Okwu mmalite
This manual provides detailed instructions for the assembly, operation, and maintenance of your RFIVER TF3001 TV Floor Stand. Please read these instructions carefully before installation to ensure safe and correct usage. This stand is designed for televisions ranging from 32 to 65 inches, with a maximum VESA pattern of 400x400mm and a weight capacity of up to 35 kg (77 lbs).
Ozi nchekwa
- Agafela ikike ịdị arọ kacha nke kilogram 35 (77 lbs).
- Ensure your TV's VESA pattern is compatible (100x100mm to 400x400mm).
- Always assemble the stand on a soft, clean surface to prevent scratches.
- Verify all screws and bolts are securely tightened before placing the TV on the stand.
- Debe ụmụaka na anụ ụlọ n'oge mgbakọ.
- Anwala ịgbanwe ihe nkwụnye ahụ n'ụzọ ọ bụla.
Ihe ngwugwu
Please check that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.
- Isi Nkwado Ogidi
- Ise iko dị ọkụ
- Ihe nrịbama TV
- VESA Adapter Plates (if applicable)
- Hardware Kit (screws, washers, spacers, nuts)
- Mpempe akwụkwọ njikwa eriri
- Ngwa Mgbakọ (dịka ọmụmaatụ, Allen wrench)
- Akwụkwọ ntuziaka
Ntuziaka nhazi
Follow these steps carefully for proper assembly.
Step 1: Assemble the Base and Support Pole
Attach the main support pole to the tempered glass base using the provided hardware. Ensure the pole is securely fastened to the base for stability.
Image: The assembled RFIVER TF3001 TV Floor Stand, ready for TV mounting.
Step 2: Determine VESA Pattern and Attach Brackets to TV
Identify your TV's VESA mounting pattern (the distance between the mounting holes on the back of your TV). Select the appropriate screws, washers, and spacers from the hardware kit. Attach the TV mounting brackets to the back of your television. Ensure the brackets are level and securely tightened.
Foto: Example of VESA mounting holes on a TV back panel.
Image: VESA compatibility chart and stand dimensions.
Step 3: Mount the TV to the Stand
Carefully lift the TV (with assistance if necessary) and hook the attached brackets onto the mounting plate of the stand. Ensure the TV is centered and level. Secure the TV using the safety lock mechanism to prevent accidental dislodgement.
Image: Detail of the safety lock for securing the TV.
Ntuziaka ọrụ
Ndozi elu
The TV stand allows for height adjustment between 1000mm and 1300mm. To adjust the height, loosen the securing bolts on the main support pole, carefully raise or lower the TV to the desired position, and then securely tighten the bolts. Always ensure the TV is stable after adjustment.
Image: Illustration of the height adjustment mechanism.
Ọrụ Swivel
The TV mounting bracket can swivel 60 degrees (30 degrees left and 30 degrees right) to provide optimal viewing angles. Gently rotate the TV to your preferred position. No tools are required for this adjustment.
Image: Visual representation of the 60-degree swivel range.
Image: Close-up of the swivel joint.
Njikwa USB
Utilize the integrated cable management clips on the rear of the main support pole to organize and conceal TV cables. This helps maintain a tidy appearance and prevents cable clutter.
Image: Cable management clips on the stand's pole.
Nlekọta
- Nhicha: Jiri nwayọ hichaa ihe nkwụnye ahụ, damp ákwà. Zere ihe nhicha ma ọ bụ ihe mgbaze nke nwere ike imebi ihe ahụ.
- Nyocha oge: Lelee skru na bolts niile iji hụ na ha kwụgidere. Tinyegharịa ọzọ ma ọ dị mkpa.
- Glass Base Care: The tempered glass base is durable but can be scratched. Use coasters for items placed on it and avoid dropping heavy objects.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| TV abụghị ọkwa. | Mounting brackets are not aligned or tightened unevenly. | Re-check the alignment of the TV mounting brackets and ensure all screws are tightened evenly. |
| Nkwụsi ike na-eche na ejighị n'aka. | Loose connections or uneven floor surface. | Verify all assembly bolts are securely tightened. Ensure the stand is placed on a flat, stable surface. Check non-slip feet. |
| TV cannot be mounted. | Ụkpụrụ VESA ma ọ bụ nha/ibu TV na-ezighi ezi. | Confirm your TV's VESA pattern and weight are within the stand's specifications (Max VESA 400x400mm, Max 35kg/77lbs). |
Nkọwapụta
| Akara: | RFIVER |
| Ụdị: | TF3001 |
| Nha TV dakọtara: | 32-65 sentimita asatọ |
| Max VESA Compatibility: | 400x400mm (also supports 100x100, 100x200, 200x100, 200x200, 300x200, 200x300, 300x300, 400x200, 400x300) |
| Max arọ ikike: | 35 n'arọ (77 lbs) |
| Oke mmezi ịdị elu: | 1000mm - 1300mm |
| Akụkụ Swivel: | ±30 degrees (60 degrees total) |
| Ihe: | Alloy Steel, Igwe ọkụ |
| Agba: | Nwa |
| Akụkụ ngwaahịa (L x W x H): | 55 x 38 x 130 cm (approximate, at max height) |
| Arọ ngwaahịa: | 8.8 n'arọ |
Akwụkwọ ikike na nkwado
RFIVER products are designed for durability and performance. For any questions, missing parts, or support needs, please contact RFIVER customer service. Please retain your proof of purchase for warranty claims.
For further assistance, please visit the official RFIVER websaịtị ma ọ bụ kpọtụrụ ọwa nkwado ndị ahịa ha.
