1. Okwu mmalite
This manual provides instructions for the OttLite Entice LED Desk Lamp with Wireless Charger & USB. This lamp features OttLite's ClearSun LED technology, adjustable brightness and color temperatures, a foldable arm, and integrated wireless and USB charging capabilities. Please read this manual thoroughly before use and retain it for future reference.
Foto 1.1: OttLite Entice LED Desk Lamp gafereview. The image displays the lamp in its extended position, with a smartphone placed on the base for wireless charging. The lamp is white with a silver-colored light bar.
2. Ntuziaka nchekwa dị mkpa
To reduce the risk of fire, electric shock, or injury to persons, please observe the following:
- Ejila eriri ndọtị were were ọ gwụla ma enwere ike itinye plọg ahụ nke ọma.
- Agbanwela plọg.
- Kpupu lamp site na ebe a na-esi n'ọkụ eletrik tupu e hichaa ya.
- Ejila ọrụ lamp nso mmiri.
- Nke a lamp bụ naanị maka ime ụlọ.
- Anwala ịkwasa lamp. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime.
- Keep the wireless charging pad clear of metal objects, credit cards, or other items that could interfere with charging or cause overheating.
3. Ihe ngwugwu
Chọpụta na akụrụngwa niile dị na ngwugwu:
- OttLite Entice LED Desk Lamp (Model: CSDQA02W-SHPR)
- Igwe ọkụ ọkụ
4. Ntuziaka Nhazi
4.1 Nwepu
- Jiri nlezianya wepụ ihe niile dị na nkwakọ ngwaahịa.
- Remove any protective films or ties.
4.2 Ntinye
Debe lamp on a stable, flat surface. Ensure there is adequate space around the base for wireless charging and access to the USB port.
4.3 Njikọ ike
- Insert the power cable into the power input port located at the back of the lamp isi.
- Plug the other end of the power cable into a standard 120V AC wall outlet.
4.4 Ịgbanwe Lamp
Ndị lamp features a foldable arm and shade for precise light placement and compact storage. The height can be adjusted from 11 to 22 inches.
Foto 4.1: Lamp Features and Adjustments. This diagram shows the lamp's adjustable height (11" to 22"), 3 color modes, wireless charging pad, USB charging port, and touch-sensitive controls on the base.
5. Ntuziaka ọrụ
Ndị lamp is controlled via touch-sensitive buttons located on the base.
5.1 Gbanyụọ ma ọ bụ gbanyụọ
- Iji tụgharịa lamp ON or Gbanyụọ, metụ bọtịnụ ike () na isi.
5.2 Na-edozi ihie
- Site na lamp on, repeatedly touch the Brightness Up button () to increase brightness.
- Metụ aka ugboro ugboro Brightness Down button () to decrease brightness.
- There are 5 brightness levels available for each color temperature mode.
5.3 Ịgbanwe Okpomọkụ Agba
- Site na lamp on, touch the bọtịnụ ọnọdụ () to cycle through the three color temperature modes: Warm, Bright, and ClearSun Daylight.
5.4 Nchaji ikuku
Ndị lamp base includes a Qi-certified wireless charging pad.
- Place your Qi-enabled device (e.g., smartphone) face up on the wireless charging pad located on the lamp isi.
- Ensure the device is centered on the charging pad for optimal charging.
- A charging indicator on your device will confirm that charging has begun.
Foto 5.1: Wireless Charging in Use. A smartphone is shown placed on the lamp's base, indicating active wireless charging.
5.5 USB Nchaji
A 5V, 2.1A USB port is located on the back of the lamp base for charging additional devices.
- Connect your device's USB charging cable to the USB port on the lamp isi.
- Connect the other end of the cable to your device to begin charging.
Foto 5.2: USB Charging Port. A hand is shown connecting a USB cable to the USB port located on the rear of the lamp's base.
6. Nlekọta
6.1 Nhicha
- Gbaa mbọ hụ na lamp a na-ewepụ ya na isi iyi ike tupu ihicha.
- Hichapụ lamp jiri akwa dị nro, kpọrọ nkụ.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
6.2 Igwe ọkụ ọkụ
The LED light source in this lamp is designed for long-term use and is not replaceable. Do not attempt to replace the LEDs.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Lamp adịghị agbanye. | Enweghị njikọ ike. | Ensure the power cable is securely plugged into the lamp na mgbidi mgbidi. |
| Nchaji ikuku anaghị arụ ọrụ. | Device not Qi-enabled or not properly aligned. | Verify your device supports Qi wireless charging. Reposition the device on the charging pad to ensure proper alignment. Remove any thick cases or metal objects. |
| Ịchaji USB anaghị arụ ọrụ. | USB cable issue or device not compatible. | Try a different USB cable. Ensure the device is compatible with 5V, 2.1A USB charging. |
| Ìhè na-egbuke egbuke ma ọ bụ na-acha uhie uhie. | Okwu ọkọnọ ike. | Gbaa mbọ hụ na lamp is connected directly to a wall outlet, not an overloaded extension cord. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | CSDQA02W-SHPR |
| Ụdị | OttLite |
| Ụdị isi iyi ọkụ | LED (Teknụzụ ClearSun) |
| Wattage | 8 watt |
| Icha ọkụ | 424 Lumen |
| Okpomọkụ agba | 3 Modes (Warm, Bright, ClearSun Daylight) |
| Ndekọ ngosi agba (CRI) | 95+ |
| Usoro njikwa | Metụ aka |
| Mmepụta Nchaji Ikuku | Qi-enwetara ya |
| Nchaji USB | 5V, 2.1A |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Voltage | 120 volts |
| Nha Ngwaahịa (Agbatịkwuru) | 9"D x 7"W x 19"H |
| Ibu Ibu | 1.58 pound |
| Ihe onwunwe | Ọla, plastik |
| Ojiji ime ime/n'èzí | Ime ụlọ |
9. Akwụkwọ ikike na nkwado
9.1 Ozi akwụkwọ ikike
Specific warranty details for your OttLite Entice LED Desk Lamp are typically included with the product packaging or can be found on the official OttLite website. Please refer to these resources for information regarding warranty coverage and terms.
9.2 Nkwado ndị ahịa
For technical assistance, replacement parts, or further inquiries, please contact OttLite customer support. Contact information can usually be found on the OttLite websaịtị ma ọ bụ na nkwakọ ngwaahịa.
I nwekwara ike ịga leta ya OttLite Store on Amazon maka ozi ngwaahịa ọzọ na akụrụngwa nkwado.
