1. Okwu mmalite
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Ntuziaka nchekwa
Na-edebe ihe nchekwa nchekwa ndị a mgbe niile iji gbochie ujo eletrik, ọkụ, ma ọ bụ mmerụ ahụ:
- Ngwa a bụ maka naanị ọkachamara.
- Gbaa mbọ hụ na ọkọnọ ọkụ voltage dakọtara na ngwaọrụ chọrọ.
- Ewepụla ngwaọrụ ahụ na mmiri ozuzo ma ọ bụ mmiri.
- Jikọọ ngwaọrụ mgbe ọ bụla na nkwụnye ọkụ kwụsịrị.
- Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Zere ikpughe anya ozugbo na isi iyi ọkụ.
- Gbaa mbọ hụ na ikuku ikuku zuru oke gburugburu unit ahụ iji gbochie ikpo oke ọkụ.
- Always secure the device with a safety cable when mounting overhead.
- Kwụpụ na ike tupu ihicha ma ọ bụ mmezi.
3. Ngwaahịa gafereview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Foto 3.1: N'ihu view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Foto 3.2: N'ihu view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Akụkụ
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Kemeghi arịọnụ mgbodo
- Safety Rope Attachment Point
4. Nhazi
4.1 Na-arịgo
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp ma ọ bụ guzoro.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Njikọ ike
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
4.3 DMX Njikọ (Nhọrọ)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Ntuziaka ọrụ
5.1 Ogwe njikwa
Use the four buttons on the rear panel to navigate the menu and adjust settings:
- NchNhr: Enters the menu or goes back to the previous menu level.
- Elu: Scrolls up through menu options or increases a value.
- N'okpuru: Scrolls down through menu options or decreases a value.
- Tinye: Na-akwado nhọrọ ma ọ bụ tinye n'okpuru menu.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Ọwa | Ọrụ | Oke ọnụ ahịa | Nkọwa |
|---|---|---|---|
| 1 | Nna-ukwu Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Mmetụta Strobe | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Mmemme arụnyere | 0-255 | Selects various pre-programmed light shows |
| 6 | Ọsọ mmemme | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Nchekwa onwe na ọnọdụ: Cycles through pre-programmed light sequences.
- Ụdị ụda na-arụ ọrụ: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Nlekọta
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- Nhicha: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners or solvents.
- Fan and Vent Cleaning: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Nyocha USB: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Nchekwa: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7. Nchọpụta nsogbu
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ike | Power cable disconnected; no power from outlet; blown fuse. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| Enweghị njikwa DMX | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Lights flicker or behave erratically | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| Otu na-ekpo oke ọkụ | Blocked ventilation; operating in high ambient temperature. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | ọkụmaXX |
| Nọmba nlereanya | LIG0016526-000 |
| Isi Iyi Ìhè | 2 x 50W COB Warm White LEDs |
| Ọwa DMX | Ọwa 6 |
| Ụdị njikwa | DMX, Auto, Sound Active, Manual |
| Akụkụ (L x W x H) | 31.2 x 18.7 x 18.5 cm (ihe dị ka 12.28 x 7.36 x 7.28 sentimita) |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Ụdị nwụnye | Ceiling Mount (with bracket) |
| Agba | Nwa |
9. Akwụkwọ ikike na nkwado
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX