Ngwaahịa gafereview
The Feit Electric FC8/3CCT/LED is an 8-inch non-dimmable LED circline light bulb designed for indoor use. This bulb offers selectable color temperatures, allowing users to choose between Warm White, Cool White, or Daylight settings using an integrated switch. It provides 1400 lumens of light output with a 15-watt input power and is rated for 25,000 life hours at 120V.
Atụmatụ gụnyere:
- Compact circline design for efficient illumination.
- Easy plug-and-play installation, eliminating the need to replace or remove old ballasts.
- Three selectable color temperatures: Neutral White (3500K), Cool White (4000K), or Daylight (6500K).
- Energy-efficient LED technology with a long lifespan.
- 1400 Lumens brightness, 15 Watt power consumption, 120V operation.
Ozi nchekwa
- Ịdọ aka ná ntị: Ihe egwu nke ujo eletriki. Kwụpụ ike tupu etinyere ma ọ bụ rụzie ya.
- Do not use with dimmers. This bulb is non-dimmable.
- Ensure the fixture is rated for the bulb's voltagE (120V).
- Do not disassemble the bulb. There are no user-serviceable parts inside.
- Kwesịrị ekwesị maka damp locations, but not for direct exposure to water.
Ntọala na nwụnye
This LED circline bulb is designed for easy replacement of existing fluorescent circline lamps without requiring ballast removal or rewiring. Follow these steps for proper installation:
- Gbanyụọ ike: Before beginning installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
- Wepụ bọlbụ ochie: Carefully remove the existing fluorescent circline lamp site na ngwa ngwa.
- Họrọ okpomoku agba: Locate the integrated switch on the side of the Feit Electric FC8/3CCT/LED bulb. Before installing, slide the switch to your desired color temperature: Neutral White (3500K), Cool White (4000K), or Daylight (6500K). Note: This switch is difficult to access once installed, so select your preferred color before installation.
- Wụnye bọlbụ ọhụrụ: Insert the pins of the new LED circline bulb into the lamp holder of your fixture. Ensure it is securely seated.
- Weghachi ike: Ozugbo etinyere bọlbụ ahụ nke ọma, weghachi ike na nrụnye ahụ.
Image: Feit Electric FC8/3CCT/LED circline bulb with its integrated switch for color temperature selection. The switch allows selection between Neutral White (3500K), Cool White (4000K), and Daylight (6500K) before installation.
Image: Product packaging for the Feit Electric 8-inch Circular Lamp, highlighting its selectable white feature and key specifications like 15W power usage, 1400 lumens, and T9 replacement.
Ntuziaka ọrụ
Once installed, the Feit Electric FC8/3CCT/LED bulb operates like a standard light bulb. Use your existing wall switch to turn the light fixture on or off.
- Nhọrọ okpomọkụ agba: The desired color temperature (Warm White, Cool White, or Daylight) must be selected using the switch on the bulb itself mbụ installation. It cannot be changed via the wall switch.
- Enweghị ike ịkwụsị: This bulb is not compatible with dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
Nlekọta
The Feit Electric FC8/3CCT/LED bulb requires minimal maintenance.
- Nhicha: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ndochi: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the "Setup and Installation" steps in reverse to remove the old bulb and install a new one.
Nchọpụta nsogbu
If you experience issues with your Feit Electric FC8/3CCT/LED bulb, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe ọkụ anaghị agba ọkụ. | Enweghị ikike na ngwa. Bulb not properly installed. Bọọlụ ezighi ezi. | Lelee ihe nbibi/fuse sekit. Ensure bulb pins are fully seated in the lamp njide. Test bulb in a known working fixture or replace. |
| Ìhè na-egbuke egbuke ma ọ bụ na-acha uhie uhie. | Mgbanwe dimmer na-ekwekọghị ekwekọ. Njikọ rụrụ arụ. | This bulb is non-dimmable. Remove any dimmer switches and use a standard on/off switch. Re-seat the bulb firmly. |
| Okpomọkụ agba na-ezighi ezi. | Edobere mgba ọkụ CCT nke na-ezighi ezi. | Turn off power, remove bulb, and adjust the CCT switch to the desired setting before re-installing. |
Nkọwapụta
| Nkọwapụta | Uru |
|---|---|
| Aha Nlereanya | FC8/3CCT/LED |
| Ụdị | Igwe ọkụ eletrik |
| Ụdị ọkụ | Ikanam |
| Njirimara Pụrụ Iche | Non Dimmable, Selectable Color Temperature |
| Wattage | 15 Watt |
| Incandescent Equivalent Wattage | 22 Watt |
| Nha Ụdị Bọlbụ | FC8 (8-inch Circline) |
| Isi Bulb | GX53 |
| Voltage | 120 volts |
| Icha ọkụ | 1400 Lumen |
| Nhọrọ okpomọkụ agba | Neutral White (3500K), Cool White (4000K), Daylight (6500K) |
| Nkezi Ndụ | 25,000 Hours (approx. 2.86 Years) |
| Ojiji ime ime/n'èzí | Indoor (Suitable for Damp Ebe) |
| Ihe onwunwe | Plastic |
| Akụkụ ngwaahịa | 8"W x 8"H x 1.5"D |
| Asambodo | ETL Listed, FCC Compliant |
Akwụkwọ ikike na nkwado
For warranty information regarding your Feit Electric FC8/3CCT/LED bulb, please refer to the documentation included with your purchase or visit the official Feit Electric websaịtị.
If you require further assistance, technical support, or have questions not covered in this manual, please contact Feit Electric customer service directly. Contact details can typically be found on the product packaging or their official websaịtị.
Feit Electric Official Websaịtị: www.feit.com
