Ntuziaka Onye Ọrụ OMNITRONIC PM-322P 3-Channel DJ Mixer

1. Okwu mmalite

This manual provides essential information for the safe and efficient operation of your OMNITRONIC PM-322P 3-Channel DJ Mixer. Please read these instructions thoroughly before using the device to ensure proper functionality and to prevent damage.

The OMNITRONIC PM-322P is a robust and versatile 3-channel DJ mixer designed for various audio mixing applications, featuring integrated Bluetooth connectivity and a USB MP3 player.

Foto 1: N'akuku view of the OMNITRONIC PM-322P DJ Mixer, showcasing its compact design and accessible controls.

2. Ntuziaka nchekwa

• Gụọ ntuziaka niile tupu ị rụọ ọrụ ngwaọrụ.
• Debe akwụkwọ ntuziaka a maka ntụnye aka n'ọdịnihu.
• Ewepụla ngwaọrụ ahụ na mmiri ozuzo ma ọ bụ mmiri.
• Gbaa mbọ hụ na ikuku ikuku kwesịrị ekwesị; egbochila oghere ikuku.
• Only connect to a grounded power outlet with the specified voltage (240 volts).
• Emeghela ngwaọrụ casing; zigara ndị ọrụ ruru eru ọrụ niile.
• Zere idobe ngwaọrụ n'akụkụ ebe okpomọkụ ma ọ bụ na ìhè anyanwụ.
• Jiri akwa kpọrọ nkụ hichaa naanị.

3. Atụmatụ igodo

• Ọwa ntinye 3: Each channel features gain control, a 3-band equalizer (High, Mid, Low), a Cue button for pre-listening, and a smooth channel fader.
• Integrated Bluetooth Audio Streaming: Seamlessly stream music wirelessly from your Bluetooth-enabled portable devices directly to the mixer.
• DJ Microphone Channel: Dedicated microphone input with independent volume control and a 2-band equalizer for vocal adjustments.
• MP3 Player with USB Port: Kpọọ ọdịyo files directly from a USB storage device, with track information displayed on a clear blue LCD.
• Nrụpụta siri ike: Designed for durability and reliable performance.

4. Njikwa na Njikọ

4.1 Njikwa ihu ihu

Foto 2: N'elu view of the OMNITRONIC PM-322P DJ Mixer, highlighting the main control surface.

1. Ọdụ ụgbọ mmiri USB: For connecting USB storage devices to the integrated MP3 player.
2. MP3/Bluetooth Module: Includes LCD display, playback controls (Play/Stop, Skip), and Pairing button for Bluetooth.
3. Channel Gain Controls (CH 1-3): Hazie ọkwa ntinye maka ọwa ọ bụla.
4. 3-Band Equalizer (High, Mid, Low): Tone controls for each channel.
5. Cue Buttons (CH 1-3): Activates pre-listening for the respective channel through headphones.
6. Channel Faders (CH 1-3): Adjust the volume level of each channel in the mix.
7. Microphone Level Control (MIC LEVEL): Na-edozi olu igwe okwu ejikọrọ.
8. Microphone 2-Band Equalizer (MIC HIGH, MIC LOW): Njikwa ụda maka ntinye igwe okwu.
9. X-Fader Reverse Switch: Reverses the direction of the crossfader.
10. X-Fader Curve Control: Adjusts the crossfader curve from sharp to smooth.
11. Crossfader (CH 2/CH 3): Blends between channels 2 and 3.
12. Master Level Control: Na-edozi olu mmepụta n'ozuzu ya.
13. Cue Level Control: Na-edozi olu nke mmepụta ekweisi.
14. Cue Mix/PGM Control: Blends between the Cued signal and the Program (Master) signal in the headphones.
15. Mita Ọkwa LED: Visual indication of output levels.
16. Headphone Output (1/4" TRS): For connecting headphones for monitoring.

4.2 Njikọ azụ azụ

Foto 3: Rear panel of the OMNITRONIC PM-322P DJ Mixer, showing all input and output ports.

