Akwụkwọ ntuziaka+

Lindy 38236

Lindy 4 Port HDMI 2.0 18G Splitter (Model 38236) Instruction Manual

Ụdị: 38236

1. Okwu mmalite

The Lindy 4 Port HDMI 2.0 18G Splitter is designed to distribute a single HDMI 2.0 source signal to up to four HDMI displays simultaneously. It supports resolutions up to 4K@60Hz 4:4:4 8bit, High-Dynamic Range (HDR), and HDCP 2.2, ensuring compatibility with a wide range of modern video content and devices. This device is suitable for applications requiring the display of high-quality video content across multiple screens.

Atụmatụ gụnyere:

  • Splits one HDMI 2.0 source to four HDMI displays.
  • Supports resolutions up to 4K@60Hz 4:4:4.
  • Compatible with HDR content.
  • HDCP 2.2 support for content protection.
  • EDID management for optimal display compatibility.

2. Ozi nchekwa

Please read all instructions carefully before operating this device. Retain this manual for future reference.

  • Ewepụla ngwaọrụ ahụ na mmiri ma ọ bụ mmiri.
  • Anwala imepe ma ọ bụ rụzie ngwaọrụ ahụ. Nye ndị ọrụ ruru eru ọrụ niile.
  • Gbaa mbọ hụ na ikuku ikuku dị mma iji gbochie ikpo oke ọkụ.
  • Jiri naanị ihe nkwụnye ọkụ enyere.
  • Debe ngwaọrụ ahụ pụọ na isi mmalite okpomọkụ yana ìhè anyanwụ kpọmkwem.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

  • Lindy 4 Port HDMI 2.0 18G Splitter
  • Ihe nkwụnye ọkụ
  • Akwụkwọ ntuziaka

4. Ngwaahịa gafereview

4.1 Ogwe ihu

Front panel of the Lindy 4 Port HDMI 2.0 18G Splitter

Image: Front panel of the Lindy 4 Port HDMI 2.0 18G Splitter, showing Power LED, Input LED, Output LEDs (OUT1-OUT4), Service port, and EDID switch.

  • Ike Ikanam: Na-enwu mgbe ngwaọrụ ahụ gbanyere ọkụ.
  • N'ime LED: Illuminates when an HDMI input signal is detected.
  • OUT1-OUT4 LEDs: Illuminate when an HDMI output signal is detected on the corresponding port.
  • OZI: USB port for firmware updates (for manufacturer use only).
  • Ngbanwe EDID: Used to manage EDID settings.
    • STD: Standard EDID (1080p 2ch audio).
    • TV: Copies EDID from the display connected to Output 1.

4.2 Ogwe azụ

Rear panel of the Lindy 4 Port HDMI 2.0 18G Splitter

Image: Rear panel of the Lindy 4 Port HDMI 2.0 18G Splitter, showing HDMI OUT 1-4 ports, HDMI IN port, and DC 5V power input.

  • HDMI NA: Connects to the HDMI source device (e.g., Blu-ray player, game console, PC).
  • HDMI si 1-4: Connects to HDMI displays (e.g., TV, monitor, projector).
  • DC 5V: Power input for the included power adapter.

5. Ntọala na nwụnye

  1. Gbanyụọ ngwaọrụ: Ensure all HDMI source devices and displays are powered off before making connections.
  2. Jikọọ HDMI Isi mmalite: Connect an HDMI cable from your source device (e.g., media player, game console) to the HDMI n'ime port on the splitter.
  3. Jikọọ HDMI ngosi: Connect HDMI cables from the HDMI pụọ 1-4 ports on the splitter to your respective HDMI displays.
  4. Set EDID: Before powering on, set the EDID switch according to your requirements:
    • For standard 1080p 2ch audio output, set the switch to STD.
    • To copy the EDID from the display connected to Output 1, set the switch to TV. This ensures the splitter communicates the optimal resolution and audio format supported by your primary display to the source.
  5. Njikọ Ike: Jikọọ ihe nkwụnye ike DC 5V nke etinyere na ya na ihe nkwụnye ike DC 5V nke etinyere na ya DC 5V port on the splitter, then plug the adapter into a suitable power outlet. The POWER LED on the front panel will illuminate.
  6. Ike Na Ngwaọrụ: Power on your HDMI displays, then power on your HDMI source device. The IN and OUT LEDs should illuminate, indicating active connections.

