Wharfedale Linton Speaker Stands

Okwu mmalite

This manual provides essential instructions for the proper setup, operation, and maintenance of your Wharfedale Linton Speaker Stands. Please read this manual thoroughly before assembly and use to ensure optimal performance and longevity of your product.

Ihe ngwugwu

Before proceeding with assembly, please verify that all components are present:

• 2 x Speaker Stand Frames (Mahogany with Black accents)
• Mounting Hardware (screws, washers)
• Adjustable Spikes/Feet
• Instruction Leaflet (this manual)

Ntọala na Mgbakọ

Follow these steps carefully to assemble your Wharfedale Linton Speaker Stands:

1. Iwepu: Carefully remove all components from the packaging. Retain packaging for future transport if needed.
2. njirimara akụrụngwa: Identify all parts. Ensure you have two top plates, two bottom plates, and the vertical support structures for each stand.
3. Mgbakọ izizi: Attach the vertical supports to the bottom plate using the provided screws. Ensure they are securely fastened but do not overtighten initially.
4. Top Plate Attachment: Secure the top plate to the vertical supports.
5. Mmechi ikpeazụ: Once all parts are loosely assembled, gently tighten all screws to ensure a stable and rigid structure.
6. Attaching Feet/Spikes: Screw the adjustable feet or spikes into the designated holes on the bottom plate. For carpeted surfaces, use the spikes. For hard floors, use the protective pads under the spikes or the rubber feet.

Image: Fully assembled Wharfedale Linton Speaker Stands, ready for speaker placement.

Image: Detail of the stand's base, highlighting the mahogany finish and adjustable feet for leveling.

Ntuziaka ọrụ

These stands are designed specifically for Wharfedale Linton speakers. For optimal acoustic performance and safety, follow these guidelines:

• Nkwanye ọkà okwu: Carefully lift your Wharfedale Linton speakers and place them centrally on the top plate of each stand. Ensure the speakers are stable and do not overhang the edges.
• Nkwanye: Use the adjustable feet/spikes to level the stands on uneven surfaces. This is crucial for stability and sound quality.
• Njikwa USB: Route speaker cables neatly to prevent tripping hazards and maintain a clean aesthetic.
• Nyochaa nkwụsi ike: Periodically check that the stands remain stable and that all screws are tight.

Nlekọta

To keep your speaker stands in excellent condition:

• Nhicha: Wipe surfaces with a soft, dry cloth. For stubborn marks, a slightly damp enwere ike iji akwa mee ihe, na-esote ihicha ozugbo. Zere ihe nhicha ma ọ bụ ihe mgbaze.
• Nlekọta osisi: The mahogany finish can be maintained with furniture polish suitable for wood, applied sparingly as per the polish manufacturer's instructions.
• Nyocha: Regularly inspect the stands for any loose screws or signs of wear. Tighten screws as necessary.

Nchọpụta nsogbu

If you encounter any issues, consider the following:

• Akwụsịghị ike/na-ama jijiji:
  • Gbaa mbọ hụ na ejirila skru mgbakọ niile sie ike.
  • Adjust the leveling feet/spikes to ensure all four points of contact are firmly on the floor.
  • Verify the floor surface is even.
• Akpụkpọ anụ dị n'ala:
  • If using spikes on hard floors, ensure protective pads are used underneath. Consider switching to rubber feet if available.

Nkọwapụta

Ozi akwụkwọ ikike

For detailed warranty information regarding your Wharfedale Linton Speaker Stands, please refer to the official Wharfedale website or contact your authorized dealer. Warranty terms and conditions may vary by region.

Nkwado ndị ahịa

Should you require further assistance or have questions not covered in this manual, please contact Wharfedale customer support:

• Akara: Wharfedale
• Onye nrụpụta: Wharfdale
• Websaịtị: Visit the Wharfedale Store on Amazon (maka ozi ngwaahịa izugbe)
• For direct support, please visit the official Wharfedale global websaịtị.