1. Ngwaahịa gafereview
The OSRAM LED Micro Pin G4 bulb is a low-voltage LED alternative designed to replace traditional 10W halogen lamps. It features an extremely small form factor, making it suitable for various applications. This bulb provides a warm white light at 2700 Kelvin, ideal for creating atmospheric light accents in living spaces and decorative settings. It is compatible with both DC and AC 12V systems.
Akụkụ ndị bụ isi:
- Ike ike: Consumes only 1W, equivalent to a 10W incandescent bulb.
- Ogologo ndụ: Up to 15,000 hours and 100,000 switching cycles.
- Instant Full Light: No warm-up time required.
- Ìhè Ọcha Na-ekpo ọkụ: 2700K for a comfortable and relaxing ambiance.
- Nhazi kọmpat: Extremely small size for versatile use.
- Mgbapụta ọkụ dị ala: Operates with significantly less heat compared to traditional bulbs.
- Mercury-efu: Environmentally friendly design.
Figure 1: Packaging of the OSRAM LED Micro Pin G4 bulb, highlighting its features and specifications.
2. Ntọala na nwụnye
This LED bulb is designed for easy replacement of existing G4 halogen bulbs. Ensure compatibility with your fixture's voltage (12V AC/DC) before installation.
Akpachara anya maka nchekwa:
- Always turn off the power supply to the fixture before installing or replacing the bulb.
- Allow the old bulb to cool down completely before handling.
- Do not touch the electrical contacts with bare hands during installation.
- This bulb is rated IP20; it is not waterproof. For outdoor applications, it must be used within appropriate, sealed luminaires.
Nzọụkwụ nwụnye:
- Gbanyụọ ike: Locate the power switch or circuit breaker controlling the light fixture and turn it off.
- Wepụ bọlbụ ochie: Carefully pull the old G4 halogen bulb straight out from its socket.
- Fanye bọlbụ ọhụrụ: Align the two pins of the OSRAM LED Micro Pin G4 bulb with the holes in the G4 socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
- Weghachi ike: Gbanyụọ ọkụ ọkụ azụ.
- Nwalee: Switch on the light to ensure the bulb is functioning correctly.
Ọgụgụ 2: Zuru ezu view of the OSRAM LED Micro Pin G4 bulb, showing its G4 base pins.
3. Ntuziaka ọrụ
The OSRAM LED Micro Pin G4 bulb operates like a standard light bulb. Once installed, simply use the existing light switch to turn the light fixture on or off.
- Ọkụ ngwa ngwa: The bulb will provide full brightness immediately upon switching on, with no warm-up period.
- Agba ọkụ: Emits a warm white light (2700K) suitable for creating a cozy and inviting atmosphere.
- Igha: This bulb is not explicitly stated as dimmable in the specifications. Using it with a dimmer switch not designed for non-dimmable LEDs may cause flickering or damage.
Ọgụgụ 3: Ọpụample of the warm ambient lighting provided by LED bulbs in a living room setting.
4. Nlekọta
The OSRAM LED Micro Pin G4 bulb requires minimal maintenance due to its long lifespan and durable design.
- Nhicha: If the bulb becomes dusty, turn off the power and allow it to cool. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Ndochi: With an average lifespan of 15,000 hours, frequent replacement is not expected. When replacement is necessary, follow the installation steps outlined in Section 2.
- mkpofu: This product contains an energy class 'F' bulb. Dispose of the bulb according to local regulations for electronic waste. The light source can be easily removed from the product for separate disposal if required by local regulations.
5. Nchọpụta nsogbu
If you encounter issues with your OSRAM LED Micro Pin G4 bulb, refer to the following common troubleshooting steps:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe ọkụ anaghị agba ọkụ | No power to the fixture; Bulb not properly seated; Faulty bulb; Incorrect voltage. | Check power supply/circuit breaker; Ensure bulb is fully inserted into socket; Test with another known working bulb; Verify fixture provides 12V AC/DC. |
| Bulb na-amagharị | Incompatible dimmer switch; Loose connection; Voltagna mgbanwe. | Remove dimmer or replace with LED-compatible dimmer; Ensure bulb is securely seated; Consult an electrician for voltage kwụsie ike. |
| Ìhè dị oke inyoghi ma ọ bụ na-egbuke egbuke | bọlbụ wat na-ezighi ezitage for application; Fixture design. | Ensure 1W (10W equivalent) is appropriate for your needs; Consider fixture design limitations. |
6. Nkọwapụta
Detailed technical specifications for the OSRAM LED Micro Pin G4 bulb.
| Nkọwapụta | Uru |
|---|---|
| Ụdị | OSRAM |
| Onye nrụpụta | LEDVANCE |
| Nọmba nlereanya | LED PIN MICRO 12 V (4058075523098) |
| Akụkụ ngwaahịa (L x W x H) | 3 x 1 x 1 cm |
| Ibu Ibu | 1.9 grams |
| Ogo IP | IP20 |
| Ọnụọgụ nke ihe | 1 |
| Style (Equivalent) | 10 W |
| Agba | Warm White 2700 K |
| Ụdị | Tubular (T) |
| Ihe onwunwe | Silikoni |
| Ngwa gụnyere | 1 LED pin bulb |
| Voltage | 12 volts |
| Ojiji akọwapụtara | Ihe ndozi |
| Atụmatụ pụrụ iche | Ịrụ ọrụ ike |
| Ụdị bọlbụ | Ikanam |
| Ụdị okpu | G4 |
| Flux na-egbuke egbuke | 100 lm |
| Oriri ike | 1 Watt |
| Incandescent Dị | 10 Watt |
| Okpomọkụ agba | 2700 Kelvin |
| Ndekọ ngosi agba (CRI) | 80 |
| Nkezi ndụ | Awa 15,000 |
| Angle Beam | 300 ogo |
| Klas arụmọrụ ike | F |
| Mba onye si | Germany |
For more detailed product information, including the official energy label and technical data sheet, please refer to the EPREL database: https://eprel.ec.europa.eu/qr/522870
Figure 4: Energy label for the OSRAM LED Micro Pin G4 bulb, indicating energy class F.
7. Akwụkwọ ikike na nkwado
Ozi akwụkwọ ikike:
This OSRAM LED Micro Pin G4 bulb comes with a akwụkwọ ikike afọ atọ site na ụbọchị ịzụrụ. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
Nkwado ndị ahịa:
For technical assistance, warranty claims, or any product-related inquiries, please contact LEDVANCE customer care:
- Email: service@ledvance.com
- Websaịtị: http://www.ledvance.com
Adreesị onye nrụpụta:
Ụlọ ọrụ LEDVANCE GmbH
Ịdọba ụgbọala 29-33
85748 na-agba ọsọ
Germany
