1. Okwu mmalite
Thank you for choosing the ASD 2x2 LED Flat Panel Light Standard Series. This manual provides essential information for the safe installation, operation, and maintenance of your new LED panel light. Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: ASD 2x2 LED Flat Panel Light Standard Series, showing the product in its packaging.
2. Ozi nchekwa
To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
- Disconnect power at the fuse or circuit breaker before installation or servicing.
- Gbaa mbọ hụ na ọkọnọ voltage ziri ezi site n'iji ya tụnyere ozi labelụ luminaire.
- Do not install in areas where the operating temperature exceeds the fixture's rated ambient temperature.
- Ngwa a dabara adaba maka damp locations. Do not use in direct contact with water.
- Do not handle energized fixture with wet hands.
3. Ngwaahịa gafereview na nkọwapụta
The ASD 2x2 LED Flat Panel Light is designed for efficient and uniform illumination in commercial and indoor settings. It features a durable construction and advanced LED technology.
Image 3.1: Detailed product specifications including wattage, voltage, lumens, and color temperature.
3.1. Nka na ụzụ nkọwa
| Nkọwapụta | Uru |
|---|---|
| Wattage | 40W |
| Voltage | 120-277V |
| Mmepụta Lumen | 4230 Lumen |
| Okpomọkụ agba | 4000K (Ọcha na-egbuke egbuke) |
| Enwere ike ibelata | 0-10V |
| Angle Beam | 120° |
| Asambodo | cULus Listed, DLC Certified |
| Ogo ọnọdụ | Damp Ebe |
3.2. Akụkụ
Image 3.2: Diagram showing the physical dimensions of the 2x2 LED panel light.
The panel measures approximately 23 3/4 inches by 23 3/4 inches, with a thickness of 1 3/4 inches.
3.3. Atụmatụ
Image 3.3: Visual representation of key features including diffuser and frame material.
- Non-Yellowing PC Diffuser: Provides uniform light distribution with no glare.
- Anti-Corrosion Aluminum Frame: Designed for fast heat dissipation and durability.
- 0-10V Dimmable Driver: Includes circuit overload and low-voltage nchedo.
3.4. Available Sizes and Finish
Image 3.4: Illustration of various available panel sizes and the standard white finish.
This product series is available in multiple sizes, including 1x4Ft, 2x2Ft (this model), and 2x4Ft. All models feature a clean white finish.
4. Nwụnye
Before beginning installation, ensure power is disconnected at the circuit breaker. Follow the instructions carefully for your specific mounting type.
4.1. Recessed Ugwu nwụnye
Image 4.1: Step-by-step guide for installing the LED panel light into a recessed ceiling grid.
- Nzọụkwụ 1: Choose the ceiling panel where you want to install the product and remove it. For convenience, move adjacent ceiling tiles. Fix the LED panel into the ceiling: raise up the product above the grid, then place it on T-bars. Bend points for all four tabs.
- Nzọụkwụ 2: Chekwaa panel ahụ na grid dị ka egosiri na foto a. Gbaa mbọ hụ na etinyere taabụ ahụ nke ọma na grid. Jikọọ wires n'ime igbe njikọ nke panel dabara agba N, L, na G site na iji mkpụrụ.
- Nzọụkwụ 3: Weghachite taịlị ndị dị n'akụkụ n'ebe ha nọ. Gbanwuo ike isi. Emechara nwụnye.
4.2. Ngwunye elu ugwu
For surface mount installation, a separate surface mount kit (ASD-FELP22-L, ASD-FELP24-L) is required and sold separately.
Image 4.2: Step-by-step guide for surface mounting the LED panel light using an external frame kit.
- Nzọụkwụ 1: Tinye akụkụ nke etiti ahụ n'elu elu ọ bụla kwụ ọtọ. Jikọọ iberibe atọ ọnụ na kposara (gụnyere). Jikọọ akụkụ 3 ndị a nke etiti ahụ na elu ụlọ site na iji kposara anọ.
- Nzọụkwụ 2: Connect the wires into the junction box of the panel matching colors N, L, and G using nuts. Insert the panel into the frame formed by three connected pieces.
- Nzọụkwụ 3: Tinye mpempe nke anọ ma jiri kposara chekwaa ya. Gbanwuo ike isi. Nwụnye ezuola.
5. Ntuziaka ọrụ
Once properly installed, the ASD LED Flat Panel Light operates like any standard lighting fixture. Ensure the power supply is connected and the wall switch is in the 'ON' position.
5.1. Ọrụ Mbelata
This fixture supports 0-10V dimming. To utilize the dimming feature, connect the fixture to a compatible 0-10V dimmer switch (sold separately). Follow the dimmer manufacturer's instructions for wiring and operation. The light output will adjust smoothly from 100% down to 10% or lower, depending on the dimmer's capabilities.
6. Nlekọta
The ASD LED Flat Panel Light requires minimal maintenance. Regular cleaning will help maintain its appearance and light output.
- Nhicha: Hụ na agbanyụrụ ọkụ tupu ị sachaa ya. Jiri ihe dị nro, kpọrọ nkụ, ma ọ bụ nke dị ntakịrị ọkụ.amp cloth to wipe the surface of the panel. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or diffuser.
