1. Okwu mmalite
Thank you for choosing the HBN Outdoor Wireless Remote Control Outlet. This device provides a simple and convenient way to control your electrical appliances, lights, and decorations from a distance. Designed for both indoor and outdoor use, it features a weatherproof construction and a reliable wireless signal.
2. Ozi nchekwa
Biko gụọ ma ghọta ntuziaka nchekwa niile tupu i jiri ngwaahịa a. Ọdịda ịgbaso ntuziaka ndị a nwere ike ibute ujo ọkụ eletrik, ọkụ ma ọ bụ mmerụ ahụ dị egwu.
- For Outdoor Use: Ensure the outlet is plugged into a Ground Fault Circuit Interrupter (GFCI) protected receptacle.
- Ịkwanye: When used outdoors, mount the outlet vertically with the receptacles facing downwards, at least 2 feet (0.6 meters) above ground level, to prevent water ingress.
- Ike ibu: Do not exceed the maximum electrical ratings: 125V, 15A/1875W resistive, 10A/1250W tungsten, 1/2HP.
- Mkpughe mmiri: Do not immerse the product in water. Avoid direct water spray onto the outlets.
- Ụmụaka: Debe ebe ụmụaka na-apụghị iru.
- Mmebi: Do not use if the product or its cord is damaged.
- Mbupu: Do not attempt to disassemble or repair the unit. Contact customer support for assistance.
3. Ihe ngwugwu
- HBN Outdoor Wireless Remote Control Outlet Unit(s) (Quantity may vary based on pack purchased)
- Wireless Remote Control(s)
- 12V 23A Battery (for remote control)
4. Ngwaahịa gafereview
The HBN remote control outlet system consists of a receiver unit (the outlet plug) and a transmitter unit (the remote control). The receiver unit features dual 3-prong outlets and a manual ON/OFF button. The remote control allows for convenient operation from up to 100 feet in line-of-sight.
5. Nhazi ntuziaka
5.1. Nwụnye batrị dịpụrụ adịpụ
- Mepee mkpuchi mkpuchi batrị dị n'azụ nke njikwa anya.
- Insert one 12V 23A battery, ensuring the correct polarity (+ and - signs).
- Mechie mkpuchi oghere batrị.
5.2. Plugging in the Outlet Unit
- Plug the HBN Outdoor Wireless Remote Control Outlet into a standard 125V electrical receptacle.
- For outdoor use, ensure the receptacle is GFCI protected and the outlet unit is mounted vertically at least 2 feet above ground.
- The outlet is pre-programmed for immediate use.
6. Ntuziaka ọrụ
6.1. Basic ON/OFF Operation
- Iji Remote Control: Press the "ON" button on the remote to turn on connected devices. Press the "OFF" button to turn them off. The remote can control the outlets from up to 100 feet in line-of-sight, even through walls and doors.
- Using the Manual Button: Each outlet unit has a manual power button. Press this button to toggle the power ON or OFF for the connected devices.
6.2. Pairing Receiver to Transmitter
If you need to pair a receiver outlet to a remote control, follow these steps:
- Tinye nkwụnye nnata n'ime oghere ọkụ.
- Press and hold the ON/OFF button on the receiver outlet for 3 seconds. The LED indicator will start flashing slowly.
- Release the ON/OFF button on the receiver and press either the ON or OFF button on the transmitter (remote control) to pair the transmitter to the receiver.
Video: An official HBN video demonstrating the pairing process for the outdoor remote control outlet. It shows how to press and hold the button on the outlet unit and then use the remote to establish a connection.
6.3. Resetting an Outlet
If you wish to unpair an outlet receiver from the remote, or if your outlets are unresponsive, you can reset them:
- Wepu ihe nnabata n'ime oghere ọkụ.
- Pịa ma jide bọtịnụ ON/ Gbanyụọ dị na nnata ọpụpụ.
- While still holding the button, plug the outlet receiver back into a power socket and wait to see the indicator flash.
- Mgbe egosi kwụsịrị na-egbuke egbuke, ị nwere ike hapụ bọtịnụ ahụ, ma usoro nrụpụta agwụla.
- You may program the outlet again after resetting.
7. Nlekọta
- Nhicha: Disconnect from power before cleaning. Wipe with a soft, damp akwa . Ejila kemịkalụ siri ike ma ọ bụ ihe mkpocha abrasive.
- Nchekwa: Chekwaa n'ebe dị jụụ, kpọrọ nkụ mgbe ọ naghị eji ya.
- Ngbanwe batrị: Replace the remote control battery when the signal weakens or the remote stops responding.
8. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ọwa anaghị azaghachi ihe dị n'ime ya. | Remote battery is dead or weak. | Replace the 12V 23A battery in the remote. |
| Outlet and remote are not paired. | Follow the "Pairing Receiver to Transmitter" instructions in Section 6.2. | |
| Distance between remote and outlet is too far or obstructed. | Reduce the distance or remove obstructions. The maximum range is 100ft line-of-sight. | |
| Outlet does not power on manually. | No power to the wall receptacle. | Check the circuit breaker or test the wall receptacle with another device. |
| Ibu ibu ma ọ bụ obere sekit. | Unplug devices, check for damage, and ensure total wattage anaghị agafe 1875W. |
9. Nkọwapụta
- Nọmba nlereanya: U151R-1-1
- Ọdụdọ Eletriki: 125V, 15A/1875W Resistive, 10A/1250W Tungsten, 1/2HP
- Njikọta: Ugboro ugboro Redio (RF)
- Oke ikuku: Ruo mita 100 (n'elu ala)
- Ụlọ ahịa: Dual 3-Prong Grounded Outlets
- Ogologo eriri: 6 sentimita asatọ
- Asambodo: ETL edepụtara
- Akụkụ: Ihe dị ka sentimita 3.11 x 2.95 x 1.57 (isi ihe)
- Agba: Nwa
10. Akwụkwọ ikike na nkwado
For warranty information or technical support, please contact HBN customer service. Refer to the product packaging or the official HBN websaịtị maka nkọwa kọntaktị.
Onye nrụpụta: HBN
