwaahịa gafereview
The SunControl 2 is an advanced and innovative charge controller designed for NDS photovoltaic modules. Utilizing MPPT (Maximum Power Point Tracking) technology, it efficiently maximizes energy harvest from any solar panel. It incorporates the latest charging curves to ensure batteries are always optimally charged and maintained over time. Featuring a professional terminal block and updated LIN-BUS/CI-BUS communication protocols, the SunControl 2 is engineered for reliable and permanent installation.
Image: The agc SC350M SunControl 2 solar charge controller, a compact black unit with red accents and various connection ports.
2. Atụmatụ igodo
- Latest generation LIN-BUS and CI-BUS communication protocols.
- Integrated temperature sensor for optimized charging.
- Professional terminal block for secure connections.
- Supports engine battery charging.
- Advanced 5-phase charging curves for battery longevity.
- Built-in desulfation system to maintain battery health.
- Charge status LED indicator for easy monitoring.
- Separate input for solar panels.
- Model SC 350M supports up to 350W of solar panel power.
3. Ntọala na nwụnye
Before installation, ensure all power sources are disconnected. Mount the SunControl 2 in a dry, well-ventilated area, away from direct sunlight and heat sources. Use appropriate gauge wiring for all connections to prevent overheating and ensure optimal performance.
3.1 Njikọ njikọ
- Njikọ batrị: Connect the battery cables to the designated battery terminals on the controller. Ensure correct polarity (positive to positive, negative to negative). It is recommended to connect the battery first.
- Njikọ anyanwụ panel: Connect the solar panel cables to the solar input terminals. Verify correct polarity.
- Njikọ Ibu (Nhọrọ): If using the controller's load output, connect your DC loads to the load terminals. Do not exceed the maximum rated current for the load output.
After all connections are made, double-check polarity and ensure all terminals are securely fastened. Power on the system by connecting the battery, then the solar panels.
4. Ntuziaka ọrụ
The SunControl 2 operates automatically once properly installed. The integrated LED indicator provides visual feedback on the charge status and system operation. Refer to the specific LED patterns in the detailed product manual for comprehensive status interpretation.
4.1 Charge Status Indicator
The LED on the controller indicates the current charging phase and battery status. A steady green light typically indicates a full charge or float mode, while blinking patterns or different colors may indicate bulk charging, absorption, or fault conditions. Consult the full manual for a detailed legend of LED indicators.
5. Nlekọta
The SunControl 2 is designed for low maintenance. Regular checks can help ensure optimal performance and longevity:
- Nhicha: Periodically clean the exterior of the controller with a dry, soft cloth to remove dust and debris. Do not use liquid cleaners.
- Njikọ: Annually inspect all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to power loss or overheating.
- Igwe ikuku: Ensure the area around the controller remains clear to allow for proper airflow and heat dissipation.
6. Nchọpụta nsogbu
If you encounter issues with your SunControl 2, consider the following common troubleshooting steps:
- Enweghị chaja: Check solar panel connections and ensure they are receiving adequate sunlight. Verify battery voltage na njikọ.
- Vol dị alatage: Ensure solar panels are clean and not shaded. Check battery health and capacity.
- LED Error Codes: If the LED displays an unusual pattern, consult the comprehensive manual for specific error code interpretations and solutions.
Maka nsogbu ndị na-adịgide adịgide, kpọtụrụ ndị ahịa.
7. Nka na ụzụ nkọwa
Image: This image displays the technical specifications table for the NDS SunControl 2, comparing SC 320M and SC 350M models, along with a list of key features and an image of the controller.
| Oke | Value (SC350M) |
|---|---|
| Nlereanya | SC350M |
| Elu ọnụ Voltage | 12V |
| Max Module Power | 350W |
| Ọnụ ego kacha dị ugbu a | 24A |
| MPPT System | Ee |
| Fuse nchekwa | 30A |
| Ịchaji batrị | Ee |
| Engine Battery Charging | Ee |
| Onye ofufe | Ee |
| Akụkụ (LxWxH) | 151x90x48 mm |
| ASIN | B099NHY8BP |
| Ntuziaka onye nrụpụta | 93426 |
| Ụbọchị mbụ dị | Julaị 19, 2021 |
8. Akwụkwọ ikike na nkwado
This product comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official agc websaịtị.
For technical support, troubleshooting assistance, or warranty claims, please contact agc customer service through their official channels. Ensure you have your product model (SC350M) and purchase details ready when contacting support.
