FOXLUX 4-inch 5CCT Selectable LED Recessed Ceiling Light Instruction Manual

Okwu mmalite

Thank you for choosing FOXLUX Recessed Lighting. This manual provides detailed instructions for the safe installation, operation, and maintenance of your 4-inch 5CCT Selectable LED Recessed Ceiling Lights. These ultra-thin, dimmable downlights are designed for both commercial and residential use, offering versatile lighting solutions with adjustable color temperatures.

Ozi nchekwa

Please read all instructions carefully before installation. Failure to do so may result in electric shock or other hazards. Always consult a qualified electrician if you are unsure about any part of the installation process.

• Always turn off power at the circuit breaker before beginning installation or maintenance.
• Gbaa mbọ hụ na njikọ eletrik niile na-agbaso koodu na iwu obodo yana koodu eletriki mba (NEC).
• Do not install in locations where the operating temperature exceeds the fixture's rated temperature.
• Emebere ngwaahịa a maka ime ụlọ.
• The fixture is IC rated, meaning it is suitable for direct contact with insulation.

Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

• FOXLUX 4-inch 5CCT Selectable LED Recessed Downlight (Quantity: 12)
• Integrated J-Box (Quantity: 12)
• Akwụkwọ ntuziaka onye ọrụ (Akwụkwọ a)

Foto: Ofeview of the FOXLUX 4-inch 5CCT LED Recessed Lighting 12-pack, showing the ultra-thin light fixtures and their integrated J-boxes.

Atụmatụ igodo

• 5 CCT Selectable: Easily switch between 2700K (Soft White), 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight) using a switch on the J-box.
• IC kwadoro: Approved for direct contact with insulation, ensuring safety and preventing fire hazards in ceiling spaces.
• High Brightness & Energy Efficiency: 650 Lumens while consuming only 9 Watts, equivalent to a 110W halogen lamp, leading to significant energy savings.
• Nhazi dị oke mkpa: Requires minimal ceiling space (as small as 0.4 inches thickness), fitting various ceilings and joists.
• Enwere ike ibelata: Smooth dimming from 10% to 100% with most standard dimmers.
• Ihe owuwu na-adịgide adịgide: Made from aluminum for long-lasting performance.
• Asambodo: ETL, FCC, and Energy Star certified for high standards of quality and safety.

Image: Diagram illustrating the 5 CCT (Correlated Color Temperature) options available, ranging from 2700K to 5000K, highlighting the ease of changing color temperature with a switch.

Image: Visual representation of the stepless dimming capability, showing the light transitioning from 100% brightness to 10% brightness, compatible with most dimmers.

Ntọala na nwụnye

Ngwa achọrọ:

• Ihe teepu
• Hole Saw (Recommended size: 4.25 inches)
• Waya Strippers
• Screwdriver
• Ugogbe nchekwa na uwe aka

Image: Detailed product dimensions, showing a diameter of 120mm (4.72 inches) and an ultra-thin thickness of 10mm (0.4 inches). The advised hole cutout size is 4.25 inches.

Nzọụkwụ nwụnye:

1. Gbanyụọ ike: Before starting, ensure the power to the installation area is turned off at the circuit breaker to prevent electric shock.
2. Mpempe oghere: Using a hole saw, cut a 4.25-inch to 4.5-inch diameter hole in the ceiling at the desired location. Ensure there are no obstructions like pipes or wires behind the cutting area.
3. Jikọọ Wiring: Open the J-box cover. Connect the household electrical wires (Live, Neutral, Ground) to the corresponding wires inside the J-box using wire nuts. Ensure all connections are secure.
4. Jikọọ Fixture na J-Box: Connect the cable from the LED downlight fixture to the J-box. Ensure the connection is firm and secure.
5. Place J-Box: Tuck the J-box into the ceiling hole.
6. Ndozi echedoro: Push the spring-loaded clips on the sides of the downlight fixture upwards. Insert the fixture into the ceiling hole. The clips will spring back down, securing the light firmly against the ceiling.
7. Weghachi ike: Ozugbo etinyere ihe nrụnye ahụ nke ọma, gbanye ọkụ azụ na igwe mgbawa sekit.

Image: Visual guide demonstrating the four easy installation steps: cutting the hole, connecting wires with wire nuts, connecting the fixture to the hardwire box, and pushing the spring-loaded clips to fix the fixture in place.

Ntuziaka ọrụ

Color Temperature Selection (5CCT)

Your FOXLUX recessed light features 5 selectable color temperatures. To change the color temperature, locate the small switch on the side of the integrated J-box. Slide the switch to select your desired color temperature: 2700K (Soft White), 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).

Image: A diagram illustrating the location of the 5CCT selection switch on the J-box, with examples of each color temperature from 2700K to 5000K.

Ọrụ ebelata

These lights are designed to be dimmable from 10% to 100% with most standard LED dimmers. Ensure you are using a compatible dimmer switch for optimal performance. Adjust the dimmer switch to achieve your desired brightness level.

Nlekọta

FOXLUX LED recessed lights require minimal maintenance. To clean the fixture, ensure the power is off at the circuit breaker. Use a soft, dry cloth to wipe the surface. Avoid using abrasive cleaners or solvents, as they may damage the finish or electrical components.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

FOXLUX provides a Akwụkwọ ikike nke afọ 5 for this product, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided on the product packaging or the official FOXLUX brand store on Amazon. You can visit the FOXLUX Store at amazon.com/stores/FOXLUX.