Tyger Auto 3.5" Rider Running Boards Installation and User Manual

Ngwaahịa gafereview

The Tyger Auto 3.5" Rider Running Boards are designed to provide a secure and convenient step for entering and exiting your vehicle. These running boards feature a durable construction with a textured black finish for enhanced grip and corrosion resistance. They are specifically engineered for the specified vehicle models to ensure a precise fit and straightforward installation.

Image: Pair of Tyger Auto 3.5" Rider Running Boards with textured black finish.

Ndakọrịta

These running boards are compatible with the following vehicle models:

• 2005-2023 Toyota Tacoma Access Cab

Ihe dị mkpa ịdeba ama nha kabọd: These running boards are designed exclusively for Access Cab models, which feature 2 full-size front doors and 2 rear suicide doors. They are ọ bụghị compatible with Double Cab models (4 full-size doors) or Regular Cab models (2 full doors).

Image: Visual guide illustrating Regular Cab, Access Cab, and Double Cab configurations for Toyota Tacoma, highlighting Access Cab as compatible.

Ntọala na nwụnye

Installation of the Tyger Auto Rider Running Boards is designed to be a straightforward bolt-on process, requiring no drilling for most applications. The package includes all necessary hardware and brackets for mounting onto the vehicle's rocker panel.

Ngwa gụnyere:

• Ụgbọ ala n'akụkụ na-agba ọsọ
• Ụgbọ mmiri na-agba ọsọ n'akụkụ njem
• Ihe nkwado ndị a na-etinye (nke a kapịrị ọnụ maka ụdị ụgbọala)
• All necessary bolts, washers, and nuts

Nzọụkwụ nwụnye:

1. Nkwadebe: Ensure your vehicle is parked on a level surface and the engine is off. Gather all tools required (typically a wrench set).
2. Chọpụta ebe mgbago: Locate the factory pre-drilled holes on the vehicle's rocker panel or frame. These are where the mounting brackets will attach.


Foto: nso nso view of pre-drilled thread holes on the vehicle's underside, indicating mounting points for brackets.

3. Tinye eriri: Secure the appropriate mounting brackets to the vehicle's frame using the provided hardware. Do not fully tighten bolts at this stage to allow for adjustment.


Foto: N'okpuru view showing a running board bracket bolted to the vehicle frame.

4. bọọdụ ịgba ọsọ ugwu: Carefully position the running boards onto the attached brackets. Align the holes on the running boards with the holes on the brackets. Insert the remaining hardware.
5. Hazie na mechie: Adjust the position of the running boards and brackets to ensure proper alignment and desired spacing from the vehicle body. Once satisfied with the positioning, fully tighten all bolts to secure the running boards.
6. Nyocha ikpeazụ: Verify that both running boards are securely attached and stable before driving.

Installation typically takes approximately 20 minutes.

Ntuziaka ọrụ

The Tyger Auto Rider Running Boards provide a stable and wide stepping surface to assist with vehicle entry and exit. The 3.5-inch wide step pad features a non-slip surface for enhanced stability.

Foto: nso nso view illustrating the 3.5-inch width of the running board step surface.

Ike ibu:

• Each running board has a maximum weight limit of 300 pound. Exceeding this limit may compromise the integrity of the running board and its mounting system.

Nlekọta

Proper maintenance will ensure the longevity and appearance of your running boards.

Nhicha:

• Regularly clean the running boards with mild soap and water to remove dirt, mud, and road grime.
• Avoid using abrasive cleaners, harsh chemicals, or stiff brushes, as these can damage the textured powder coat finish.
• Jiri mmiri dị ọcha kpochaa nke ọma ma jiri akwa dị nro kpoo ya ka ọ ghara ịchọta mmiri.

Nchekwa corrosion:

The running boards feature an E-coating and heavy textured powder finish designed to resist rust and corrosion. This multi-layer protection helps to keep moisture and dirt away from the carbon steel structure.

Image: Diagram showing the three layers of protection: pre-treatment, special E-coating, and dual-stage textured black powder coat.

Image: Running board in a rainy environment, emphasizing its rust-resistant E-coating and textured black finish.

Nyocha:

• Periodically inspect all mounting hardware for tightness. Re-tighten any loose bolts to ensure the running boards remain secure.
• Check for any signs of damage or wear on the running boards or step pads.

Nchọpụta nsogbu

Okwu nwụnye:

• Misaligned Brackets/Holes: If brackets do not align perfectly with vehicle holes, ensure all bolts are kept loose during initial assembly. This allows for minor adjustments to align components before final tightening. Verify that the correct brackets are used for each position (front, middle, rear).
• Difficulty with Threaded Holes: For older vehicles, factory threaded holes may accumulate rust or debris. It may be necessary to clean or re-tap these holes before installation.
• Incorrect Cab Type: Double-check that your vehicle is an Access Cab. These running boards are not designed for Double Cab or Regular Cab models, and attempting to install them on an incompatible cab type will result in fitment issues. Refer to the compatibility section and image for clarification.

Okwu n'ozuzu:

• Loose Running Boards: If running boards feel unstable, inspect all mounting bolts and re-tighten them to the recommended torque specifications.
• Mkpọtụ na-adịghị ahụkebe: Rattling or squeaking may indicate loose hardware. Inspect and tighten all connections.

Nkọwapụta

Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike:

Tyger Auto provides a 5-afọ akwụkwọ ikike for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.

Nkwado ndị ahịa:

For technical assistance, warranty claims, or any product-related inquiries, please visit the official Tyger Auto store or contact their customer service department.

Tyger Auto Official Store: Visit Tyger Auto Store on Amazon