1. Okwu mmalite
This manual provides essential information for the safe and effective operation, assembly, and maintenance of your Einhell TC-TS 2025/2 U Bench-type Circular Saw. This powerful tool is designed for precise cutting of solid wood, wood fiberboard, and similar materials. Please read this manual thoroughly before initial use and keep it for future reference.
2. Ozi nchekwa
Na-agbaso ihe ndị a mgbe niile iji gbochie mmerụ ahụ na mmebi nke ngwaọrụ ahụ:
- Gụọ akwụkwọ ntuziaka a: Familiarize yourself with all controls, adjustments, and operating procedures before use.
- Ngwa nchekwa nkeonwe (PPE): Always wear safety glasses, hearing protection, and a dust mask. Gloves are recommended for handling rough materials, but avoid loose clothing or jewelry that could get caught in moving parts.
- Mpaghara ọrụ: Ensure your work area is clean, well-lit, and free of clutter. Keep children and bystanders away.
- Njikọ ike: Connect the saw to a properly grounded power outlet. Do not use in damp ma ọ bụ ọnọdụ mmiri.
- Nchekwa agụba: Hụ na mma e ji akwọ osisi dị nkọ, dị ọcha, ma tinye ya nke ọma. Ejila mma e ji akwọ osisi rụọ ọrụ ma ọ bụrụ na ọ dịghị ihe nchekwa mma e tinyere n'ebe ahụ.
- Ijikwa ihe: Always use a push stick or push block when feeding small workpieces or when your hands are close to the blade. Never reach over the blade.
- Nkwụsi ike: Ensure the saw is stable and securely placed on a level surface before operation.
- Kpupu mgbe ejighi ya: Disconnect the saw from the power supply before making adjustments, changing blades, or performing maintenance.
3. Ihe mejupụtaraview
Understanding the main components of your circular saw is crucial for safe and effective operation.
Foto 3.1: N'ozuzu view of the Einhell TC-TS 2025/2 U Bench-type Circular Saw, showing the main table, blade, and stand.
Foto 3.2: A user operating the circular saw, demonstrating typical usage for cutting wood planks.
Foto 3.3: Close-up of the adjustment wheel for controlling the saw blade's height and angle.
Foto 3.4: Detail of the saw blade guard and the flexible hose for dust extraction, showing height and angle adjustment indicators.
Foto 3.5: View of the dust extraction system, including the hose connecting to the saw blade area and the main collection port.
Foto 3.6: Close-up of the parallel stop with its integrated measurement scale for accurate longitudinal cuts.
4. Nhazi
Follow these steps for initial assembly and setup of your circular saw:
- Iwepu: Jiri nlezianya wepụ ihe niile dị na ngwugwu ahụ. Lelee ma ọ bụrụ na e mebiri emebi ma ọ bụ na-efu efu.
- Chịkọta Frame Base: Connect the frame components according to the diagrams provided in the separate assembly guide. Ensure all bolts are securely tightened.
- Mount the Saw Unit: Place the main saw unit onto the assembled base frame. Secure it using the provided fasteners.
- Install Saw Blade: If the blade is not pre-installed, carefully mount the 250mm carbide-tipped precision saw blade, ensuring the rotation direction matches the arrow on the saw. Use the appropriate tools for tightening the blade nut.
- Attach Blade Guard and Dust Extraction: Secure the transparent blade guard over the saw blade. Connect the dust extraction hose to the guard and the main dust port on the saw unit.
- Install Parallel and Angle Stops: Attach the parallel stop to the table and ensure it slides smoothly. Position the angle stop in its designated slot.
- Mgbatị Tebụl: If desired, attach the left and right table extensions to expand the working surface for larger workpieces.
5. Ntuziaka ọrụ
Proper operation ensures safety and optimal cutting performance.
5.1 Gbanyụọ/ gbanyụọ
- To turn on the saw, press the green 'ON' button.
- To turn off the saw, press the red 'OFF' button. The saw will stop quickly.
