Akwụkwọ ntuziaka+

ELECROW RC070S

Ntuziaka Ntuziaka maka Nyocha Ihuenyo Aka nke ELECROW 7 Inch (Model RC070S)

1. Ngwaahịa gafereview

This manual provides detailed instructions for the setup, operation, and maintenance of your ELECROW 7 Inch Touchscreen Monitor, Model RC070S. Please read thoroughly before use.

Ụdị: RC070S

Akara: ELECROW

The ELECROW 7-inch IPS touchscreen offers a 1024x600 resolution, adjustable via software to 1920x1080. It features vivid colors, a 178° viewing angle, and a durable, scratch-resistant tempered glass touch panel. Designed for plug-and-play functionality, it connects via HDMI for video and USB for power and touch control, requiring no additional drivers. It is compatible with various devices including Raspberry Pi 5/4/3B+/3B/2B+, Banana Pi, Jetson Nano, PCs, laptops, and gaming consoles. The monitor supports 5-point capacitive touch on Windows 11/10/8/7 and single-touch on Raspberry Pi and Jetson Nano. Integrated dual speakers and a 3.5mm headphone jack provide immersive audio, with adjustable volume and backlight settings.

2. Ihe ngwugwu

  • 1 x 7 Inch IPS Monitor
  • 1 x USB to Micro USB Connector
  • 1 x HD to Micro HD Connector
  • 1 x USB ka Micro USB USB
  • 1 x HD to HD Cable
  • 4 x M2.5 kposara
  • 2 x M3 kposara
  • 2 x Ndị na-ekwu okwu
  • 2 x Pro guzoro
  • 4 x Small Copper Pillars

3. Nka na ụzụ nkọwa

NjirimaraNkọwapụta
Gosipụta nha ihuenyo7 sentimita asatọ
Ụdị panelIPS
Ụdị mmetụAka Ike nke Isi Iri
Mkpebi1024 x 600 Pixels (Software adjustable to 1920x1080)
Icha ọkụ260 cd/m²
Viewna n'akuku178° (H) / 178° (V)
Ọnụego ume ọhụrụ60Hz
ọdụ ụgbọ mmiri HDMI1
ọdụ ụgbọ mmiri USB1 (for power and touch)
Mmepụta ọdịyo3.5mm Audio Jack, Built-in Dual Speakers
Ntinye Voltage5 volts
Ike zuru oke (Kachasị)2.55W
Okpomọkụ na-arụ ọrụ-20°C ~ 60°C
Okpomọkụ nchekwa-30°C ~ 70°C
Akụkụ ngwaahịa1 x 6.5 x 4 sentimita asatọ
Ibu Ibu8.3 ounces
OS akwadoroWindows 11/10/8/7, Raspbian, Ubuntu, Kali, Retropie, Jetson Nano

4. Ntọala na nwụnye

4.1 General Assembly

To set up the monitor, first attach the included stands to the bottom of the display using the provided screws. Ensure the protective film is removed from the stands before assembly.

Image showing the assembly of the monitor stands with screws.
Figure 1: Attaching the stands to the monitor. The stands provide stability for desktop use.

4.2 Raspberry Pi Connection

For Raspberry Pi connections, use the provided HDMI cable for video and the USB cable for power and touch functionality. For Raspberry Pi 4 and 5, use the included Micro-HDMI to HDMI adapter. No drivers are required for basic functionality.

Ihe dị mkpa: For Raspberry Pi 4, if using a system image after 2021-10-30 (e.g., Bullseye), modify dtoverlay = vc4-kms-v3d ka dtoverlay = vc4-fkms-v3d n'ime config.txt file. For Buster, comment out dtoverlay = vc4-fkms-V3D by adding a '#' at the beginning of the line.

Image showing a Raspberry Pi connected to the monitor using short HDMI and USB cables.
Figure 2: Raspberry Pi connected to the monitor. The short cables minimize clutter and are ideal for integrated setups.

Video 1: Step-by-step guide on how to install the 7-inch screen with a Raspberry Pi, demonstrating cable connections and initial setup.

Video 2: Instructions on how to install the Raspberry Pi board with the screen, detailing the physical mounting and connections.

4.3 PC njikọ

Connect the monitor to your PC or laptop using the HDMI cable for video and the USB cable for power and touch. The monitor is driver-free for Windows 11/10/8/7. Adjust display settings on your PC for optimal resolution.

Image showing the monitor connected to a laptop, extending the display.
Figure 3: Monitor connected to a PC or laptop, demonstrating its use as an extended display.

