Okwu mmalite
The PowerWalker VFI AT series is an online Uninterruptible Power Supply (UPS) system designed to provide reliable power protection for critical electronic devices. This manual provides essential information for the safe and efficient operation of your PowerWalker VFI 3000 AT UPS, model 10122182.
Ntuziaka nchekwa dị mkpa
Please read and follow all instructions carefully before installing, operating, or servicing the UPS. Keep this manual for future reference.
- This UPS contains hazardous voltages. Anwala ịgbasa ihe ahụ. Ndị ọrụ ruru eru kwesịrị ịrụ ọrụ ahụ naanị.
- A ga-ejikọrịrị UPS ahụ na ebe a na-ere ọkụ eletrik AC.
- Do not block ventilation openings. Ensure adequate airflow around the UPS.
- Do not install the UPS in direct sunlight, near heat sources, or in environments with excessive dust, humidity, or corrosive substances.
- The internal batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
- In case of fire, use a dry chemical fire extinguisher. Water can be dangerous.
Ihe ngwugwu
Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer.
- PowerWalker VFI 3000 AT UPS Unit
- Akwụkwọ ntuziaka (akwụkwọ a)
- USB nkwurịta okwu
- Igwe ntinye ike
- Software CD (if applicable)
Ngwaahịa gafereview
Ogwe ihu
Foto 1: N'ihu view of the PowerWalker VFI 3000 AT UPS. This image displays the main chassis, ventilation grilles, and the front control panel with its LCD screen and buttons.
Foto 2: Zuru ezu view of the UPS front panel. The LCD screen shows input/output voltage and load status. Below the screen are control buttons: ON, OFF, ENTER, and ESC, used for navigating menus and controlling the unit.
The front panel features an LCD display that provides real-time information about the UPS status, including input/output voltage, battery level, and load capacity. Control buttons allow for navigation through the display menus and basic operation of the unit.
Ogwe azụ
Foto 3: N'azụ view of the PowerWalker VFI 3000 AT UPS. This panel includes multiple Type F earthing contact outlets for connecting protected devices, cooling fans, a main power input, and communication ports (USB, RS-232, and an optional slot for network card).
The rear panel provides the necessary connections for input power, output to protected devices, and communication interfaces. It includes four Type F earthing contact outlets, a terminal output, USB and RS-232 communication ports, and slots for optional accessories like network cards.
Ntuziaka nhazi
1. Ntinye
- Debe UPS ahụ n'elu ebe dị larịị ma kwụsie ike.
- Ensure the environment is well-ventilated and free from excessive dust or moisture.
- Maintain at least 20 cm (8 inches) of clearance from the rear and sides of the UPS for proper airflow.
- Avoid placing the UPS near heat-emitting appliances.
2. Ijikọ na Ike
- Connect the provided power input cable to the UPS input receptacle on the rear panel.
- Plug the other end of the power input cable into a grounded wall outlet.
- Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery performance.
3. Ijikọ Ngwaọrụ
- Plug your critical devices (e.g., computers, servers, network equipment) into the Type F output receptacles on the rear panel of the UPS.
- Ensure that the total load connected to the UPS does not exceed its rated capacity (2700W for this model).
- For devices requiring terminal output, connect them according to electrical safety standards.
4. Mmalite mbụ
- After connecting the UPS to AC power and allowing initial charging, press and hold the ON button on the front panel for approximately 2 seconds.
- The UPS will perform a self-test, and the LCD display will illuminate, indicating operational status.
- The UPS is now providing protected power to the connected devices.
Na-arụ ọrụ UPS
Na-agbanye/ Gbanyụọ
- Ka ịgbanwuo: Pịa ma jide ON bọtịnụ maka 2 sekọnd.
- Ịgbanyụ: Pịa ma jide Gbanyụọ button for 2 seconds. The UPS will shut down, and power to connected devices will cease.
Ịghọta Ngosipụta LCD
The LCD display provides critical information about the UPS status. Use the Banye na ESC buttons to navigate through different display screens, which may include:
- Ntinye Voltage na Frequency
- Mmepụta Voltage na Frequency
- Ọkwa chaja batrị
- Ibu Ibu Percentage
- Operating Mode (Online, Battery, Bypass)
- Koodu Njehie (ọ bụrụ na ọ dị)
Ọrụ ndabere batrị
N'ihe omume nke ike ịtage ma ọ bụ vol dị mkpatage fluctuation, the UPS will automatically switch to battery power to provide continuous power to connected devices. An audible alarm may sound, and the LCD will indicate "Battery Mode." The duration of battery backup depends on the load connected and the battery charge level.
Ngwa nkwukọrịta
For advanced monitoring and management, install the provided communication software on a computer connected to the UPS via the USB or RS-232 port. This software allows for scheduled shutdowns, remote monitoring, and detailed event logging.
Nlekọta
Nlekọta batrị
- Ensure the UPS is connected to AC power at all times to keep the batteries fully charged.
- Perform a battery self-test periodically (e.g., once every 3 months) using the UPS front panel controls or communication software to verify battery health.
- Batteries have a limited lifespan. If the battery backup time significantly decreases, contact qualified service personnel for replacement.
Nhicha
- Disconnect the UPS from AC power and all connected devices before cleaning.
- Use a soft, dry cloth to wipe the exterior of the UPS.
- Do not use liquid or aerosol cleaners, as they may damage the unit.
- Periodically clean the ventilation grilles to prevent dust buildup, which can impede airflow and cause overheating.
Nchekwa
- If storing the UPS for an extended period, ensure the batteries are fully charged.
- Store the UPS in a cool, dry place.
- Recharge the batteries every 3 months during storage to prevent deep discharge and prolong battery life.
Nchọpụta nsogbu
Refer to the table below for common issues and their solutions. If the problem persists, contact technical support.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| UPS anaghị agba ọkụ. | No AC input power. Obere ụgwọ batrị. | Lelee njikọ eriri ọkụ eletrik na oghere mgbidi. Allow UPS to charge for several hours. |
| UPS beeps continuously in normal mode. | Ibu ibu ọnọdụ. Mmejọ nke ime. | Reduce the load by unplugging non-essential devices. Kpọtụrụ nkwado teknụzụ. |
| Short backup time. | Achajighị batrị zuru oke. Batteries reaching end of life. Ibu oke ibu. | Allow UPS to charge for 8+ hours. Contact service for battery replacement. Reduce connected load. |
| UPS is noisy. | Normal fan operation (especially under load). Ihe mgbochi ndị fan. | This is normal for online UPS units. Ensure proper ventilation. Check for and clear any obstructions around fans. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nlereanya | 10122182 |
| Ike | 3000 VA / 2700 W |
| Ntinye Voltage | 300 Volts (nominal) |
| Mmepụta Voltage | 300 Volts (nominal) |
| Ụdị batrị | Lead-Acid, AGM |
| Batrị gụnyere | Ee |
| Output Outlets | 4x Type F Earthing Contact, Terminal Output |
| Ụdị Ihe | Ụlọ elu |
| Akụkụ (L x W x H) | 41.6 x 19.6 x 34.2 cm |
| Ibu | 21 n'arọ |
| Ihe onwunwe | Plastic |
| Ampoge | 9 Amps |
Akwụkwọ ikike na nkwado
The PowerWalker VFI 3000 AT UPS is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official PowerWalker websaịtị.
For technical support, service inquiries, or to report any issues, please contact your local dealer or PowerWalker customer service. Have your model number (10122182) and purchase information ready when contacting support.