5.2 Adjusting Blade Height and Angle
The saw blade's height and angle can be adjusted using a single hand manoeuvre.
- Ndozi elu: Rotate the adjustment wheel to raise or lower the blade. For optimal cutting, the blade should extend slightly above the workpiece.
- Ndozi akụkụ: Tilt the saw blade to the desired angle (up to 45°) for miter cuts. The maximum cutting height at 90° is 85mm, and at 45° is 65mm.
Foto 5.1: Icon indicating a 250mm saw blade diameter.
Foto 5.2: Icon showing maximum cutting depth of 85mm at a 90-degree angle.
Foto 5.3: Icon showing maximum cutting depth of 65mm at a 45-degree angle.
5.3 Using the Parallel Stop
The parallel stop is used for precise longitudinal cuts (ripping).
- Position the parallel stop to the desired width using the measurement scale on the table.
- Securely lock the parallel stop in place before starting the cut.
- Feed the workpiece steadily against the parallel stop and into the blade.
5.4 Using the Angle Stop
The angle stop allows for accurate miter cuts.
- Insert the angle stop into the T-slot on the table.
- Adjust the angle stop to the required angle (up to +/- 60°).
- Hold the workpiece firmly against the angle stop and feed it through the blade.
5.5 Mwepụta uzuzu
For a cleaner work environment and improved visibility, connect a suitable vacuum cleaner to the dust extraction port.
6. Nlekọta
Regular maintenance ensures the longevity and safe operation of your saw.
- Nhicha: After each use, unplug the saw and remove sawdust and debris from the table, blade guard, and motor housing using a brush or vacuum. Do not use solvents.
- Nlekọta agụba: Inspect the saw blade regularly for sharpness and damage. A dull blade can cause kickback and poor cuts. Replace worn or damaged blades promptly.
- mmanu mmanu: Na-ete mmanụ mgbe ụfọdụ n'akụkụ ndị na-agagharị dịka egosiri na ntuziaka ọrụ zuru ezu (ọ bụrụ na ọ dị mkpa).
- Nyocha eriri: Check the power cord for any signs of damage or fraying. Replace immediately if damaged.
- Guard Functionality: Ensure all safety guards move freely and return to their proper positions.
7. Nchọpụta nsogbu
Akụkụ a na-ekwu maka nsogbu ndị ị nwere ike izute.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Saw anaghị amalite | Enweghị ọkụ ọkụ; mgba ọkụ na-ezighi ezi; oke moto. | Check power connection and circuit breaker; contact service if switch is faulty; allow motor to cool. |
| Blade not cutting cleanly / burning wood | Dull blade; incorrect blade for material; improper feed rate. | Replace or sharpen blade; use appropriate blade type; adjust feed rate. |
| Oke ịma jijiji | agụba tọgbọrọ cha; agụba mebiri emebi; ntọala ejighị n'aka. | Tighten blade nut; replace damaged blade; ensure saw is on a stable surface. |
| Mwepụ uzuzu na-adịghị mma | Clogged hose/port; vacuum not powerful enough. | Clear blockages; use a more powerful dust extractor. |
8. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Nlereanya | TC-TS 2025/2 U |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Wattage | 2000 W |
| Voltage | 230 V |
| Ahụhụ dayameta agụba | 250 mm |
| Max. Cutting Height at 90° | 85 mm |
| Max. Cutting Height at 45° | 65 mm |
| Angle Stop Adjustment | +/- 60 Celsius |
| Akụkụ ngwaahịa (L x W x H) | 113.5 x 89.6 x 87 cm |
| Ibu Ibu | 19.2 n'arọ |
9. Akwụkwọ ikike na nkwado
Einhell Power Tools come with a 2-year warranty as standard. An additional 1-year warranty is available upon registration of your product. To activate the additional services, Einhell products must be registered on our websaịtị n'ime 30 ụbọchị ịzụrụ.
For customer service and support, please contact the helpline at: 0151 649 1500.
For more information and to register your product, please visit the official Einhell websaịtị.
