SIIG 4K DisplayPort 2-Port KVM Switch User Manual

1. Okwu mmalite

The SIIG 4K DisplayPort 2-Port KVM Switch (Model: CE-DP0F11-S1) allows you to control two DisplayPort 1.2 computers using a single set of keyboard, mouse, and monitor. This device supports 4K video resolution at 60Hz, USB 3.0 peripherals, and audio/microphone connections, enhancing productivity and workspace organization.

Image: The KVM switch facilitates efficient switching between multiple 4K UHD devices using front panel buttons or keyboard hotkeys.

2. Ngwaahịa gafereview

2.1 Ogwe ihu

The front panel provides convenient access for switching between connected computers and connecting USB peripherals.

• PC Switch Buttons (PC1, PC2): Press these buttons to manually switch control between Computer 1 and Computer 2.
• ọdụ ụgbọ mmiri USB 3.0 (x2): Connect USB 3.0 devices such as flash drives, external hard drives, or other high-speed peripherals.

2.2 Ogwe azụ

The rear panel houses all the primary connection ports for your computers, monitor, keyboard, mouse, and audio devices.

• DC 12V Jack Jack ike: Jikọọ nkwụnye ọkụ gụnyere ebe a.
• Igwe ọkụ ọkụ: Na-egosi ọnọdụ ike nke mgbanwe KVM.
• Micro USB Port (FW): Eji maka mmelite firmware.
• ọdụ ụgbọ mmiri USB 3.0 (x2): Connect additional USB 3.0 peripherals.
• Mwepụ Ọdịyo (3.5mm): Connect speakers or headphones.
• Mic In (3.5mm): Jikọọ igwe okwu.
• PC1/PC2 DisplayPort In (x2): Connect DisplayPort cables from Computer 1 and Computer 2.
• PC1/PC2 USB 3.0 / Mic / Audio (x2): Connect USB 3.0 cables and audio/mic cables from Computer 1 and Computer 2.
• NgosipụtaPort: Connect your monitor's DisplayPort cable here.
• Mgbanwe DIP: Used for signal level enhancement (EQ settings).
• Keyboard/Mouse Port (USB 2.0): Dedicated USB ports for connecting your keyboard and mouse.

Image: Detailed diagram of the KVM switch's front and rear panel connections.

3. Nhazi ntuziaka

Follow these steps to set up your SIIG 4K DisplayPort 2-Port KVM Switch:

1. Gbanyụọ ngwaọrụ: Ensure both computers and your monitor are powered off before making any connections.
2. Jikọọ Nyochaa: Connect your DisplayPort monitor to the Mmepụta DisplayPort port on the rear panel of the KVM switch.
3. Jikọọ ahụigodo na òké: Connect your USB keyboard and mouse to the dedicated Keyboard/Mouse Port (USB 2.0) on the rear panel.
4. Connect Computers (PC1 & PC2):
   • Connect a DisplayPort cable from Computer 1 to the PC1 DisplayPort In port. Repeat for Computer 2 to PC2 DisplayPort In.
   • Connect a USB 3.0 cable from Computer 1 to the PC1 USB 3.0 / Mic / Audio port. Repeat for Computer 2 to PC2 USB 3.0 / Mic / Audio.
5. Jikọọ ngwaọrụ ọdịyo: If using external speakers/headphones and a microphone, connect them to the Apụọ ọdịyo na Mic Na ọdụ ụgbọ mmiri na azụ panel.
6. Jikọọ eriri USB: Connect any additional USB 3.0 peripherals (e.g., printer, flash drive) to the USB 3.0 ọdụ ụgbọ mmiri on either the front or rear panel.
7. Ike Na: Jikọọ nkwụnye ọkụ gụnyere na DC 12V Jack Jack and then plug it into a power outlet. The Power LED will illuminate.
8. Power On Computers & Monitor: Power on your computers and monitor. The KVM switch should automatically detect the active computer.

Image: The KVM switch allows connection of various devices including keyboard, mouse, USB peripherals, headphones, microphone, and a display.

4. Ntuziaka ọrụ

4.1 Switching Between Computers

You can switch between connected computers using two methods:

• Front Panel Push Buttons: Pịa PC1 or PC2 button on the front panel to switch to the corresponding computer. The LED indicator will show which computer is active.
• Igwe ọkụ ahụigodo: Use the following hotkey sequence on your connected keyboard:
  [Scroll Lock] + [Scroll Lock] + [Number] + [Enter]
  Dochie [nọmba] with '1' for PC1 or '2' for PC2. For example, to switch to PC1, press Scroll Lock twice, then '1', then Enter.

