Ngwaahịa gafereview
This manual provides instructions for the Lepro 32.8ft Dimmable Warm White LED Strip Light. This product is designed to provide versatile and adjustable lighting for various indoor applications, including kitchens, bedrooms, and living areas. It features a warm white light at 3000K and includes a dimmer for brightness control.
Image: The complete Lepro LED Strip Light kit, including the 32.8ft LED strip on a reel, a dimmer switch, and a power adapter.
Kedu ihe gụnyere
The standard kit for your Lepro LED Strip Light includes the following components:
- 1 x 32.8ft (10m) Non-Waterproof LED Light Strip
- 1 x Dimmer Switch
- 1 x Power Adapter (US plug)
Ntọala na nwụnye
Follow these steps for proper installation of your LED strip light:
- Kwadebe elu: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
- tụọ na bee (nhọrọ): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually indicated by a copper pad and a scissor icon). Do not cut in other areas.
- Apply the Strip: Peel off the protective backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying firm and even pressure along its entire length to ensure strong adhesion.
- Chekwaa na obere vidiyo (Nhọrọ): For added security, especially on textured surfaces or corners, use fixing clips (if provided or purchased separately) to reinforce the strip's placement.
- Jikọọ akụrụngwa: Connect the LED strip to the dimmer switch, and then connect the dimmer switch to the power adapter. Ensure all connections are secure.
- Tinye: Tinye ihe nkwụnye ọkụ n'ime oghere eletrik ọkọlọtọ.
Image: A visual guide demonstrating the installation process: wiping the surface, peeling the adhesive, and using fixing clips.
Ntuziaka ọrụ
The Lepro LED Strip Light is designed for simple operation:
- Gbanyụọ/ Gbanyụọ: Use the switch on the dimmer control to turn the lights on or off.
- Gbanwee ihie: Rotate the knob on the dimmer switch to adjust the light intensity from 10% to 100%.
Image: A close-up of the LED strip and dimmer, illustrating the adjustable brightness levels from 10% to 100%.
Nlekọta
To ensure the longevity and optimal performance of your LED strip light:
- Nhicha: Gently wipe the LED strip with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the strip or its components.
- gburugburu: This product is designed for indoor use only. Avoid exposure to water, high humidity, or extreme temperatures.
- Njikọ: Lelee njikọ niile kwa oge iji hụ na ha nọ na nchekwa.
Nchọpụta nsogbu
If you encounter issues with your Lepro LED Strip Light, refer to the following common problems and solutions:
- Ọkụ anaghị agbanwu:
- Check if the power adapter is securely plugged into a working electrical outlet.
- Ensure all connections between the strip, dimmer, and power adapter are firm.
- Verify the dimmer switch is in the 'On' position and not set to minimum brightness.
- Lights Flickering or Dim:
- Lelee maka njikọ adịghị mma.
- Ensure the power adapter is providing sufficient power.
- Adjust the dimmer to a higher brightness setting.
- Adhesive anaghị ejide:
- Ensure the installation surface was thoroughly cleaned and dried before application.
- Apply additional fixing clips for better adhesion, especially on uneven or porous surfaces.
- Section of Strip Not Lighting Up:
- This may indicate a break in the circuit. Inspect the strip for any visible damage or sharp bends, particularly if it was cut or bent excessively during installation.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | PR410088-WW-US |
| Ogologo | 32.8 ụkwụ (10 mita) |
| Agba ọkụ | Ọcha na-ekpo ọkụ |
| Okpomọkụ agba | 3000 Kelvin |
| Ụdị isi iyi ọkụ | LED (SMD 2835) |
| Ọnụọgụ nke LED | 420 (as per product description, 600 in some specs) |
| Flux na-egbuke egbuke | 1800 Lumen |
| Voltage | 24 volts DC |
| Wattage | 18 watt |
| Njirimara Pụrụ Iche | Enwere ike ibelata |
| Ojiji ime ime/n'èzí | Ime ụlọ |
| Ụdị nrapado | 3M Mezie |
Image: A hand holding the illuminated LED strip, next to the UL Listed power adapter, highlighting product safety.
Akwụkwọ ikike na nkwado
For warranty information or customer support, please refer to the documentation included with your product or visit the official Lepro websaịtị. Usoro na ọnọdụ akwụkwọ ikike akọwapụtara nwere ike ịdị iche.