5. Na-arụ ọrụ nlekota oru

5.1 Mmetụ Aka

The monitor features a 5-point capacitive touchscreen for multi-touch gestures on Windows and single-touch on Raspberry Pi and Jetson Nano. Ensure the USB cable is connected to enable touch input.

Image showing a hand interacting with the 7-inch capacitive touchscreen, demonstrating multi-touch capability.
Figure 4: User interacting with the 5-point capacitive touch screen.

5.2 Ngosipụta Ngosipụta (OSD) NchNhr

The monitor includes tactile buttons on the side for navigating the OSD menu. These buttons allow adjustment of various display settings:

  • Foto: Adjust backlight, brightness, contrast, and sharpness.
  • Agba: Modify panel uniformity, gamma, temperature, and color effects.
  • Ọganihu: Set aspect ratio.
  • Audio: Control volume and mute.
Image showing the back of the monitor with labeled buttons for menu navigation and ports.
Ọgụgụ 5: N'azụ view of the monitor highlighting the OSD menu buttons and various ports.

5.3 Akụkụ ọdịyo

The monitor is equipped with built-in dual speakers and a 3.5mm headphone jack for audio output. Digital audio output is also supported via HDMI.

Image showing the monitor with built-in dual speakers and a Raspberry Pi connected.
Figure 6: Monitor with integrated dual speakers for audio output.

6. Nchọpụta nsogbu

  • Monitor not powering on: Ensure the power cable (USB-A to C) is properly plugged into both the Raspberry Pi/PC and the monitor.
  • Image is reversed: The monitor does not support image flip.
  • No touch functionality: Verify the USB-A to C cable is securely connected between the host device and the monitor.
  • No signal on display: Ensure the HDMI cable is properly connected between the host device and the monitor. If using a mini HDMI port, ensure the correct adapter is used.
  • Speakers at high volume cause issues: When speakers are at 80% or more volume, connect the power port (not touch port) to provide full power.

7. Ihe ndetu dị mkpa

  • The Raspberry Pi cannot be powered by powering the screen.
  • Always connect the power interface when powering the screen. Supplying power through the touch interface may lead to insensitive or unusable touch functionality.

8. Akwụkwọ ikike na nkwado

ELECROW products offer a one-year warranty. For quality-related issues, you may return any undamaged product within 12 months for a refund or replacement. Shipping costs and charges are not included.

For support or inquiries, please contact ELECROW customer service:

Akwụkwọ ndị emetụtara - RC070S

Tupuview ELECROW 5 Inch HD Display User Manual (DIS05490T) - Setup and Specifications
Comprehensive user manual for the ELECROW 5 Inch HD Display (DIS05490T). Learn about product specifications, dimensions, connections, and package contents for easy setup with devices like Raspberry Pi.
Tupuview Elecrow Mini PC Case Assembly Guide for Raspberry Pi 5 and Jetson Orin Nano
Comprehensive assembly guide for Elecrow's mini PC cases, detailing the installation process for Raspberry Pi 5 and NVIDIA Jetson Orin Nano, including OLED screen and metal switch setup.
Tupuview Ntuziaka Mmalite Ngwa Ngwa CrowPi Nile-n'otu
Ntuziaka a na-enye ntuziaka maka ịtọlite ​​na iji Elecrow CrowPi All-in-One Kit, bọọdụ mmepe Raspberry Pi nke e mere maka agụmakwụkwọ na ọrụ STEM. Ọ na-ekpuchi ntinye tupu e tinye ya, ntọala ngwanrọ, nchikọta ngwaike, na mmalite mmalite.
Tupuview Ntuziaka Onye Ọrụ Ngosipụta Mmetụ Aka nke ELECROW ESP32 nke SPI Capacitive 3.5-inch
Akwụkwọ ntuziaka zuru oke maka ELECROW ESP32 Terminal nwere ngosipụta aka SPI capacitive nke dị sentimita 3.5. Gụnyere nkọwapụta, nkọwa ngwaike, eserese njikọ, na akụrụngwa mgbasawanye maka ndị mmepe na ndị na-enwe mmasị na ya.
Tupuview Akwụkwọ ntuziaka onye ọrụ Crowpi3 - Elecrow
Akwụkwọ ntuziaka onye ọrụ maka Crowpi3, nhazi nkọwa, atụmatụ mmụta AI na ntuziaka ojiji. Gụnyere ozi na akụrụngwa akụrụngwa yana njikọta ngwanrọ.
Tupuview ELECROW ESP32 HMI Display User Manual - Specifications & Guide
Comprehensive user manual for ELECROW ESP32 HMI Displays, covering package contents, safety instructions, interface pinouts, and detailed technical specifications for various screen sizes (2.4" to 7.0").