VISION Talking Analog and Digital Watch User Manual

Okwu mmalite

Thank you for choosing the VISION Talking Analog and Digital Watch. This watch is designed to provide clear time announcements in Spanish, making it ideal for individuals with visual impairments, children, and the elderly. It features both an analog display for traditional time-telling and a digital display for precise readings, along with an alarm function.

Foto 1: N'ihu view of the VISION Talking Analog and Digital Watch.

Melite

1. Mwepu na nyocha izizi

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. The watch comes with a battery pre-installed and is ready for initial setup.

Figure 2: The watch as it appears in its original clear plastic case.

2. Initial Time Setting (Digital)

The digital time needs to be set first. Refer to the 'Operating Instructions' section for detailed steps on setting the digital time using the 'MODE', 'HOUR', and 'MINUTE' buttons.

3. Initial Time Setting (Analog)

The analog hands are set independently using the crown (small knob) on the side of the watch. Pull out the crown and rotate it to adjust the analog hands to match the digital time. Push the crown back in to secure the setting.

Ntuziaka ọrụ

Ọrụ bọtịnụ

• Bọtịnụ MODE: Used to cycle through different modes (Time, Alarm Setting).
• TALKING Button: Press to hear the current time announced in Spanish.
• Bọtịnụ AWA: Used to adjust the hour in setting modes.
• MINUTE Button: Used to adjust the minute in setting modes.
• Okpueze: Used to set the analog hands.

Telling Time

• Ọkwa olu: Pịa IKWUO button to hear the current time spoken aloud in Spanish.
• Ngosipụta Digital: The digital display shows the time in a 12-hour format (AM/PM).
• Ngosipụta analog: The traditional hands indicate the hour and minute.

Ịtọ oge dijitalụ

1. Pịa MODE bọtịnụ ugboro ugboro ruo mgbe ngosipụta dijitalụ na-egosi ọnọdụ ntọala oge (a na-egosikarị site na ọnụọgụgụ na-enwu gbaa).
2. Jiri ihe Awa button to adjust the hour. Pay attention to AM/PM indicators.
3. Jiri ihe nkeji bọtịnụ ka ịhazie nkeji.
4. Pịa MODE button again to confirm and exit the time setting mode.

Ịtọ ntọala mkpu

1. Pịa MODE button until the alarm setting mode is displayed (often indicated by an alarm icon or 'AL').
2. Jiri ihe Awa bọtịnụ ka ịtọọ oge oti mkpu chọrọ.
3. Jiri ihe nkeji bọtịnụ iji tọọ nkeji mkpu achọrọ.
4. Pịa MODE button to activate the alarm and exit the setting mode.
5. To turn off a sounding alarm, press any button.

Nlekọta

Nhicha

Iji hichaa elekere gị, jiri ákwà dị nro ma kpọọ nkụ hichaa ya nke ọma. Maka unyi siri ike, jiri obere d hichaa ya.amp cloth can be used, but ensure no moisture enters the watch. Avoid using harsh chemicals or abrasive materials.

Ngbanwe batrị

The watch uses a Lithium-metal battery. When the voice announcement becomes faint or the digital display dims, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and function.

Mmiri Nguzogide

This watch is marked as "WATER RESISTANT." This typically means it can withstand splashes, rain, or brief immersion in water, such as washing hands. It is ọ bụghị suitable for swimming, showering, or diving. Prolonged exposure to water or submersion may cause damage.

Nchọpụta nsogbu

• No Voice Announcement:
  • Check battery level. Replace if low.
  • Ensure the TALKING button is pressed firmly.
• Ngosipụta dijitalụ enweghị oghere ma ọ bụ gbagọrọ agbagọ:
  • Battery may be depleted. Replace the battery.
• Oge Ezughi Ezu:
  • Re-set the digital time following the instructions in the 'Operating Instructions' section.
  • Ensure the analog hands are synchronized with the digital time by adjusting the crown.
  • Low battery can affect timekeeping accuracy. Consider battery replacement.
• Oti mkpu na-adịghị ada:
  • Ensure the alarm is set correctly and activated.
  • Lelee ọkwa batrị.

Nkọwapụta

Figure 3: Watch face diameter measurement (40 mm).

Figure 4: Watch case thickness measurement (16 mm).

Figure 5: Watch strap width measurement (18 mm).

Ọgụgụ 6: Ọpụamples of wrist circumference fit (20 cm and 12 cm).

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the documentation included with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.