1. Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Foto 1.1: N'ihu view of the SEBSON Outdoor Motion Detector.
2. Ntuziaka nchekwa
Na-edebe nchekwa nchekwa ndị a mgbe niile iji gbochie mmerụ ahụ ma ọ bụ mebie ngwaọrụ:
- Nchekwa Eletriki: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Voltage: Gbaa mbọ hụ na vol na -arụ ọrụtage of 230V AC matches your electrical supply.
- Ogo IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Ịkwanye: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Ụmụaka: Keep packaging materials and small parts away from children.
3. Ihe ngwugwu
Ngwungwu ahụ gụnyere:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Ngwaahịa gafereview na Atụmatụ
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Oke nchọpụta: Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- LED dakọtara: Na-akwado LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Nhazi na-adịgide adịgide: IP44 rated for outdoor use, anthracite color, made of plastic.
Foto 4.1: Ofeview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Ntọala na nwụnye
Soro usoro ndị a maka nrụnye nke ọma:
- Kwadebe maka nwụnye: Tupu ịmalite, hụ na agbanyụrụ isi ike dị na ebe nrụnye ahụ na ihe mgbawa sekit ahụ.
- Họrọ Ebe Nkwanye: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Ịkwanye Base:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Gwuo oghere n'ebe akara akara. Tinye ihe mkpuchi mgbidi kwesịrị ekwesị ma ọ bụrụ na ọ dị mkpa.
- Secure the detector's base firmly to the wall using screws.
- Njikọ waya: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Foto 5.1: Ọpụample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Mechie Ụlọ: Carefully close the detector housing, ensuring no wires are pinched.
- Weghachi ike: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Ntuziaka na Mgbanwe Ọrụ
The motion detector features two adjustable dials for customizing its operation:
Foto 6.1: nso nso view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Turn the dial towards the sun icon for activation in brighter conditions (e.g., during the day).
- Turn the dial towards the moon icon for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Nlekọta
To ensure optimal performance and longevity of your motion detector:
- Nhicha: Regularly clean the sensor lens and the outer casing with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Nyocha: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Ihe na-akpata gburugburu: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Nchọpụta nsogbu
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanye ma a chọpụta mmegharị ahụ. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Onye nrụpụta | SEBSON |
| Nọmba nlereanya | IR_OUT_BA |
| Akụkụ ngwaahịa (L x W x H) | 8.6 x 6 x 9.6 cm |
| Ibu | 155 grams |
| Agba | Anthracite |
| Ihe onwunwe | Plastic |
| Isi Iyi Ike | AC |
| Voltage | 230 volts |
| Max. Power (LED) | 300 Watt |
| Max. Power (Incandescent) | 1200 Watt |
| Usoro ntinye | Wall Mount (Surface-Mounted) |
| Bulb Type Compatibility | Ikanam |
| Oke nchọpụta | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | Sekọnd 10 - nkeji 7 |
| Ambient Brightness (LUX) | 3 - 2000 lux |
| Ogo IP | IP44 |
| Eji akwadoro | N'èzí |
| Okpomọkụ Dị Elu | 40 Ogo Celsius |
| Mba onye si | China |
10. Akwụkwọ ikike na nkwado
Iwu nloghachi: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Nkwado ndị ahịa: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
