1. Okwu mmalite
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Kedu ihe dị na Igbe ahụ
Biko lelee ọdịnaya nke ngwugwu ahụ ka ị hụ na ihe niile dị:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44-Key IR Remote Control
- 1 x 24V Power Adapter (US Plug)
3. Ozi nchekwa
Read all safety instructions before installation and use. Keep this manual for future reference.
- Eji ime ụlọ naanị: This product is designed for indoor use and is not waterproof.
- Ịnye ọkụ: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Elu nwụnye: Ensure the installation surface is clean, dry, and smooth for optimal adhesive performance.
- Ịcha eriri ahụ: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Zere ikpo oke ọkụ: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Ụmụaka na anụ ụlọ: Keep the product and its components out of reach of children and pets.
4. Ntọala & nwụnye
Soro usoro ndị a maka nrụnye nke ọma:
- Kwadebe elu: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Tụọ ma bee (ọ bụrụ na ọ dị mkpa): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Attach the Strip: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Njikọ Ike: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Gbanyụọ igwe anya: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Ntuziaka ọrụ
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Ọrụ njikwa anya:
- Gbanyụọ/ Gbanyụọ: Power button to turn the lights on or off.
- Ndozi ihie: Jiri ihe ↑ na ↓ buttons to increase or decrease brightness.
- Nhọrọ agba: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- DIY Colors: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Pịa a Mee N'onwe Gị bọtịnụ.
- Jiri ihe ↑ na ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Pịa otu ihe ahụ Mee N'onwe Gị button again to save your custom color.
- Nhọrọ ụdị: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- FLASH: Jumps between colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- UTgbọala: Cycles through all modes.
- Ngwa ngwa/nwayọọ: Adjusts the speed of dynamic modes.
Figure 6: Remote control in use for ambient lighting.
6. Nlekọta
Proper maintenance ensures the longevity of your LED strip lights.
- Nhicha: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Nchekwa: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Zere ịgbagọ: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. Nchọpụta nsogbu
Ọ bụrụ na ị na-enwe nsogbu, rụtụ aka na nsogbu ndị a na-ahụkarị na ngwọta ndị a:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ọkụ anaghị agbanwu. |
|
|
| Njikwa anya anaghị anabata ya. |
|
|
| Agba ezighi ezi ma ọ bụ ekwekọghị ekwekọ. |
|
|
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | ekpenta |
| Nọmba nlereanya | PR410116-RGB-US |
| Ụdị isi iyi ọkụ | LED (5050 SMD) |
| Agba ọkụ | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Ogologo | 39.4 ụkwụ (12m) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 Watts (Max dakọtara) |
| Usoro njikwa | 44-Key IR Remote Control |
| Njirimara Pụrụ Iche | Color Changing, Dimmable, 8 Dynamic Modes |
| Ojiji ime ime/n'èzí | Naanị ime ụlọ |
| Ihe onwunwe | Ọla kọpa, Plastic |
| Ibu Ibu | 9.6 ounces |
| Ndekọ ngosi agba (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Akwụkwọ ikike & Nkwado
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro websaịtị.
Ozi mkpọtụrụ:
- Websaịtị: www.lepro.com (Biko lelee onye ọrụ gọọmentị ahụ website for the most up-to-date contact information.)
- Email: Rụtụ aka na nkwakọ ngwaahịa ma ọ bụ websaịtị.
