THOMSON TT700 Premium Turntable User Manual

1. Okwu mmalite

Daalụ maka ịzụrụasing the THOMSON TT700 Premium Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read this manual thoroughly before use and retain it for future reference.

The TT700 is designed to deliver a high-quality vinyl listening experience, featuring a belt-drive system, an AT91 Audio Technica cartridge, adjustable counterweight, and antiskating control.

2. Ozi nchekwa dị mkpa

• Isi mmalite ike: Ensure the turntable is connected to a 230V AC power supply.
• Nkwanye: Debe ihe na-atụgharị tebụl ahụ n'elu ebe kwụsiri ike, nke dị larịị, ebe anyanwụ na-anaghị apụta kpọmkwem, ebe okpomọkụ na-esi apụta, na uzuzu ma ọ bụ mkpọtụ gabigara ókè.
• Mmiri: Etinyela igwe ahụ n'ime mmiri ozuzo, mmiri ozuzo, ma ọ bụ mmiri mmiri.
• Igwe ikuku: Akwụsịla oghere ikuku.
• Nhicha: Disconnect the power before cleaning. Use a soft, dry cloth. Avoid abrasive cleaners.
• Ije ozi: Anwala ijere unit ahụ n'onwe gị. Kpọtụrụ ndị ọrụ ruru eru ọrụ niile.
• Ụmụaka: Keep out of reach of children. Small parts could be a choking hazard.

3. Ihe ngwugwu

Nyochaa na agụnyere ihe niile ndị a na ngwugwu gị:

• THOMSON TT700 Turntable Unit
• Ebute
• Dust Cover (Removable Transparent Cover)
• AT91 Audio Technica Cartridge (pre-installed or separate)
• Ibu ibu
• Slipmat
• Cable Audio RCA
• RCA to AUX-IN 3.5mm Adapter
• Power Adapter (230V Mains Power Supply)
• Akwụkwọ ntuziaka (akwụkwọ a)

4. Ngwaahịa gafereview

Familiarize yourself with the components of your TT700 turntable:

5. Nhazi ntuziaka

5.1 Mwepu na ntinye

1. Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
2. Debe ihe ntụgharị ahụ n'elu ebe dị larịị, kwụsiri ike, ma dịkwa larịị.
3. Install the transparent dust cover by aligning its hinges with the slots at the back of the turntable.

5.2 Nwụnye efere na eriri

1. Place the platter onto the center spindle.
2. Locate the drive belt (usually pre-installed on the underside of the platter or around the motor pulley). If not pre-installed, carefully stretch the belt around the motor pulley and the inner rim of the platter.
3. Place the slipmat on top of the platter.

5.3 Cartridge and Tonearm Setup

The AT91 Audio Technica cartridge is typically pre-installed. If not, follow the cartridge manufacturer's instructions for installation.

1. Mee ka Tonearm ahụ dị mma: Gently remove the stylus protector. While holding the tonearm, rotate the counterweight at the rear until the tonearm floats freely and is perfectly level.
2. Tọọ Ike Nchọgharị: Once balanced, hold the counterweight stationary and rotate the numbered ring on the counterweight to '0'. Then, rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force for the AT91 cartridge (refer to cartridge specifications, typically 2.0 grams).
3. Set Antiskating: Adjust the antiskating dial (refer to Figure 3) to match the tracking force you set. This helps prevent the stylus from skipping inwards.

5.4 Njikọ ọdịyo

The TT700 features a pre-amplified output, allowing direct connection to an ampsistemu stereo ma ọ bụ lifier.

• Mpụta RCA: Connect the supplied RCA audio cable from the 'LINE/PHONO OUT' jacks on the turntable to the corresponding 'LINE IN' or 'AUX IN' jacks on your ampigwe okwu ma ọ bụ ike okwu.
• AUX-IN 3.5mm: If your audio system only has a 3.5mm AUX-IN, use the supplied RCA to AUX-IN 3.5mm adapter.

5.5 Njikọ ike

1. Connect the power adapter to the DC input jack on the turntable.
2. Plug the power adapter into a suitable 230V AC wall outlet.

6. Ntuziaka ọrụ

6.1 Ịkpọ egwu ndekọ

1. Place a vinyl record on the platter, centered on the spindle.
2. Select the correct playback speed (33 or 45 RPM) using the speed selector switch (refer to Figure 4). For 45 RPM records, you may need a 45 RPM adapter (not included).
3. Move the tonearm lift lever to the 'UP' position to raise the tonearm.
4. Gently move the tonearm over the desired starting groove of the record.
5. Lower the tonearm lift lever to the 'DOWN' position to slowly lower the stylus onto the record. Playback will begin.
6. Use the 'Start/Stop' button to initiate or pause platter rotation.

6.2 Adjusting Pitch

The TT700 features a Pitch Control knob. This allows for fine adjustment of the playback speed.

• Rotate the 'PITCH CONTROL' knob clockwise to slightly increase the playback speed or counter-clockwise to decrease it.

6.3 Stopping Playback and Automatic Return

1. At the end of a record, the tonearm will automatically return to its rest position.
2. To stop playback manually, move the tonearm lift lever to the 'UP' position, then gently guide the tonearm back to its rest.
3. Switch the speed selector to 'OFF' to power down the unit.

7. Nlekọta

7.1 Ịsacha Stylus ahụ

A clean stylus ensures optimal sound quality and extends record life.

• Use a soft stylus brush, brushing gently from back to front (in the direction of the tonearm).
• Do not use excessive force or brush from side to side.

7.2 Nhicha nke Turntable

• Wipe the turntable cabinet and dust cover with a soft, dry, lint-free cloth.
• Avoid using harsh chemicals or abrasive cleaners, as they can damage the finish.

8. Nchọpụta nsogbu

9. Nkọwapụta

• Aha nlereanya: TT700
• Akara: THỌMSON
• Agba: Nwa
• Ụdị ụgbọala: Eriri mbanye
• Ọsọ ọsọ: 33 1/3 RPM, 45 RPM
• Katrij: AT91 Audio Technica
• Atụmatụ: Adjustable Counterweight, Antiskating, Pitch Control, Automatic Tonearm Return, Pre-ampkwadoro
• Njikọ: RCA Line/Phono Output, Auxiliary (via RCA to 3.5mm adapter)
• Ngwa dakọtara: Headphones (via connected amplifier/receiver)
• Ihe: Vinyl (referring to the product's primary use, not construction material)
• Ibu ihe: 4 kilogram
• Ịnye ọkụ: 230V AC

10. Akwụkwọ ikike na nkwado

For warranty information, please refer to the warranty card included with your product or visit the official THOMSON website. For technical support or service inquiries, please contact THOMSON customer service through their official channels.