Okwu mmalite
With the dual monitor stand from DIGITUS® you can conveniently position two monitors of sizes 15" - 32" at your desk. The quick release feature also makes it easier to install the monitors. The VESA mount is simply pushed into the corresponding mount and fixed with a screw. Easily align the monitors according to your needs and can pan, tilt or rotate the monitors themselves, e.g. for portrait monitors. You can also adjust a height adjustment of up to 40 cm. In addition, the cables of the monitors can be neatly laid through the included cable routes. Do something good for yourself and your health by adjusting the monitor optimally to your body and sitting position.
Ozi nchekwa
Biko gụọ ntuziaka niile nke ọma tupu mgbakọ na iji. Debe akwụkwọ ntuziaka a maka ntụnye aka n'ọdịnihu.
- Gbaa mbọ hụ na akụrụngwa niile dị na emebighị ya tupu mgbakọ. Ejila ma ọ bụrụ na akụkụ ọ bụla na-efu ma ọ bụ nwere nkwarụ.
- Do not exceed the maximum weight capacity of 2 x 8 kg (17.6 lbs) per monitor arm.
- Ensure the desk surface is stable and capable of supporting the combined weight of the stand and monitors.
- Always use two people for lifting and positioning heavy monitors to prevent injury.
- Tighten all screws firmly, but do not overtighten to avoid stripping threads.
- Debe ụmụaka na anụ ụlọ n'oge mgbakọ.
Kedu ihe dị na Igbe ahụ
- Universal dual monitor stand
- Mounting material (screws, washers, tools)
- Ntuziaka nwụnye (akwụkwọ ntuziaka a)
Foto: Ofeview of the DIGITUS Dual Monitor Stand components, including the base, central pole, monitor arms, and VESA plates.
Ntọala na nwụnye
Follow these steps to assemble and install your DIGITUS Dual Monitor Stand.
- Kpọkọta ntọala: Attach the central pole to the heavy-duty base using the provided screws. Ensure it is securely fastened to provide a stable foundation for your monitors.
- Tinye Ogwe Aka Nlekọta: Slide the monitor arms onto the central pole. Adjust their height to your desired position and secure them with the locking mechanism.
- Install VESA Plates: Attach the VESA mounting plates to the back of your monitors. The stand supports VESA patterns 75x75mm and 100x100mm. Use the appropriate screws for your monitor.
Foto: N'azụ view of two monitors mounted on the stand, illustrating the VESA attachment points and cable routing.
- Ihe nlekota ugwu: Carefully slide the monitors (with VESA plates attached) onto the monitor arms' quick-release slots. Ensure they click into place and are secured with the safety screws.
- Njikwa USB: Utilize the integrated cable clips or channels along the arms and pole to route your monitor cables neatly. This helps maintain a tidy workspace.
Foto: N'ihu view of two monitors securely mounted on the DIGITUS stand, demonstrating a clean setup.
Ịrụ ọrụ na mmezi
The DIGITUS Dual Monitor Stand offers flexible adjustments for optimal viewna -akasi obi.
- Ndozi elu: tọpụ clamp on the central pole to slide the monitor arms up or down. Retighten the clamp firmly once the desired height is achieved.
- Ndozi Tilt: Each monitor can be tilted up to 45 degrees (both up and down) to reduce glare and optimize viewing angles. Loosen the tilt knob behind the VESA plate, adjust, and retighten.
- Ndozi Swivel: The monitor arms can swivel horizontally to position your screens as needed.
- Mgbanwe (Foto/Okirikiri Ala): Monitors can be rotated 360 degrees at the VESA plate, allowing for easy switching between landscape and portrait orientations.
- Njikwa USB: Use the integrated cable clips to route power and video cables along the arms and down the central pole for a clean and organized workspace.
Nlekọta
Regular maintenance ensures the longevity and optimal performance of your monitor stand.
- Nhicha: Jiri nwayọ hichaa ihe nkwụnye ahụ, damp ákwà. Zere ihe nhicha ma ọ bụ ihe mgbaze nke nwere ike imebi ihe ahụ.
- Lelee njikọ: Na-elele skru na njikọ niile mgbe niile iji hụ na ha siri ike ma sie ike. Mee ka ọ sie ike ma ọ dị mkpa.
- mmanu mmanu: No lubrication is typically required for this type of stand. If any joints become stiff, consult professional advice.
Nchọpụta nsogbu
If you encounter issues with your DIGITUS Dual Monitor Stand, refer to the following common problems and solutions.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Nkwụsi ike na-ama jijiji ma ọ bụ ejighị n'aka. | Screws not tightened; uneven desk surface; monitors too heavy. | Ensure all base and arm screws are fully tightened. Place the stand on a flat, stable surface. Verify monitor weight is within limits (max 8 kg per arm). |
| Monitors are not level. | Uneven VESA plate attachment; arm height not perfectly aligned. | Adjust the height of individual monitor arms slightly. Ensure VESA plates are mounted straight on the monitors. |
| Difficulty tilting monitors. | Tilt knob too tight or too loose. | Loosen the tilt knob slightly to adjust, then retighten to secure the desired angle. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | Digitus |
| Nọmba nlereanya | DA-90401 |
| Usoro | DA-90401 |
| Ibu Ibu | 8.6 pound |
| Akụkụ ngwaahịa (LxWxH) | 15 x 32.01 x 6.69 sentimita asatọ |
| Ụdị nkwụnye | Ugwu okpokoro |
| Ụdị mmegharị | Tilt, Swivel, Rotate |
| Maximum Compatible Monitor Size | 32 sentimita asatọ |
| Minimum Compatible Monitor Size | 15 - 32 sentimita asatọ |
| Oke Tilt Angle | 45 ogo |
| Ihe onwunwe | Alloy Steel |
| Ndakọrịta VESA | 75 x 75mm, 100 x 100mm |
| Oke Ibu Ibu | 2 x 8 kg (17.6 lbs) |
Akwụkwọ ikike na nkwado
This product comes with a 1-year EU spare part availability duration, indicating support for replacement parts within this period.
For further assistance, technical support, or warranty claims, please contact DIGITUS customer service through their official website or the retailer where the product was purchased. Please have your model number (DA-90401) and purchase information ready.
Maka ozi ndị ọzọ, gaa na: www.digitus.info
