APS iArmor 304 Stainless Steel 6.5-inch Nerf Bars / Pocket Steps

1. Okwu mmalite

This manual provides comprehensive instructions for the installation, operation, and maintenance of your APS iArmor 304 Stainless Steel 6.5-inch Nerf Bars / Pocket Steps. These running boards are designed to provide a secure step into your vehicle and offer protection to the rocker panels. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Ozi nchekwa

• Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves.
• Ensure the vehicle is parked on a level surface with the parking brake engaged before beginning installation.
• Never exceed the product's maximum weight capacity of 500 lbs.
• Verify all hardware is securely tightened after installation and periodically check for tightness during regular vehicle maintenance.
• Ọ bụrụ na ị maghị usoro ọ bụla nke usoro nrụnye, kpọtụrụ ọkachamara ruru eru.

3. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

• Set (2) of Side Armor (Nerf Bars / Pocket Steps)
• Mounting Kit (includes all necessary brackets and hardware)

4. Nkọwapụta

5. Ndakọrịta

These APS iArmor Nerf Bars / Pocket Steps are compatible with the following vehicle:

• Jeep Wrangler JL 4-Door models, years 2018-2025 (including 2021-2025 4xe models).

Ihe ndetu dị mkpa: Factory side steps or rock rails must be removed prior to installing these APS iArmor Nerf Bars.

Foto: Compatibility diagram illustrating that the product is suitable for 4-door Jeep Wrangler JL models, not 2-door models.

6. Nwụnye (Ntọala)

The APS iArmor Nerf Bars are designed for straightforward installation using the included brackets and hardware. Professional installation is recommended if you are not familiar with vehicle modifications.

Usoro ntinye n'ozuzu:

1. Nkwadebe: Park the vehicle on a flat, stable surface. Engage the parking brake. If present, remove any existing factory side steps or rock rails.
2. Chọpụta akụrụngwa: Separate the left and right side steps and corresponding mounting brackets.
3. Tinye eriri: Secure the mounting brackets to the vehicle's frame using the provided hardware. Refer to the specific vehicle's mounting points.
4. Mount Nerf Bars: Carefully lift each nerf bar into position and attach it to the installed brackets using the remaining hardware.
5. Hazie na mechie: Adjust the position of the nerf bars for optimal alignment. Once satisfied, securely tighten all bolts and nuts.
6. Nyocha ikpeazụ: Double-check all connections for tightness and ensure the nerf bars are stable and do not wobble.

Foto: A black Jeep Wrangler JL 4-door with the APS iArmor Nerf Bars installed, showcasing the side profile.

Foto: Onye bụbuample of the APS iArmor running boards installed on a vehicle, demonstrating the integrated design.

Nkọwa ihe owuwu:

The iArmor Nerf Bars feature a dual girder system for enhanced protection and a unique square tube design with slotted step pads. The manufacturing process utilizes automatic robot welding for high-quality fabrication and consistent quality control, ensuring durability and a precise fit.

Foto: An industrial robotic arm performing welding, representing the automatic robot welding process used in manufacturing.

7. Ọrụ

These nerf bars serve as both side bars and running boards, providing a stable and wide stepping surface for easier entry and exit from your vehicle. The slotted step pads offer improved grip.

Ntuziaka ojiji:

• Step onto the designated step pads when entering or exiting the vehicle.
• Ensure your footwear has adequate grip, especially in wet or muddy conditions.
• Do not use the nerf bars as a jacking point for the vehicle.
• The maximum weight capacity is 500 lbs. Do not exceed this limit.

Foto: A close-up of a foot stepping onto the running board, illustrating the practical use of the step.

Foto: A visual representation of the dual-tier step design, emphasizing the expanded stepping area for user convenience.

8. Nlekọta

Regular maintenance will help preserve the appearance and functionality of your APS iArmor Nerf Bars.

• Nhicha: Clean the nerf bars regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the matte black powder-coated finish.
• Nyocha: Periodically inspect the nerf bars and all mounting hardware for any signs of damage, corrosion, or looseness. Tighten any loose fasteners immediately.
• Nguzogide nchara: The 304 stainless steel construction and powder-coated finish provide rust resistance and UV protection. However, prolonged exposure to harsh elements or damage to the coating can lead to corrosion. Address any chips or scratches in the finish promptly.

Foto: Ihe dị iche view of the nerf bar's construction, illustrating the stainless steel core protected by pre-treatment, anti-corrosion primer, and a powder-coated finish.

9. Nchọpụta nsogbu

Okwu na azịza ndị nkịtị:

• Okwu: Nerf bars appear to sit too low or expose pinch welds.
• Ngwọta: Ensure all brackets are installed correctly and oriented as per the instructions. Some vehicle designs may inherently show more of the pinch weld than others. Verify that the correct model-specific product was purchased.
• Okwu: Loose fit or rattling.
• Ngwọta: Re-check all mounting hardware for proper tightness. Over time, vibrations can cause fasteners to loosen.
• Okwu: Difficulty aligning the steps.
• Ngwọta: Loosen the mounting bolts slightly to allow for minor adjustments. Once aligned, tighten all bolts securely.

10. Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike:

APS offers a Akwụkwọ ikike afọ 5 nwere oke against manufacturing defects for this product. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

Nkwado ndị ahịa:

For technical assistance, warranty claims, or further inquiries, please contact APS customer support. You can find more information and contact details by visiting the official APS store:

Visit the APS Store on Amazon