DEERC 200E 1:10 Large 3S Brushless High Speed RC Car Instruction Manual

Okwu mmalite

This manual provides essential information for the safe operation, maintenance, and troubleshooting of your DEERC 200E 1:10 Large 3S Brushless High Speed RC Car. Please read it thoroughly before first use to ensure optimal performance and longevity of your product.

Kedu ihe dị na Igbe ahụ

• DEERC 200E RC Car (1:10 Scale)
• Batrị Li-ion 2 x 11.1V 1500mAh
• 2 x eriri USB chaja
• Remote Controller (2.4Ghz)
• Ahịhịa maka ihicha
• 2 x PVC Car Shells (different colors)
• Basic Tool Kit (screwdriver, wrench, spare pins/screws)
• Akwụkwọ ntuziaka (akwụkwọ a)

Image: The DEERC 200E RC car with its remote control, two batteries, two charging cables, a cleaning brush, and an extra car shell, all laid out on a white surface.

Melite

1. Ịchaji batrị

Before first use, fully charge both 11.1V 1500mAh Li-ion batteries using the provided USB charging cables. Connect the USB cable to a compatible USB power source (e.g., computer USB port, USB wall adapter). The indicator light on the USB cable will show charging status (refer to the manual for specific light indicators).

Image: An illustration showing the two 3S large capacity batteries and USB charging cables, highlighting the 40+ minutes of driving time.

2. Installing Batteries in the RC Car

Carefully remove the car shell by detaching the body clips. Locate the battery compartment. Insert a fully charged battery and secure it with the battery holder. Connect the battery connector to the car's power port. Ensure connections are firm.

Foto: Ihe na-edoghị anya view of the DEERC 200E RC car showing the internal battery placement and connections.

3. Installing Batteries in the Remote Controller

Open the battery compartment on the remote controller. Insert 3 AA batteries (not included), ensuring correct polarity. Close the compartment securely.

4. Ijikọ Njikwa Remote

Turn on the RC car first, then turn on the remote controller. The indicator lights on both devices will flash and then become solid, indicating successful pairing. If pairing fails, turn off both devices and repeat the process.

Operating the DEERC 200E

The DEERC 200E features a 2.4Ghz proportional control system, allowing for precise speed, throttle, and steering adjustments. It is designed for all-terrain use, including grass, dirt, and sand.

Njikwa ntọala

• Mkpalite trotul: Pull to accelerate forward, push to brake/reverse.
• Ụgbọ ala: Turn left or right to steer the vehicle.
• Mgbanwe Ọsọ: Adjust the maximum speed for different skill levels or terrains.
• Mbelata nlekọta: Fine-tune the steering to ensure the car drives straight.

Image: The DEERC 200E RC car is shown driving through water, kicking up dust, and navigating rocky terrain, demonstrating its 4WD all-terrain capabilities.

Atụmatụ ịrụ ọrụ

• The 200E can reach speeds of 60+ KM/H (approximately 37+ MPH).
• Utilize the dual 11.1V 1500mAh batteries for extended playtime, offering up to 40+ minutes of driving fun.
• The realistic LED headlights are useful for nighttime operation.
• The independent suspension and durable metal components ensure a smooth ride and resilience on rough surfaces.

Nlekọta

• Nhicha: Use the provided brush to remove dirt and debris from the chassis, wheels, and suspension components after each use. Avoid using water directly on electronic parts.
• Nlekọta batrị: Always fully charge batteries before storage and recharge them every 3 months if not in use to maintain battery health. Disconnect batteries from the car when not in use.
• Part Inspection: Regularly inspect the metal spur gears, differential, drive shafts, and shocks for any signs of wear or damage. Replace worn parts promptly to prevent further damage.
• Nchekwa: Store the RC car and accessories in a cool, dry place away from direct sunlight and extreme temperatures.

Foto: Ihe gbawara view of the DEERC 200E chassis, highlighting durable components like the protective steel sheet, 45A ESC, brushless motor, and TPR wearable tires.

Nchọpụta nsogbu

• Ụgbọala anaghị azaghachi: Ensure both car and remote are powered on and batteries are charged. Re-pair the remote controller if necessary.
• Mbelata arụmọrụ: Check battery charge level. Clean any debris from moving parts. Inspect for damaged gears or suspension components.
• Nsogbu nduzi: Adjust the steering trim on the remote controller. Check for obstructions in the steering mechanism or damaged servo.
• ekpo oke ọkụ: Allow the car to cool down after extended use. Avoid continuous high-speed driving without breaks.

Nkọwapụta

• Ụdị: DERC 200E
• Ọkwa: 1:10
• moto: 2845, 4-pole Brushless Motor (19240 RPM)
• ESC: 45A Brushless Waterproof ESC
• Ọsọ kacha elu: 60+ KM/H (37+ MPH)
• Batrị: 2 x 11.1V 1500mAh Li-ion
• Oge ịgba ọsọ: Up to 40+ minutes (per 2 batteries)
• Sistemụ njikwa: 2.4Ghz Proportional Radio Control
• Sistemụ mbanye: 4WD (Mbanye nwere ụkwụ anọ)
• Ujo: Oil-filled Metal Shocks
• Chassis: Fully Metal Integrated Chassis with Protective Steel Sheet
• Arọ: 5.51 pound
• Akụkụ: 14.2 x 11.8 x 5.91 sentimita asatọ

Ntuziaka nchekwa

• Always operate the RC car in open areas away from people, pets, and obstacles.
• Do not operate in wet conditions or near water unless the product is specifically rated as waterproof.
• Debe mkpịsị aka, ntutu, na uwe na-adịghị mma pụọ ​​na akụkụ ndị na-akpụ akpụ.
• A na-atụ aro nlekọta ndị okenye maka ndị ọrụ na-erubeghị afọ 14.
• Do not modify the product as it may affect performance or safety.
• Always turn off the RC car and remote controller when not in use.

Akwụkwọ ikike na nkwado

DEERC offers 24-hour after-sales service. For any issues or inquiries, please contact DEERC customer support through the official websaịtị ma ọ bụ ikpo okwu ịzụrụ ihe.

Refer to the original product packaging or official DEERC websaịtị maka ozi akwụkwọ ikike zuru ezu.