Ntuziaka Onye Ọrụ Dash Cam IROAD NX7

Okwu mmalite

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• IROAD NX7 Main Unit (Front Camera)
• Igwefoto azụ
• Igwefoto Njikọ USB
• OBD-II Power Cable (for general and hybrid vehicles)
• 16GB MicroSD kaadị
• Akwụkwọ ntuziaka (akwụkwọ a)
• Adhesive Mounts
• Ịchaji eriri
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Ngwaahịa gafereview

Familiarize yourself with the components and their functions.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Igwefoto ihu: Records the view through the front windshield.
• LED nche: Indicates recording status and acts as a security deterrent.
• LED ọrụ: Na-egosi ọnọdụ ọrụ nke ngwaọrụ ahụ.
• 3-inch Touch Panel Display: Maka viewna ndu footage, playback, and accessing settings.
• Oghere Kaadị MicroSD: Insert the provided MicroSD card for video storage.
• Ike mgba ọkụ: Ka ịgbanwuo ma ọ bụ gbanyụọ ngwaọrụ.
• DC-IN Power Terminal: Na-ejikọ na eriri ọkụ eletrik.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Connects the rear camera cable.

Igwefoto azụ

• Igwefoto azụ: Records the view through the rear windshield.
• LED ọrụ: Indicates the rear camera's operational status.

Melite

1. MicroSD kaadị ntinye

1. Hụ na agbanyụrụ dashcam ahụ.
2. Locate the MicroSD card slot on the side of the main unit.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Nwụnye igwefoto n'azụ

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Locate your vehicle's OBD-II port (usually under the dashboard on the driver's side).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Route the power cable neatly to avoid interference with driving controls.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Tinye antenna GPS ahụ n'ebe nwere oghere doro anya view of the sky, typically on the dashboard or near the windshield.

Ntuziaka ọrụ

Ịgbanyụ/ Gbanyụọ

• Ike Na: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Gbanyụọ: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Ụdị ndekọ

The IROAD NX7 supports various recording modes:

• Ndekọ na-aga n'ihu: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage as an event file, preventing it from being overwritten.
• Parking Surveillance (24-hour Recording):
  • Nchọpụta ngagharị: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Records when an impact is detected while parked.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Arụ ọrụ Panel

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewna ndekọ

• Na ngwaọrụ: Nweta menu ọkpụkpọ na ihuenyo mmetụ aka iji view recorded videos directly.
• On a Computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD websaịtị) na view and manage recordings.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Nlekọta

MicroSD Card Management

• Nhazi oge niile: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewngwa software.
• Card Lifespan: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Na-ehicha ngwaọrụ

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Ejila ihe nhicha ma ọ bụ ihe mgbaze, ebe ha nwere ike imebi ngwaọrụ.
• Ensure the lenses are clean and free of smudges for clear video quality.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.