1. Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of your APS iArmor Nerf Bars. Designed for durability and functionality, these running boards offer enhanced vehicle access and rocker panel protection. Please read this manual thoroughly before installation and use.
Figure 1: APS iArmor Nerf Bars (Model IA-77270712)
2. Akụrụngwa Ngwaahịa
- Nchedo siri ike: Dual girder system protects rocker panels from obstacles and impacts.
- Enhanced Access: 6.5-inch wide surface provides a sturdy and comfortable step into your truck.
- Ihe owuwu na-adịgide adịgide: Made from 304 Stainless Steel with a matte black powder-coated finish for rust resistance and UV protection.
- Ike dị elu: Na-akwado ruo 500 lbs.
- Nhazi Pụrụ Iche: Square tube design with slotted pocket step pads for an aggressive off-road aesthetic.
- Ndabara nke Ụgbọala: Compatible with Chevy Silverado GMC Sierra 1500 2007-2018 Crew Cab & 2500 3500 HD 2019 Crew Cab (Excludes 2007 Classic models).
3. Ntọala na nwụnye
Installation of the APS iArmor Nerf Bars is designed to be straightforward. All necessary brackets and hardware are included with your purchase. For detailed, step-by-step instructions, please refer to the official Installation Manual PDF provided by APS.
Ihe ndị dị mkpa:
- Ensure your vehicle is parked on a level surface and the engine is off.
- Verify vehicle compatibility. These nerf bars are specifically designed for Crew Cab models of Chevy Silverado and GMC Sierra within the specified years.
- It is recommended to have a second person assist during installation to safely position and secure the nerf bars.
Figure 2: Vehicle Compatibility Guide - Crew Cab models are compatible.
Figure 3: Easy Installation with included mounting hardware.
For the official installation guide, please refer to the Akwụkwọ ntuziaka nwụnye (PDF).
4. Ntuziaka ọrụ
The APS iArmor Nerf Bars serve as a convenient and secure step for entering and exiting your truck. Their robust design ensures stability and safety during use.
- Na-aga n'ihu: Place your foot firmly on the slotted step pad. The 6.5-inch width provides ample surface area for secure footing.
- Ike ibu: The nerf bars are engineered to support up to 500 lbs. Do not exceed this weight limit.
- Nchekwa: Always maintain three points of contact (two hands and one foot, or one hand and two feet) when entering or exiting your vehicle.
Figure 4: Demonstrating the comfortable step-on feeling and 500 lbs weight capacity.
5. Nlekọta
To ensure the longevity and appearance of your APS iArmor Nerf Bars, regular maintenance is recommended.
- Nhicha: The matte black powder-coated finish is designed for easy cleaning. Use mild soap and water with a soft cloth or sponge. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Nyocha: Periodically inspect all mounting hardware for tightness. Re-tighten any loose bolts to ensure the nerf bars remain securely attached to your vehicle.
- Nguzogide corrosion: The stainless steel construction and powder coating provide excellent resistance to rust and corrosion. However, regular cleaning, especially after exposure to road salt or harsh environmental conditions, will help maintain their condition.
Figure 5: Material composition and protective coatings for durability.
6. Nchọpụta nsogbu
This section addresses common issues you might encounter with your APS iArmor Nerf Bars.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Nerf bars feel loose or unstable. | Mounting hardware is not sufficiently tightened. | Inspect all mounting bolts and brackets. Re-tighten them according to the torque specifications in the installation manual. |
| Unusual noises (rattling, squeaking) from the nerf bars. | Loose hardware or contact with other vehicle components. | Check all mounting points for tightness. Ensure no part of the nerf bar is rubbing against the vehicle's frame or body. |
| Surface finish appears dull or discolored. | Accumulation of dirt, grime, or exposure to harsh chemicals. | Clean the nerf bars thoroughly with mild soap and water. Avoid using abrasive cleaning tools or strong chemical solvents. |
7. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | APS |
| Aha Nlereanya | iArmor |
| Nọmba nlereanya | IA-77270712 |
| Ihe onwunwe | 304 Stainless Steel (Nerf Bars) + Steel (Brackets) |
| Emecha mpụta | Mkpuchi ntụ ntụ ojii nke Matte Black |
| Agba | SS Black |
| Akụkụ ihe (L x W x H) | 87 x 6.5 x 6 sentimita asatọ |
| Ibu Ibu | 51.6 pound |
| Ikike ibu ibu | 500 pound |
| Servicedị Ọrụ hicgbọ | Ụgbọ ala |
| UPC | 647297174221 |
| Ndakọrịta | Chevy Silverado GMC Sierra 1500 2007-2018 Crew Cab & 2500 3500 HD 2019 Crew Cab (Exclude 07 Classic) |
8. Akwụkwọ ikike Ozi
APS provides a Akwụkwọ ikike afọ 5 nwere oke against manufacturing defects for the iArmor Nerf Bars. This warranty covers defects in materials and workmanship under normal use and service.
For warranty claims or further details, please retain your proof of purchase and contact APS customer support.
9. Nkwado ndị ahịa
Should you have any questions, require assistance with installation, or need to report an issue, please contact APS customer support.
- Onye nrụpụta: APS
- Storelọ ahịa n'ịntanetị: Gaa leta Ụlọ Ahịa APS dị na Amazon maka ngwaahịa na ozi ndị ọzọ.
- Ihe ndị ọzọ: Onye ọrụ gọọmentị Akwụkwọ ntuziaka nwụnye (PDF) dị maka nbudata.
