Okwu mmalite
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Ntuziaka nchekwa
Ịdọ aka ná ntị Nchekwa Ngwá Ọrụ Ike General:
- Nchekwa mpaghara ọrụ: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Nchekwa Eletriki: Zenarị mmetụ ahụ n'elu ala ala ma ọ bụ n'ala dị ka ọkpọkọ, radiators, ranges, na friji. Enwere nnukwu ihe ize ndụ nke ujo eletrik ma ọ bụrụ na ahụ gị agbaala n'ala ma ọ bụ gbatuo.
- Nchekwa nkeonwe: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Iji na Nlekọta Ngwa Ike: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Nlekọta: Jikwaa ngwaọrụ ike na ngwa. Lelee maka ndakọrịta ma ọ bụ njikọ nke akụkụ ndị na-akpụ akpụ, mgbaji akụkụ, yana ọnọdụ ọ bụla ọzọ nwere ike imetụta ọrụ ngwa ike.
Specific Circular Saw Safety Warnings:
- Wepu aka ka ọ ghara igbutu ebe na agụba. Adịla n'okpuru workpiece.
- Gbanwee omimi nke ịkpụ to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Ejila ihe nzacha ma ọ bụ ihe mgbochi agụba mebiri emebi ma ọ bụ ezighi ezi.
Ngwaahịa gafereview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Isi ihe:
- Isi njikwa: Ergonomic grip for primary control and operation.
- Aka inyeaka: Provides additional stability and control during cutting.
- Mgbanwu ma ọ bụ gbanyụọ: Na-arụ ọrụ ma gbanyụọ moto ahụ.
- Mkpọchi Spindle: Button used to lock the spindle for safe and easy saw blade changes.
- Nchekwa agụba: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Ntugharị Ndozi Omimi: Mechanism for setting the desired cutting depth.
- Ntugharị Ndozi Bevel: Mechanism for setting the desired cutting angle for bevel cuts.
- Ahụhụ Blade: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Ihe nkwụnye nbipụta uzuzu: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Melite
1. Ntinye batrị
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- Slide the battery pack into the receptacle until it clicks securely into place.
- Iji wepụ, pịa bọtịnụ ntọhapụ dị na ngwugwu batrị wee wepụ ya.
2. Saw Blade Installation
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Pịa ma jide bọtịnụ mkpọchi spindle iji gbochie agụba ahụ ịtụgharị.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Wepu flange dị n'èzí na agụba ochie ochie.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Ịgbanwe Omimi Mbelata
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Tọpụ ihe nleba anya mgbanwe omimi.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Tighten the depth adjustment lever securely to lock the setting.
4. Ịgbanwe Akuku Bevel
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Mepee eriri mgbazi mgbanaka.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Ntuziaka ọrụ
1. Mmalite na ịkwụsị
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Ịkpụcha ihe
- Jiri cl mee ka ọrụ ahụ sie ikeamps iji gbochie mmegharị n'oge ịkpụ.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Malite nkwọ ahụ ma kwe ka agụba ahụ ruo ọsọ zuru oke tupu ị tinye ihe ahụ n'ọrụ.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Mwepụ uzuzu
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Nlekọta
Nhicha
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Nlekọta agụba
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Nchekwa
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Saw anaghị amalite | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Saw cuts slowly or binds | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Oke ịma jijiji | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Poor cut quality (rough edges, splintering) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Nkọwapụta
- Ụdị: Einhell TE-CS 18/165-1 Li-Solo
- Voltage: 18 V (Battery Operated)
- Ọsọ enweghị ibu: 4,200 rpm
- Dayameta agụba: 165 mm
- Dayameta Oghere Arbor: 20 mm
- Oke Omimi Mbelata (90°): Ihe dịka 54 mm
- Oke Omimi Mbelata (45°): Ihe dịka 35 mm
- Ibu ihe: 2.72kg (enweghị batrị)
- Ihe agụba: Steel dị elu
- Ọnụọgụ nke eze: 24
- Njirimara Pụrụ Iche: Ịrụ ọrụ ikuku
- Ngwa gụnyere: hụrụ Agụba
- Mara: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Akwụkwọ ikike na nkwado
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
