Transformers Generations War for Cybertron: Earthrise Deluxe WFC-E19 Quintesson Allicon Action Figure Instruction Manual

1. Okwu mmalite

This manual provides detailed instructions for the assembly, operation, and care of your Transformers Generations War for Cybertron: Earthrise Deluxe WFC-E19 Quintesson Allicon Action Figure. Please read these instructions carefully before use.

2. Ozi nchekwa

ỊDỌ AKA NA NTỊ: NDỊ NA-ECHICHE - Obere akụkụ. A naghị akwado maka ụmụaka na-erubeghị afọ atọ. A na-atụ aro ka ndị okenye na-elekọta ha n'oge egwuregwu.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• 1x Quintesson Allicon Action Figure
• 1x Spear Accessory
• 1x Red Decoder
• 1x Instructions Manual (this document)

Image: The Transformers Earthrise Quintesson Allicon figure displayed in its retail packaging, showing the robot mode and included spear accessory.

4. Operating Instructions: Transformation

The Quintesson Allicon figure can transform between its robot mode and beast mode in 14 steps. Follow the steps below for a smooth transformation.

4.1. Robot Mode to Beast Mode

1. Remove the spear accessory from the figure's hand.
2. Fold the robot's feet upwards to form the beast mode's rear legs.
3. Rotate the robot's waist 180 degrees.
4. Collapse the robot's chest and head into the body, revealing the beast mode head.
5. Extend the beast mode's jaw and position it.
6. Adjust the robot's arms to form the beast mode's front legs, ensuring the claws are positioned forward.
7. Extend the tail section from the back of the figure.
8. Secure all panels and tabs to lock the figure in beast mode.
9. The spear accessory can be stored or held by the beast mode.

Image: The Quintesson Allicon figure in its robot mode, standing upright and holding its spear accessory.

Image: The Quintesson Allicon figure transformed into its beast mode, resembling an alligator-like creature, holding the spear.

4.2. Beast Mode to Robot Mode

Reverse the steps above to transform the Allicon from beast mode back to robot mode.

4.3. Map and Decoder

Each package includes a piece of the Transformers Universe map and a red decoder. Use the red decoder to reveal hidden paths and details on the map. Collect other Earthrise figures to complete the full map.

Image: A hand holding the included red decoder over a section of the Transformers Universe map, illustrating how to reveal hidden details.

5. Nlekọta

To ensure the longevity of your action figure:

• Keep the figure clean by wiping it with a dry, soft cloth. Avoid harsh chemicals or abrasive materials.
• Debe ihe osise ahụ n'ebe anwụ na-anaghị apụta kpọmkwem na oke okpomọkụ iji gbochie mgbanwe agba ma ọ bụ mmebi ihe.
• Handle joints and moving parts gently during transformation to prevent breakage.

6. Nchọpụta nsogbu

If you encounter issues with your figure, consider the following:

• Njikọ aka siri ike: If joints are stiff, gently work them back and forth. Avoid excessive force. Applying a very small amount of silicone shock oil (not petroleum-based lubricants) to the joint pin can help, but use with extreme caution and sparingly.
• Akụkụ Ndị Na-anaghị Ahazi: Ensure all previous transformation steps are completed correctly. Check for any tabs or pegs that need to be fully inserted into their corresponding slots. Refer to the transformation video for visual guidance.
• Detached Tail Piece: The tail piece is attached via a peg. If it detaches, carefully re-insert the peg into its slot. When rotating the tail, apply pressure at the peg base, not above the metal pin, to prevent damage.
• Ngwa na-efu efu: Verify package contents upon opening. If an accessory is missing, contact customer support.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

For information regarding product warranty or to contact customer support, please visit the official Hasbro website or the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.

Official Transformers Store: Transformers Store on Amazon