1. Mgbanwe ọkụ (Gbanye/ Gbanyụọ): Gbanyụọ ma ọ bụ gbanyụọ igwekota.
2. Ọrụ NA: Power input for the included power cable (100-240V AC, 50/60Hz).
3. Ọdụ Ala (GND): For connecting a turntable ground wire.
4. Channel 3 Inputs (LINE 5/PH 2, LINE 6): RCA inputs for line-level devices (CD players, media players) and phono-level devices (turntables).
5. Channel 2 Inputs (LINE 3/PH 1, LINE 4): RCA inputs for line-level devices and phono-level devices.
6. Channel 1 Inputs (PLAYER/LINE 1, LINE 2): RCA inputs for line-level devices.
7. Master Output (XLR, RCA): Balanced XLR and unbalanced RCA outputs for connecting to a power amplifier ma ọ bụ ndị na-ekwu okwu na-arụ ọrụ.
8. Ntinye igweokwu (XLR): Ntinye XLR dabara adaba maka ijikọ igwe okwu dị ike.

5. Nhazi

1. Njikọ ike: Connect the provided power cable to the AC IN socket on the rear panel and then to a suitable grounded power outlet (240V).
2. Njikọ mmepụta: Connect the MASTER OUTPUT (XLR or RCA) to your amplifier or active speaker system.
3. Ngwa ntinye:
   • Connect turntables to the PHONO inputs (CH 2 or CH 3) and ensure the PH/LINE switch is set to PH. Connect the turntable's ground wire to the GND terminal.
   • Connect CD players, media players, or other line-level devices to the LINE inputs (CH 1, CH 2, or CH 3). Ensure the PH/LINE switch is set to LINE for channels 2 and 3.
   • Connect a microphone to the XLR MIC input on the rear panel.
4. Igwe ekweisi: Connect your headphones to the 1/4" TRS HEADPHONE output on the front panel.
5. Ntọala mbụ: Before powering on, ensure all channel faders are down, gain controls are at minimum, and the Master Level is at minimum.
6. Ike Na: Flip the POWER switch on the rear panel to the ON position.

6. Ọrụ

6.1 Playing Audio from Input Channels

1. Select the desired input source (LINE or PHONO) using the switch on the rear panel for Channels 2 and 3. Channel 1 is LINE only.
2. Start playback on your connected audio source (turntable, CD player).
3. Slowly increase the GAIN control for the selected channel until the LED level meter shows a strong signal without clipping (red LEDs).
4. Adjust the 3-band EQ (HIGH, MID, LOW) to shape the sound of the channel.
5. Raise the channel fader to bring the audio into the main mix.
6. Adjust the MASTER LEVEL control to set the overall output volume.
7. Use the CUE button to pre-listen to a channel through your headphones before fading it into the mix. Adjust CUE LEVEL and CUE MIX/PGM as needed.

6.2 Using the MP3 Player (USB)

1. Insert a USB storage device (formatted as FAT32) containing MP3 files n'ọdụ ụgbọ mmiri USB.
2. The LCD display will show track information.
3. Use the PLAY/STOP button to start or pause playback.
4. Use the SKIP buttons (<< / >>) to navigate between tracks.
5. The MP3 player typically routes to Channel 1. Adjust Channel 1's GAIN, EQ, and FADER controls as described above.

Ngụkọta ọdịyo Bluetooth 6.3

1. Press the PAIRING button on the MP3/Bluetooth module. The Bluetooth indicator will flash, indicating it's in pairing mode.
2. On your Bluetooth-enabled device (smartphone, tablet), search for available Bluetooth devices and select "OMNITRONIC PM-322P".
3. Once paired, the Bluetooth indicator will glow steadily.
4. Start playing audio on your connected device. The Bluetooth audio will route to Channel 1.
5. Adjust Channel 1's GAIN, EQ, and FADER controls to mix the Bluetooth audio.

6.4 Iji Igwe Okwu

1. Connect a dynamic microphone to the XLR MIC input on the rear panel.
2. Speak into the microphone and slowly increase the MIC LEVEL control until the desired volume is achieved without distortion.
3. Use the MIC HIGH and MIC LOW controls to adjust the tone of your voice.

7. Nlekọta

• Nhicha: Disconnect the device from power before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
• Nchekwa: When not in use for extended periods, store the mixer in a dry, dust-free environment.
• Ọrụ: Enweghị akụkụ na-arụ ọrụ n'ime. Zigara ndị ọrụ ruru eru ọrụ niile.

8. Nchọpụta nsogbu

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

For warranty information and technical support, please contact the manufacturer, Steinigke Showtechnic GmbH, or your authorized dealer. Keep your proof of purchase for any warranty claims.

For further assistance, please visit the official OMNITRONIC website or consult your local distributor.