- Enweghị akụkụ ndị ọrụ-ọrụ: The LED components and driver are integrated and not designed for user servicing. Do not attempt to open or repair the fixture.
7. Nchọpụta nsogbu
If you experience issues with your LED panel light, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | Enweghị ike; waya na-adịghị ike; mgba ọkụ ma ọ bụ ihe mgbawa sekit nwere nsogbu. | Check power supply at the circuit breaker. Verify all wire connections are secure. Test the switch. |
| Ọkụ na-enwu ma ọ bụ na-ebelata n'enweghị usoro. | Incompatible dimmer; loose dimming wires; voltagna mgbanwe. | Ensure a 0-10V compatible dimmer is used. Check dimming wire connections. Consult an electrician for voltage okwu. |
| Mpụta ọkụ dị ala karịa ka a tụrụ anya ya. | Dimmer set too low; dust accumulation on diffuser. | Adjust dimmer to maximum setting. Clean the diffuser surface. |
8. Ngwa
The ASD 2x2 LED Flat Panel Light is versatile and suitable for a wide range of indoor commercial and residential applications, providing bright and even illumination.
Image 8.1: Various indoor settings where the LED panel light can be effectively used, such as offices, hallways, and common areas.
9. Akwụkwọ ikike na nkwado
ASD is committed to providing high-quality products and excellent customer service.
Image 9.1: Information regarding product certifications, warranty period, and company origin.
- Akwụkwọ ikike: ASD na-enye ihe 5-afọ akwụkwọ ikike on this product, guaranteeing top quality and safety.
- Asambodo: This product is UL and DLC Standard certified, ensuring compliance with industry safety and performance standards.
- Rebates: Top US certifications may allow participation in rebates. Please check the rebate programs available in your state.
- Ndị ọrụ nlekọta ndị ahịa: As an American company, ASD offers exceptional customer service. For support, please visit the ASD Lighting Corporation store on Amazon or contact their customer service directly.
Akwụkwọ ndị emetụtara - ASD-ELP02-2204040-STD
 |
ASD LED Linear High Bay nwere Q-Base: Nkọwapụta na Nduzi Nwụnye Nduzi zuru oke maka ASD's LED Linear High Bay nwere Q-Base, nkọwapụta ngwaahịa, atụmatụ, ntuziaka nrụnye, na ozi gbasara ịtụ ihe. Na-ekpuchi arụmọrụ ike, ike a họọrọ na okpomọkụ agba, nhọrọ ihe mmetụta mmegharị, na nkwado batrị. |
 |
ASD LED Trimless Downlight - Nkọwapụta Ngwaahịa, Ntinye, na Nduzi Nduzi Nduzi zuru oke maka ASD LED Trimless Downlights, nke gụnyere atụmatụ ngwaahịa, nkọwapụta zuru ezu, ntuziaka ntinye, na ozi gbasara ịtụ ihe. Atụmatụ gụnyere CCT nwere ike ịhọrọ agba, ọkwa CRI dị elu, IC na Wet Location, na ogologo ndụ. |
 |
Ntuziaka na nkọwapụta nke nrụnye efere ASD ọhụrụ maka ịwụnye n'elu ụlọ Nduzi zuru oke maka ASD New Construction Flat Mounting Plate, nkọwapụta nhazi ya, ojiji ya, nkọwapụta ya, ihe dị na ngwugwu ya, na usoro ntinye maka ọkụ LED. Gụnyere akụkọ ngwaahịa na ozi gbasara ịtụ ihe. |
 |
ASD LED Troffer Light - Ọkụ Azụmaahịa Dị Elu Chọpụta ASD LED Troffer Light, ihe ngwọta ọkụ dị iche iche ma na-arụ ọrụ nke ọma maka ebe azụmaahịa na ụlọ ọrụ mmepụta ihe. Site na okpomọkụ na ike agba a họọrọ, nkwado batrị arụnyere n'ime ya, yana imewe siri ike, ọkụ troffer a na-enye arụmọrụ ka mma na ogologo oge. Mụta maka nkọwapụta teknụzụ ya, ntuziaka nrụnye, na ngosipụta ngwaahịa. |
 |
Ngwa ASD LED Downlight Retrofit: A na-ahọrọ agba, a na-ebelata ya, ọkụ dị irè maka ike. Chọpụta ASD LED Downlight Retrofit Kit, nke nwere imewe ochie, nhọrọ agba 5CCT a pụrụ ịhọrọ, obere ntụpọ, na ntinye dị mfe. Ọ dị mma maka ebe mmiri dị, yana ogologo ndụ awa 50,000 na asambodo UL. Chọpụta nkọwapụta na ozi ịtụ ihe. |
 |
ASD LED Mgbidi Sconce | Nhazi nke oge a, Agba a na-ahọrọ, ọkụ a na-agbanwe agbanwe Chọpụta ASD LED Wall Sconce (usoro ASD-LWS-11-D15CC) maka ọkụ ọgbara ọhụrụ na nke na-arụ ọrụ nke ọma. Nwere CCT a na-ahọrọ agba, TRIAC dimming, ndụ awa 50,000, asambodo ETL & Energy Star. |