1. Okwu mmalite
This manual provides instructions for the safe and efficient operation of your Lepro PR210002-US LED Table Lamp. Nke a dị iche iche lamp offers a range of lighting options, including tunable white light, RGB color changing, dimming capabilities, and an auto-off timer. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Lepro PR210002-US LED Table Lamp.
2. Ihe ngwugwu
Before proceeding with setup, please ensure all components are present:
- 1 x Lepro PR210002-US LED Table Lamp
- 1 x ihe nkwụnye ọkụ US
- 1 x Ụdị USB USB
- Akwụkwọ ntuziaka onye ọrụ 1 x (akwụkwọ a)
3. Nhazi
Follow these steps to set up your LED Table Lamp:
- Ịkwapu: Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
- Njikọ Ike: Insert the Type C USB cable into the lamp's charging port. Connect the other end of the USB cable to the provided US power adapter, then plug the adapter into a standard wall outlet.
Figure 2: Connecting the lamp to power. The lamp measures 3.9 inches in diameter and 7.1 inches in height, with a 4.9 ft cable.
4. Ntuziaka ọrụ
The Lepro LED Table Lamp features intuitive touch controls located on the top surface and the base.
Figure 3: Touch Control Overview.
4.1. Gbanyụọ / gbanyụọ
- Mpempe akwụkwọ Lightly tap the top touch area (power symbol) to turn the lamp gbanye ma ọ bụ gbanyụọ.
4.2. Adjusting White Light (Tunable White Mode)
Ndị lamp offers three white light temperatures: 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White).
- Gbanwee okpomọkụ: Press the 'M' button on the lamp's base to cycle through the white light temperatures (2700K → 4000K → 5700K).
- Gbanwee ihie: While in any white light mode, Ogologo Pịa the top touch area to continuously adjust the brightness from 5% to 100%. Release when desired brightness is reached.
Figure 4: Tunable White Light Options (2700K, 4000K, 5700K).
4.3. RGB Color Changing Modes
Ndị lamp features 7 static RGB colors and an auto-color changing mode.
- Access RGB Modes: Press the 'M' button repeatedly until the lamp enters RGB mode.
- Select Static Color: While in RGB mode, Ogologo Pịa the top touch area to cycle through the 7 available colors. Release when your desired color is displayed.
- Auto Color Changing: Continue pressing the 'M' button after the static RGB colors to activate the auto-color changing mode.
- Adjust Speed (Auto Mode): While in auto-color changing mode, Ogologo Pịa the top touch area to adjust the speed of the color transitions (3-level speed).
Figure 5: RGB Color Changing Mood Light.
4.4. Ngụ oge na-agbanyụ onwe ya
Ndị lamp includes a convenient auto-off timer function for 30 or 60 minutes.
- Tinye ngụ oge: Press the timer button (clock symbol) on the lamp's base.
- Oge nkeji 30: One press activates the 30-minute timer (indicated by one green LED on the base).
- Oge nkeji 60: A second press activates the 60-minute timer (indicated by two green LEDs on the base).
- Deactivate Timer: A third press will turn off the timer function (no green LEDs).
Figure 6: Auto-Off Timer Function.
4.5. Ọrụ ebe nchekwa
Ndị lamp retains the last used brightness and color setting when turned off and on again, ensuring a consistent experience.
5. Nlekọta
Iji hụ na ogologo ndụ na arụmọrụ kachasị mma nke l gịamp, soro ntuziaka mmezi ndị a:
- Nhicha: Kwupu njikọ lamp from power before cleaning. Use a soft, dry cloth to wipe the lamp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Ijikwa: Jikwaa lamp with care. Avoid dropping it or subjecting it to strong impacts.
- Nchekwa: Ọ bụrụ na-echekwa lamp for an extended period, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight.
6. Nchọpụta nsogbu
If you encounter issues with your Lepro LED Table Lamp, rụtụ aka na nsogbu na ngwọta ndị a na-ahụkarị:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Lamp adịghị agbanye. | Enweghị njikọ ike. | Ensure the power adapter is securely plugged into a working outlet and the USB-C cable is firmly connected to the lamp. |
| Brightness adjustment is not smooth or lamp turns off when dimming. | Incorrect operation of touch control. | Ensure you are performing a Ogologo Pịa on the top touch area to adjust brightness. A short press will turn the lamp off. Release your finger when the desired brightness is achieved. |
| Colors are not changing or cycling. | Not in RGB mode or incorrect operation. | Press the 'M' button to cycle through modes until RGB mode is active. For static colors, Ogologo Pịa the top touch area. For auto-changing, ensure auto-color changing mode is selected via the 'M' button, then Ogologo Pịa the top touch area to adjust speed. |
| Ọrụ ngụ oge anaghị arụ ọrụ. | Timer not activated or incorrectly set. | Press the timer button on the base. One green LED indicates 30-minute timer, two green LEDs indicate 60-minute timer. Ensure the correct timer setting is active. |
7. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | PR210002-US |
| Ụdị | ekpenta |
| Akụkụ ngwaahịa | 3.9"D x 3.9"W x 7.1"H |
| Ibu Ibu | 0.85 Pound (13.6 ounces) |
| Ihe onwunwe | Plastic |
| Ụdị isi iyi ọkụ | Ikanam |
| Icha ọkụ | 350 Lumen |
| Wattage | 7 watt |
| Voltage | 120 volts (AC) |
| Nhọrọ Agba Dị Ọcha | 7 Colors + 3 White Light Temperatures (2700K-4000K-5700K) |
| Usoro njikwa | Metụ aka |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Ogologo eriri USB | 4 ụkwụ |
| Ojiji ime ime/n'èzí | Iji ime ụlọ naanị |
| Ọkwa Nguzogide mmiri | Ọ bụghị mmiri na-eguzogide |
8. Akwụkwọ ikike na nkwado
For warranty information or technical support, please contact Lepro customer service through their official website or the retailer where the product was purchased. Please have your model number (PR210002-US) and purchase details ready when contacting support.
