aigo AZ300 Mid Tower Computer Case User Manual

1. Okwu mmalite

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Ozi nchekwa

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Debe obere akụkụ na skru ka ụmụaka ghara ịhụ ya.
• Gbaa mbọ hụ na ntọ ala kwesịrị ekwesị iji gbochie ihe egwu eletrik.

3. Ngwaahịa gafereview

3.1 Panel I/O n'ihu

The front I/O panel provides convenient access to essential ports and controls.

Figure 2: Front I/O Panel Layout

• Ụdị-C Port: 1x USB Type-C port for modern connectivity.
• USB 2.0 ọdụ ụgbọ mmiri: 1x USB 2.0 port for peripheral connections.
• USB 3.0 ọdụ ụgbọ mmiri: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Bọtịnụ ike: Na-agbanyụ ma ọ bụ gbanyụọ kọmputa ahụ.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Ndakọrịta Motherboard: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Ogologo GPU: Maximum GPU length of 400mm.
• Ogologo PSU: Supports standard ATX power supplies up to 200mm.

4. Ntuziaka nwụnye

4.1 Na-akwado ikpe ahụ

1. Debe akpa ahụ n'elu ebe dị larịị ma kwụsie ike.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Foto 4: Akụkụ azụ View of Case

4.2 Nwụnye motherboard

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Chekwaa motherboard site na skru ndị enyere.

Figure 5: Motherboard Mounting Areas

4.3 Ngwa na-enye ike (PSU) nwụnye

1. Locate the PSU mounting area at the bottom rear of the case.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Ntinye draịva nchekwa

1. 2.5" SSDs: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5 "HDDs: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Remove the necessary expansion slot covers from the rear of the case.
2. Tinye kaadị eserese gị ma ọ bụ kaadị mgbasa ozi ndị ọzọ n'ime oghere PCIe kwesịrị ekwesị na motherboard.
3. Chekwaa kaadị ndị ahụ na skru.

4.6 Nwụnye sistemu jụrụ oyi

The aigo AZ300 supports flexible cooling configurations.

• Nkwado ndị fan: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Nkwado Radiator: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Njikwa eriri

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Ọrụ

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Nlekọta

Nlekọta anya mgbe niile na-enyere aka hụ na arụ ọrụ kacha mma yana ogologo ndụ nke akụrụngwa kọmputa gị.

6.1 Nhicha uzuzu uzuzu

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Uzuzu uzuzu PSU: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Nchọpụta nsogbu

• Sistemụ anaghị arụ ọrụ: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Enweghị ngosi: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• ekpo oke ọkụ: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB ports not working: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo websaịtị.