4.2 Auto-Scan Feature

The KVM switch supports an auto-scan feature for quick browsing and system monitoring.

• Activate Auto-Scan: Press the hotkey sequence:
  [Pịgharịa Mkpọchi] + [Mkpọchi] + [S]
  This will initiate an automatic scan, cycling through the connected computers.
• Exit Auto-Scan: Press any key to stop the auto-scan function.

4.3 Signal Level Enhancement (EQ)

The DIP switch on the rear panel allows for signal level enhancement (EQ) to optimize DisplayPort signal quality, especially with longer cables or specific display setups. Refer to the product's full manual for detailed settings and recommendations for the DIP switch positions.

5. Atụmatụ igodo

• High-Performance Workstation: Control two DisplayPort 1.2 computers with a single keyboard, mouse, and monitor.
• Ogo vidiyo kachasị elu: Supports resolutions up to 3840x2160 @60Hz YUV 4:4:4 8-bit, 3D, and Deep Color.
• MST Passthrough: Allows for multiple displays when supported by the connected graphics card and monitor.
• Bandwit dị elu: Offers a true 21.6Gbps video bandwidth.
• Advanced Audio Support: Supports 7.1ch surround sound or stereo audio, including PCM, DTS-HD, Dolby Digital, and Dolby TrueHD.
• Ọtụtụ ọdụ ụgbọ mmiri USB: Features 4x USB 3.0 Type-A ports for various USB peripherals (flash drives, printers) and 2x USB 1.1 ports for keyboard and mouse.
• Hotkey & Push Button Control: Easy switching between computers via front panel buttons or USB keyboard hotkeys.
• Nwelite ngwa ngwa: Includes a Micro USB port for future firmware updates.
• Nrụpụta siri ike: Durable metal housing for enhanced longevity and ESD protection.
• Ndabere na TAA: Meets Trade Agreements Act requirements.

Image: The KVM switch supports a true 21.6Gbps video bandwidth and 7.1 channel surround sound or stereo audio.

Image: The KVM switch features a sturdy metal construction.

Image: The KVM switch is TAA Compliant.

6. Nlekọta

• Nhicha: Use a soft, dry cloth to clean the device. Avoid liquid cleaners or solvents.
• Mmelite femụwe: Periodically check the SIIG website for available firmware updates to ensure optimal performance and compatibility. Firmware updates can be applied via the Micro USB port on the rear panel.
• Njikwa USB: Hụ na e jikọtara waya niile nke ọma ma hazie ha nke ọma iji gbochie nkwụsịtụ ma ọ bụ mmebi mberede.

7. Nchọpụta nsogbu

Ọ bụrụ na ị zutere nsogbu na mgba ọkụ KVM gị, rụtụ aka na usoro nchọpụta nsogbu ndị a:

• Enweghị Ngosipụta:
  • Ensure all DisplayPort cables are securely connected between the computers, KVM, and monitor.
  • Verify the monitor is powered on and set to the correct input source.
  • Try restarting the KVM switch and computers.
  • Check the DIP switch settings for signal level enhancement.
• Ahụigodo/Òké anaghị aza:
  • Ensure the keyboard and mouse are connected to the dedicated Keyboard/Mouse Port n'azụ panel.
  • Try connecting the keyboard/mouse directly to the computer to confirm they are functional.
  • Some advanced gaming keyboards/mice may require direct connection to a computer or may not fully support KVM hotkeys. Use the front panel buttons for switching if hotkeys are problematic.
• USB Peripherals Not Detected:
  • Ensure the USB 3.0 cables from the computers are connected to the KVM's PC1/PC2 USB 3.0 / Mic / Audio ọdụ ụgbọ mmiri.
  • Try connecting the peripheral to a different USB port on the KVM or directly to the computer.
• No Audio/Microphone:
  • Verify audio cables are correctly connected to the Apụọ ọdịyo na Mic Na ports on the KVM and to your speakers/headphones/microphone.
  • Check audio settings on your operating system to ensure the correct output/input device is selected.

8. Nkọwapụta

9. Akwụkwọ ikike & Nkwado

9.1 Ozi akwụkwọ ikike

This SIIG KVM Switch is backed by a 3-afọ akwụkwọ ikike. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.

9.2 Technical Support & Firmware Upgrades

SIIG provides continuous service for firmware upgrades to ensure your product performs at its best for an extended period. For technical assistance, updated drivers, or the latest firmware, please visit the official SIIG websaịtị ma ọ bụ kpọtụrụ nkwado ndị ahịa ha.