Golden Lighting Florence 3-Light Pendant Instruction Manual

Okwu mmalite

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Golden Lighting Florence 3-Light Pendant. Please read this manual thoroughly before beginning installation and retain it for future reference. This fixture is designed for indoor use only and features a unique handwoven natural raphia rope shade with a matte black frame, blending modern and rustic aesthetics.

Foto 1: The Golden Lighting Florence 3-Light Pendant. This image showcases the fixture's distinctive handwoven natural raphia rope shade and matte black metal components, highlighting its design and texture.

Ozi nchekwa

• Ịdọ aka ná ntị: Ihe egwu nke ujo eletriki. Kwụpụ ike na ihe mgbawa sekit ma ọ bụ igbe fuse tupu etinye ma ọ bụ rụzie ya.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with installing electrical fixtures.
• This fixture is intended for indoor use only. Do not expose to water or excessive moisture.
• Jiri naanị bọlbụ nke ụdị na wat akọwapụtaratage. Refer to the "Specifications" section for bulb requirements.
• Do not install this fixture on a ceiling that is less than 8 feet (2.4 meters) high.
• Gbaa mbọ hụ na elu elu nwere ike ịkwado ịdị arọ nke ihe nrụnye.
• Na-eyi enyo nchekwa mgbe niile mgbe ị na-etinye ya.
• Handle the natural raphia rope shade with care to avoid damage.

Ihe ngwugwu

Carefully unpack your fixture and identify all parts. Keep all packaging materials until installation is complete to prevent accidental disposal of small parts.

• Fixture Body with Raphia Rope Shade (1)
• Efere Efere (1)
• Canopy (1)
• Agbụ (1)
• Akụ waya (3)
• Ihe mgbakwasị ụkwụ (2)
• Mkpọsa ala (1)
• Akwụkwọ ntuziaka (1)

Note: Bulbs are not included and must be purchased separately.

Ntọala na nwụnye

Before starting, ensure the power is turned off at the circuit breaker. This fixture requires assembly and professional installation is recommended.

1. Gbanyụọ ike: Locate the circuit breaker that supplies power to the junction box where you will install the fixture. Turn the breaker to the OFF position.
2. Kwadebe efere mgbakwasa: Attach the mounting plate to the junction box using the provided mounting screws. Ensure the plate is securely fastened.
3. Hazie Ogologo Chain: Determine the desired hanging height for your pendant. Adjust the chain length by removing links as necessary. Thread the fixture wires through the chain and canopy.
4. Mepụta njikọ eletrik:
   • Jikọọ nwa waya site na nkwụnye ahụ ruo na nwa waya (ọkụ) sitere na igbe njikọ site na iji waya aki.
   • Jikọọ ọcha waya site na nkwụnye ahụ ruo na ọcha waya (nke na-anọpụ iche) site na igbe njikọ site na iji waya aki.
   • Jikọọ ala wire from the fixture (bare copper or green) to the ala wire from the junction box (bare copper or green) and to the ground screw on the mounting plate.

   Ensure all wire nuts are securely twisted and no bare wire is exposed.
5. Ugwu Canopy: Carefully push the wired canopy up to the ceiling, aligning the canopy screws with the holes in the mounting plate. Secure the canopy in place with the decorative nuts.
6. Wụnye Bulbs: Screw three E26 medium base bulbs (not included) into the sockets. Do not exceed the maximum wattage nke 60 watts kwa bọlbụ.
7. Weghachi ike: Once installation is complete, turn the power back on at the circuit breaker. Test the fixture to ensure it functions correctly.

Foto 2: Dimensional diagram of the Florence 3-Light Pendant. This illustration provides approximate measurements for the fixture (18.5 x 18.5 x 25.13 inches) and suggests suitable hanging heights in relation to common furniture like dining tables, indicating a recommended clearance of 30 inches above a 30-inch high table.

Ntuziaka ọrụ

The Golden Lighting Florence 3-Light Pendant is operated via a standard wall switch (not included). Ensure the correct type of bulbs are installed for optimal performance.

• Agbanye/ Gbanyụọ: Flip the wall switch connected to the fixture to turn the lights on or off.
• Njirimara nwere ike imebi: This fixture is dimmable. If you wish to utilize the dimming function, ensure you use dimmable E26 LED or incandescent bulbs and connect the fixture to a compatible dimmer switch (sold separately).

Foto 3: The Florence 3-Light Pendant installed in a dining area. This image demonstrates the fixture's aesthetic integration into a living space, highlighting its natural fiber shade and the warm ambiance it provides.

Nlekọta

Nlekọta mgbe niile ga-enyere aka chekwaa ọdịdị na ọrụ nke ìhè pendant gị.

• Nhicha:
  • Kwupu ike mgbe niile tupu ihicha.
  • For the metal frame, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • For the natural raphia rope shade, gently dust with a soft brush or a dry cloth. Avoid using wet cloths or liquid cleaners on the rope, as moisture can damage the natural fibers.
• Ndokwa bọlbụ:
  • Ensure the fixture is cool and power is disconnected before replacing bulbs.
  • Unscrew the old bulb and screw in a new E26 medium base bulb, ensuring it does not exceed 60 watts.

Nchọpụta nsogbu

Nkọwapụta

Akwụkwọ ikike na nkwado

Golden Lighting stands behind the quality of its products.

• Akwụkwọ ikike: Ngwaahịa a na-abịa na a 1-afọ akwụkwọ ikike against structural defects and a Akwụkwọ ikike nke ọnwa 6 against finish defects from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear.
• Nkwado ndị ahịa: For technical assistance, missing parts, or warranty claims, please contact Golden Lighting customer service. Refer to the official Golden Lighting website for the most current contact information. When contacting support, please have your model number (6933-3P BLK-NR) and proof of purchase readily available.