Lepro HeadLamp Model 320015-2: User Instruction Manual

1. Okwu mmalite

This manual provides essential information for the safe and effective use of your Lepro HeadLamp Model 320015-2. Please read these instructions thoroughly before operation and retain for future reference.

Kedu ihe dị na igbe:

• 2 x Lepro HeadLamps

2. Atụmatụ igodo

• Igwe ọkụ na-egbuke egbuke: Equipped with a powerful XPG2 LED, providing up to 1300 lux illumination and a beam distance of up to 400 feet (120 meters).
• Ụdị ọkụ ọtụtụ: Features 6 distinct lighting modes including spot light (high/low), flood light (high/low), and red light (stay on/flash) for various needs.
• Ihe mkpuchi isi nwere ike idozi: Removable, washable, and elastic headband ensures a comfortable fit for adults and children, and can be worn over hard hats or helmets.
• Ọrụ Ntụda 45°: Ergonomic design allows for a 45-degree adjustable angle, reducing neck strain and ensuring light is directed where needed.
• Na-adịgide adịgide ma na-eguzogide ihu igwe: IPX4 water-resistant rating protects against splashing water from any angle. Impact-resistant construction withstands drops, rain, cold, and heat.
• Nhazi dị arọ: Weighs only 1.94 ounces (without batteries), making it ideal for extended wear during activities like running and hiking.

Foto: Ofeview of Lepro HeadLamps highlighting Cree XP-G2 LEDs, IPX4 resistance, protective coating, 6 lighting modes, and adjustable head.

3. Nhazi

3.1 Ntinye batrị

The Lepro HeadLamp requires 3 AAA batteries (not included). Follow these steps to install the batteries:

1. Chọta ebe batrị dị n'azụ isi ahụamp otu.
2. Jiri nwayọ mepee mkpuchi nke ebe batrị ahụ.
3. Tinye batrị AAA atọ, hụ na polarity ziri ezi (+/-) dịka egosiri n'ime ngalaba ahụ.
4. Mechie mkpuchi nke batrị batrị nke ọma ruo mgbe ọ pịrị na ya.

3.2 Ịgbanwe eriri isi

The elastic headband is adjustable to fit various head sizes, from children to adults, and can accommodate hard hats or helmets.

1. Debe isi isiamp n'isi gi.
2. Use the adjustable buckles on the sides of the headband to tighten or loosen it until a comfortable and secure fit is achieved.

Image: Illustrates the versatility of the adjustable headband, fitting various users including adults, children, and over a hard hat.

4. Ntuziaka ọrụ

Your Lepro HeadLamp features two buttons on the top for controlling the lighting modes.

Foto: nso nso view nke isiamp's top, indicating the 'General Switch' for ON/OFF and output selection, and the 'Functional Switch' for red/green/strobe modes.

4.1 Power On/Off and White Light Modes

Jiri ihe Ngbanwe General (typically the larger button) to control the white light modes:

1. Press once for Spot Light - Low.
2. Pịa ọzọ maka Spot Light - High.
3. Press a third time for Flood Light - Low.
4. Press a fourth time for Flood Light - High.
5. Press a fifth time to turn the headlamp Gbanyụọ.

4.2 Red Light Modes

Jiri ihe Functional Switch (typically the smaller button) to access the red light modes:

1. Press once for Red Light - Stay On.
2. Pịa ọzọ maka Red Light - Flash (emergency signal).
3. Press a third time to turn the red light OFF.

Image: Visual representation of the six available lighting modes: Spot Light (Low/High), Flood Light (Low/High), and Red Light (Stay On/Flash).

4.3 Tilt Ọrụ

Isi okwuamp unit can be tilted up to 45 degrees to adjust the beam direction without needing to reposition your head. Simply grasp the headlamp unit and gently pivot it to the desired angle.

Foto: Zuru ezu view nke isiamp's adjustable headband, 45-degree tilt mechanism, and shockproof rubber coating.

5. Nlekọta

5.1 Nhicha

Iji hichaa isi isiamp, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents. The headband is removable and washable.

5.2 Nchekwa

When not in use for extended periods, remove the batteries to prevent leakage and store the headlamp n'ebe dị jụụ, kpọrọ nkụ.

5.3 Mmiri Nguzogide

Isi okwuamp is IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is not designed for submersion in water.

Image: A person cycling in the rain demonstrates the IPX4 water resistance of the Lepro HeadLamp, suitable for various weather conditions.

6. Nchọpụta nsogbu

6.1 Light Not Turning On

• Hụ na etinyere batrị nke ọma na polarity kwesịrị ekwesị.
• Jiri ndị ọhụrụ dochie batrị ochie.
• Lelee maka mmebi ọ bụla a na-ahụ anya na ngalaba batrị ma ọ bụ kọntaktị.

6.2 Dim Light Output

• Batteries may be low. Replace with fresh batteries.
• Ensure the lens is clean and free from dirt or obstructions.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

8.1 Ozi akwụkwọ ikike

This product comes with a manufacturer and seller combination warranty. For specific details regarding warranty coverage and duration, please refer to the documentation included with your purchase or contact Lepro customer service.

8.2 Nkwado ndị ahịa

For any questions, technical assistance, or support needs, please visit the official Lepro websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha. Enwere ike ịchọta ozi kọntaktị na nkwakọ ngwaahịa ngwaahịa ma ọ bụ onye ọrụ nke ika ahụ websaịtị.