Okwu mmalite
This manual provides essential information for the safe and effective operation of your Amazon Basics Class II Cross-Line Laser Level. Please read these instructions thoroughly before use and retain them for future reference.
Ozi nchekwa
WARNING: CLASS II LASER PRODUCT
This device emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at others. Use caution when operating the laser level to prevent accidental exposure.
- Always operate the laser level in a safe manner.
- Anwala ịgbanwe ma ọ bụ kwasawanye ngwaọrụ ahụ.
- Debe ebe ụmụaka na-apụghị iru.
- Ensure the work area is clear of obstructions and reflective surfaces that could redirect the laser beam.
Ihe ngwugwu
- Amazon Basics Class II Cross-Line Laser Level
- L-shaped Magnetic Pivoting Base
- Obere akpa
- Akwụkwọ ntuziaka onye ọrụ
Ngwaahịa gafereview
The Amazon Basics Cross-Line Laser Level is designed to project bright horizontal, vertical, or cross-line laser beams for various leveling and alignment tasks. Its compact design and versatile mounting options make it suitable for indoor and outdoor use.
Akụkụ ndị bụ isi:
- Projects horizontal, vertical, and cross-line green laser beams.
- 59-foot (708 inch) range for indoor and outdoor applications.
- Automatic self-leveling mode for quick and accurate setup.
- Manual mode for locking the laser at desired angles.
- Durable plastic and metal construction with a soft rubber exterior for enhanced grip.
- Battery-operated (AA batteries, not included).
Melite
1. Ntinye batrị
- Locate the battery compartment on the bottom of the laser level.
- Mepee mkpuchi nke batrị batrị.
- Insert two AA batteries (not included), ensuring correct polarity (+/-).
- Mechie mkpuchi nke batrị batrị nke ọma.
2. Ịkwanye ngwaọrụ
The laser level can be used freestanding or mounted using the included L-shaped magnetic pivoting base. The base features a 1/4-inch screw thread for attachment to the laser level and magnets for securing to metallic surfaces. It is also compatible with standard tripods (not included).
Ntuziaka ọrụ
1. Gbanyụọ / gbanyụọ
To turn the device on, slide the lock switch on the side to the unlocked position. To turn off, slide the switch to the locked position.
2. Automatic (Self-Leveling) Mode
When the lock switch is in the unlocked position, the laser level will automatically self-level within 4 degrees. If the device is outside this range, the laser lines will blink to indicate it is not level. Adjust the device's position until the laser lines become solid, indicating a level projection.
3. Usoro ntuziaka
To use the laser at a specific angle (e.g., for stair railings), slide the lock switch to the locked position. The laser lines will remain fixed at the angle you set. The lines may blink in manual mode to indicate that the self-leveling feature is disengaged.
4. Laser Line Selection
Press the power button on top of the device to cycle through different laser line modes: horizontal line, vertical line, or cross-line (both horizontal and vertical).
Nlekọta
- Keep the laser level clean and free of dust and debris. Use a soft, dry cloth for cleaning.
- Store the device in its carrying pouch in a cool, dry place when not in use.
- Wepu batrị ma ọ bụrụ na agaghị eji ngwaọrụ ahụ ogologo oge iji gbochie ntapu.
- Ejila ngwaọrụ ahụ n'ime mmiri ma ọ bụ kpughee ya na oke okpomọkụ.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Laser lines are blinking. | In Automatic mode, the device is not level (outside 4-degree range). In Manual mode, blinking is normal. | In Automatic mode, adjust the device's position until the lines become solid. No action needed in Manual mode. |
| No laser lines. | Batteries are dead or incorrectly installed. Device is off. | Check battery polarity and replace if necessary. Ensure the lock switch is in the unlocked position. |
| Laser lines are dim. | Low battery power. Bright ambient light. | Replace batteries. Use the laser level in areas with less ambient light for better visibility. |
Nkọwapụta
- Akara: Amazon Basics
- Nọmba nlereanya: CLL-002
- Klas Laser: Klas II
- Ụdị laser: Green Cross-Line Laser
- Oke: 59 ft/708 inch
- Oke nhazi onwe: ± 4 ogo
- Ihe: 70% Plastic, 30% metal
- Agba: odo/oji
- Isi mmalite ike: Batrị 2 x AA (anaghị etinye ya)
- Akụkụ ngwaahịa: 2.8" L x 2.4" W x 3.3" H
- Ibu ihe: 12 ounces (0.34 Kilogram)
- Ụdị ọrụ: Akpaaka / Akwụkwọ ntuziaka
Akwụkwọ ikike na nkwado
For warranty information or customer support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Keep your purchase receipt for warranty claims.
