Bryton Rider 320 GPS Cyclocomputer User Manual

1. Okwu mmalite

The Bryton Rider 320 is a high-performance GPS cyclocomputer designed for cyclists seeking comprehensive ride data. It features a clear 2.3-inch LCD display, long battery life, and support for various sensors to track speed, cadence, and heart rate. This manual provides essential information for setting up, operating, and maintaining your device.

Image: Bryton Rider 320 GPS Cyclocomputer device.

2. Kedu ihe dị na Igbe ahụ

Upon opening your Bryton Rider 320 package, verify that all components are present:

• Bryton Rider 320 GPS Cyclocomputer
• USB Cable (Micro USB)
• Sensọ Ọdị Obi
• Ugwu Handlebar
• Akwụkwọ ntuziaka (akwụkwọ a)

Note: The specific contents may vary slightly depending on the purchased bundle (e.g., "T" bundle includes sensors).

3. Nhazi

3.1 Nchaji ngwaọrụ

Before first use, fully charge your Rider 320. Connect the provided Micro USB cable to the device's charging port and plug the other end into a USB power adapter or computer. The device will indicate charging status. A full charge provides approximately 35 hours of battery life.

3.2 Ịtinye ngwaọrụ

Attach the handlebar mount to your bicycle's handlebars or stem using the provided O-rings or zip ties. Ensure the mount is secure and positioned for optimal viewing. Align the Rider 320 with the mount and twist it clockwise until it locks into place.

Njikọ Sensọ 3.3

The Rider 320 supports Bluetooth and ANT+ sensors. To pair a sensor (e.g., heart rate, cadence, speed):

1. Power on your Rider 320.
2. Gaa na Ntọala menu.
3. Họrọ Ihe mmetụta Ọzọkwa Tinye ihe mmetụta.
4. Activate the sensor (e.g., wear the heart rate strap, spin the crank for cadence).
5. The Rider 320 will scan for available sensors. Select your sensor from the list to pair it.
6. Kwado njikọ ahụ.

Note: Ensure sensors are within range and have working batteries.

3.4 Nhazi izizi

Upon first power-on or after a factory reset, you will be prompted to set basic preferences:

• Asụsụ: Họrọ asụsụ ọkacha mmasị gị.
• Nkeji: Choose between Metric (km/h, km) or Imperial (mph, miles).
• Mpaghara Oge: Tọọ mpaghara oge mpaghara gị.
• Onye ọrụ Profile: Enter basic information like age, weight, and height for accurate calorie and training calculations.

3.5 Bryton Active App Connection

The Bryton Active app (available for iOS and Android) enhances your Rider 320 experience. Download the app and create an account. To connect your device:

1. Kwado Bluetooth na ekwentị gị.
2. Open the Bryton Active app and navigate to the device pairing section.
3. On your Rider 320, go to Ntọala > Bluetooth > Jikọọ na App.
4. Soro ntuziaka ndị dị na ihuenyo dị na ngwa ahụ iji mezue usoro njikọta ahụ.

The app allows for display customization, firmware updates, and automatic ride data synchronization.

Image: Bryton Rider 320 display showing various data fields.

4. Ijikwa ngwaọrụ

4.1 Gbanyụọ ma ọ bụ gbanyụọ

• Ike Na: Press and hold the power button (usually on the side or bottom) until the Bryton logo appears.
• Gbanyụọ: Pịa ma jide bọtịnụ ike ahụ ruo mgbe oku gbanyụọ pụtara, wee kwado.

4.2 Nsoro ụzọ

The Rider 320 typically uses physical buttons for navigation. Refer to the device's button layout for specific functions:

• Bọtịnụ elu/ala: Navigate through menus or change data pages during a ride.
• OK/ENTER button: Confirm selections or start/stop recording.
• BACK/LAP button: Go back in menus or mark a lap during a ride.

4.3 Starting a Ride

1. Ensure the device has acquired a GPS signal (indicated by a solid GPS icon).
2. Pịa OK/Banye button to start recording your ride.
3. During the ride, you can switch between data pages using the UP/DOWN buttons.
4. Ka ịkwụsịtụ, pịa OK/Banye button. To resume, press it again.
5. To end and save the ride, press and hold the OK/Banye button, then confirm saving.

4.4 Nhazi Ngosipụta

The Rider 320 allows extensive customization of its data display pages. This can be done directly on the device or more conveniently through the Bryton Active app. You can select which data fields (e.g., speed, distance, heart rate, cadence, power, altitude) appear on each page and the number of fields per page.

Ọrụ GPS 4.5

The integrated GPS sensor provides accurate tracking of your location, speed, distance, and altitude. For best GPS performance, ensure the device has a clear view of the sky when starting a ride.

4.6 Mmekọrịta data

After completing a ride, you can synchronize your data to the Bryton Active app via Bluetooth. Once synced to the app, your ride data can be automatically uploaded to third-party platforms like Strava, TrainingPeaks, or Komoot, if configured in the app settings.

5. Nlekọta

5.1 Nhicha

Jiri nwayọ na-ehicha ngwaọrụ ahụ mgbe niile, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the screen or casing. Ensure the USB port cover is securely closed to maintain its IP54 water resistance rating.

5.2 Nlekọta batrị

Iji bulie ogologo ndụ batrị:

• Avoid extreme temperatures during charging and storage.
• Ekwela ka ngwaọrụ ahụ gbapụ kpamkpam ruo ogologo oge.
• For long-term storage, charge the device to approximately 50-70%.

5.3 Mmelite firmware

Bryton periodically releases firmware updates to improve performance, add features, and fix bugs. It is recommended to keep your device's firmware up to date. Updates can typically be performed via the Bryton Active app or by connecting the device to a computer and using Bryton's update tool.

6. Nchọpụta nsogbu

6.1 Okwu mgbaàmà GPS

• Enweghị akara: Hụ na ị nọ n'èzí n'enweghị nsogbu view of the sky. Avoid tall buildings or dense tree cover.
• Slow Acquisition: Allow a few minutes for the device to acquire a signal, especially if it's been moved a significant distance since its last use.

6.2 Sensor Connection Problems

• Sensor Not Found: Check if the sensor is active (e.g., spinning the wheel/crank, wearing the heart rate strap). Ensure the sensor's battery is not depleted.
• Ntinye aka: Move away from other electronic devices that might cause interference.
• Tinyegharịa ụzọ: Try unpairing and re-pairing the sensor through the device settings.

6.3 Bryton Active App Sync Issues

• Connection Failure: Ensure Bluetooth is enabled on your phone and the Rider 320. Restart both the device and the app.
• Slow Sync: Data transfer can sometimes be slow. Ensure a stable Bluetooth connection and sufficient battery on both devices.
• Data Loss (Rare): If you experience data loss or persistent sync issues, try updating the device firmware and reinstalling the app. Contact Bryton support if problems persist.

6.4 Ngwaọrụ anaghị aza

If the device freezes or becomes unresponsive, perform a soft reset by pressing and holding the power button for approximately 10-15 seconds until it powers off. Then, power it back on normally.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

Bryton products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Bryton website. For technical support, troubleshooting assistance, or service inquiries, please contact Bryton customer support through their official websaịtị ma ọ bụ ụlọ ọrụ enyere ikike.

Official Bryton Websaịtị: www.brytonsport.com