ProMaster Dually Charger - USB for Canon LP-E6(N)
Ụdị: 4560
Okwu mmalite
The ProMaster Dually Charger is designed to efficiently charge two Canon LP-E6(N) camera batteries simultaneously. This compact and lightweight charger features a built-in USB-A input cable for convenient power access and an LCD display to monitor charging status. Its intelligent charging technology ensures optimal and safe power delivery, protecting your batteries from overcharge and short-circuiting.
Ọgụgụ 1: N'elu-ala view of the ProMaster Dually Charger, highlighting its compact design and integrated USB cable. The back of the charger displays model information and charging status indicators.
Melite
- Mepee chaja: Carefully remove the ProMaster Dually Charger from its packaging.
- Locate the USB Cable: The charger features a built-in USB-A input cable neatly stored in the base. Gently pull out the USB-A connector.
- Jikọọ na Ike: Insert the USB-A connector into a compatible USB power source. This can be a USB wall adapter (minimum 5V 2.2A recommended), a power bank, a laptop USB port, or a car USB port.
- Fanye batrị: Align your Canon LP-E6(N) batteries with the charging slots on the charger. Insert one or two batteries firmly into the slots. The charger is designed to accommodate two batteries simultaneously.
Figure 2: Illustrates the process of inserting a battery into the charger, demonstrating its portability for use in various environments like a car.
Ntuziaka ọrụ
Usoro nchaji:
Once batteries are inserted and the charger is connected to a power source, the charging process will begin automatically. The intelligent circuitry will detect the battery status and deliver the optimal charging current.
Understanding the LCD Display and Charging Status Indicators:
The ProMaster Dually Charger features an LCD display that provides real-time information about the charging status of your batteries. Additionally, LED indicators on the charger provide a quick visual reference for the charge level:
- 1 Blink: A na-ana batrị ihe ruru 25%.
- 2 Blinks: A na-ana batrị ihe ruru 50%.
- 3 Blinks: A na-ana batrị ihe ruru 75%.
- Ìhè siri ike: A na-ana batrị 100%.
Charging time for two depleted batteries to reach 100% is approximately 4 hours and 30 minutes.
Nlekọta
- Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa mpụta chaja ahụ. Ejila ihe nhicha mmiri ma ọ bụ ihe mgbaze.
- Nchekwa: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the built-in USB cable is neatly stored in its designated slot.
- Ijikwa: Handle the charger with care. Avoid dropping it or subjecting it to strong impacts.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Charger not powering on / No indicator lights |
|
|
| Batrị anaghị achaji |
|
|
| Nchaji adịghị nwayọ |
|
|
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nlereanya | 4560 |
| Batrị dakọtara | Canon LP-E6(N) |
| Ntinye | DC 5 V 2.2 A (Min) via USB-A port |
| Mpụta | DC 8.4 V, 600 MA |
| Charging Time (2 batteries) | Approximately 4 hours 30 minutes (from depleted to 100%) |
| Akụkụ | 3 3/16" x 2 1/4" x 1" (80 mm x 58 mm x 25 mm) |
| Ibu | 2 3/8 oz (67 g) |
| Agba | Nwa |
Safety Precautions and Cautions
- Akwụsịla: Do not attempt to open or disassemble the charger. This can void the warranty and pose a safety risk.
- Avoid Liquids and Flammable Gases: Do not use or store the charger near liquids or flammable gases.
- Eji ime ụlọ naanị: This charger is intended for indoor use only. Avoid exposure to rain or moisture.
- Ikuku ikuku nke ọma: Gbaa mbọ hụ na ikuku ikuku zuru oke gburugburu chaja mgbe ọ na-arụ ọrụ.
- Ụmụaka na anụ ụlọ: Debe chaja ka ụmụaka na anụ ụlọ ghara iru.
