Wortex® Drake 200L Wood Chipper User Manual

1. Ngwaahịa gafereview

The Wortex Chipper D200 L wood chipper is engineered for efficient maintenance of parks, gardens, and various green spaces. Designed to handle demanding tasks, it consistently grinds wood with a maximum diameter of 80 mm. This robust machine is powered by a Loncin G 200 6.5 HP gasoline engine.

Its grinding system features a solid, reinforced roller equipped with double blades and a 150 mm anvil, ensuring precise cuts up to 80 mm. A protective belt transmission system enhances machine longevity. For user safety, an emergency lever at the material inlet provides an immediate stop function. Portability is facilitated by two 10-inch pneumatic wheels and a comfortable rounded handle.

Akụkụ ndị bụ isi:

• Igwe: G 420 manual start
• Nkwagharị: 420 cc
• Ụdị mmanụ ụgbọala: mmanụ ụgbọala
• Ike tankị: 6 lita
• Sistemụ ịkpụ: Roller with 2 blades of 300 mm

Ọgụgụ 1.1: N'ozuzu view of the Wortex Drake 200L wood chipper, showing the main body, engine, input chute, discharge chute, and wheels.

2. Ozi nchekwa

WARNING: Read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in serious injury.

• This product contains moving parts that can cause severe injury. Always operate with extreme caution and strictly adhere to all instructions provided in this manual.
• The use of gasoline-based fuel produces carbon monoxide, a colorless and odorless gas that can be fatal. Always operate the wood chipper in a well-ventilated outdoor area. Never operate indoors or in enclosed spaces.
• This product is heavy (approximately 175 kg). Exercise extreme care when handling and moving the unit. Follow proper lifting and storage procedures to prevent injury.
• Always wear appropriate personal protective equipment (PPE) during operation, including safety glasses or goggles, hearing protection, and heavy-duty gloves.
• Keep hands, feet, and clothing away from all moving parts, especially the input and discharge chutes, during operation.
• Ensure the emergency stop lever is easily accessible and functional before each use.

3. Ntọala na Mgbakọ

3.1 Nwepu

Carefully remove all components from the packaging. Inspect for any shipping damage. Retain packaging materials for future storage or transport if needed.

3.2 Wheel and Handle Assembly

1. Attach the two 10-inch pneumatic wheels to the axle using the provided hardware. Ensure they are securely fastened.
2. Mount the rounded handle to the designated points on the frame. Tighten all bolts firmly.

3.3 Nlele Tupu Ọrụ

• Mmanụ Engine: Check the engine oil level using the dipstick. Add recommended engine oil if necessary, ensuring it is at the proper level.
• Mmanụ ụgbọala: Jupụta mmanụ ụgbọala ọhụrụ mmanụ ụgbọala na-adịghị edu. Ejula afọ.
• Akara: Inspect the cutting blades for sharpness and damage. Replace or sharpen if needed.
• Ihe nkwụnye: Verify that all nuts, bolts, and screws are tight before starting the machine.

4. Ntuziaka ọrụ

4.1 Malite Engine

1. Ensure the wood chipper is on a stable, level surface.
2. Mepee valvụ mmanụ ụgbọala.
3. Set the choke lever to the 'CHOKE' position (for cold starts).
4. Move the throttle lever to the 'FAST' position.
5. Pull the recoil starter handle firmly until the engine starts.
6. Once the engine starts, gradually move the choke lever to the 'RUN' position as the engine warms up.

4.2 Feeding Material

Only feed organic material such as branches, brushwood, and logs into the input chute. Do not feed metal, rocks, plastic, or other non-organic materials.

Ọgụgụ 4.1: nso nso view of the large input chute of the Wortex Drake 200L wood chipper, designed for feeding branches and brushwood.

1. Ensure the discharge chute is clear and directed away from people, animals, and structures.
2. Feed material slowly and steadily into the input chute. Do not force material.
3. Maintain a safe distance from the opening of the chute. Use a push stick if necessary for smaller pieces.
4. The maximum recommended branch diameter is 80 mm (3.15 inches).

Ọgụgụ 4.2: Zuru ezu view of the internal cutting mechanism of the Wortex Drake 200L wood chipper, showing the double blades and anvil for efficient shredding.

4.3 Nkwụsị Mberede

In case of an emergency or jam, immediately push the emergency stop lever located at the material inlet. This will quickly halt the machine's operation.

4.4 Mechie

1. Allow the engine to idle for a few minutes to cool down.
2. Move the throttle lever to the 'STOP' or 'OFF' position.
3. Mechie valvụ mmanụ ọkụ.
4. Allow the machine to cool completely before cleaning or storage.

5. Nlekọta

Regular maintenance is crucial for the longevity and safe operation of your Wortex wood chipper.

5.1 Nhicha

• After each use, clear any debris from the input and discharge chutes.
• Jiri mgbasa ozi hichaa mpụta igweamp cloth. Do not use high-pressure washers directly on the engine or electrical components.

5.2 Blade Inspection and Sharpening

• Regularly inspect the cutting blades for dullness, nicks, or damage.
• Dull blades reduce chipping efficiency and can strain the engine. Sharpen or replace blades as needed. Refer to the engine manual for specific blade removal and installation instructions.

5.3 Nlekọta injin

• Mgbanwe mmanụ: Change the engine oil after the first 5 hours of use, then every 25-50 hours or annually, whichever comes first.
• Ihe nzacha ikuku: Na-asachapụ ma ọ bụ dochie ihe nzacha ikuku mgbe niile, ọkachasị n'ọnọdụ uzuzu uzuzu.
• Nkwụnye Spark: Inspect and clean the spark plug annually. Replace if worn.

5.4 Belt Inspection

Check the drive belt for wear, cracks, or proper tension periodically. Adjust or replace if necessary.

5.5 Nchekwa

When storing the wood chipper for extended periods, drain the fuel tank or use a fuel stabilizer. Store in a dry, protected area.

6. Nchọpụta nsogbu

Nkebi a na-enye azịza maka nsogbu ọrụ a na-ahụkarị. Maka nsogbu ndị a na-edeghị ebe a, kpọtụrụ ndị ahịa.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

Wortex products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Wortex website. For technical support, spare parts, or service inquiries, please contact your authorized Wortex dealer or the customer service department.

When contacting support, please have your product model number (Drake 200L) and serial number (if applicable) readily available.