The splitter will automatically detect the input signal and distribute it to all connected displays.

6. Ntuziaka ọrụ

Once connected and powered on, the Lindy 4 Port HDMI 2.0 18G Splitter operates automatically. The input signal will be duplicated and sent to all four connected displays.

6.1 Njikwa EDID

The EDID (Extended Display Identification Data) switch allows you to control how the splitter communicates with the source device regarding supported resolutions and audio formats. This is crucial for ensuring compatibility and optimal display quality.

  • Ụdị STD: Provides a standard 1080p resolution with 2-channel audio. This setting is useful if you encounter compatibility issues with specific displays or sources, or if you require a consistent output resolution across all displays.
  • Ụdị TV: The splitter reads the EDID information from the display connected to HDMI pụọ 1 and relays it to the source device. This allows the source to output the highest common resolution and audio format supported by your primary display. If the primary display is disconnected or powered off, the splitter may revert to a default EDID or use the EDID of the next active display.

It is recommended to adjust the EDID switch while the source and displays are connected but before the source outputs video, or to power cycle the source after changing the EDID setting for the changes to take effect.

7. Nlekọta

  • Nhicha: Disconnect the power adapter before cleaning. Use a soft, dry, lint-free cloth to wipe the exterior of the device. Do not use liquid cleaners or aerosols.
  • Nchekwa: If storing the device for an extended period, disconnect all cables and store it in a cool, dry place away from direct sunlight.
  • Igwe ikuku: Ensure the device has adequate ventilation and that its vents are not blocked.

8. Nchọpụta nsogbu

NsogbuIhe nwere ike imeNgwọta
No picture on display(s).
  • Njikọ eriri adịghị atọ ụtọ.
  • Incorrect EDID setting.
  • Source or display not powered on.
  • Mkpebi/ọnụego ume ọhụrụ na-ekwekọghị ekwekọ.
  • Eriri HDMI adịghị mma.
  • Check all HDMI cable connections and ensure they are secure.
  • Try switching the EDID to "STD" mode.
  • Ensure all connected devices (source, displays) are powered on.
  • Adjust the source device's resolution to a lower setting (e.g., 1080p).
  • Test with a different, known-good HDMI cable.
Mgbaàmà ma ọ bụ mmetụ aka na-akwụsị akwụsị.
  • Long or low-quality HDMI cables.
  • HDCP compatibility issue.
  • Okwu ọkọnọ ike.
  • Use shorter, high-quality HDMI 2.0 certified cables.
  • Ensure all devices support HDCP 2.2.
  • Verify the power adapter is securely connected and functioning correctly.
Enweghị ọdịyo.
  • Ntọala ọdịyo na isi mmalite/ngosipụta.
  • EDID setting.
  • Lelee ntọala mmepụta ọdịyo na ngwaọrụ isi mmalite gị na ntọala ntinye na ngosipụta gị.
  • Try switching the EDID to "STD" mode, which defaults to 2-channel audio.

9. Nkọwapụta

Nọmba nlereanya38236
HDMI StandardHDMI 2.0
Bandwit18Gbps
Mkpebi Max4K@60Hz 4:4:4 8bit
Nkwado HDCPHDCP 2.2
Nkwado HDREe
Njikwa EDIDSTD / TV Copy
Ntinye ọdụ ụgbọ mmiri1 x HDMI Ụdị Nwanyị A
Ọdụ ụgbọ mmiri mmepụta4 x HDMI Ụdị Nwanyị A
Ntinye ikeDC 5V
Akụkụ (LxWxH)7.48 x 5.91 x 2.36 sentimita asatọ
Ibu Ibu13.2 ounce (gram 373)
Okpomọkụ na-arụ ọrụ0°C ruo 40°C (32°F ruo 104°F)
Okpomọkụ nchekwa-20°C ruo 60°C (-4°F ruo 140°F)
iru mmiri20-90% RH (na-abụghị condensing)
nnabataRoHS

Mara: Nkọwapụta ga-agbanwe na-enweghị ọkwa.

10. Akwụkwọ ikike na nkwado

Lindy provides a manufacturer's warranty for this product. Please refer to the official Lindy website or your purchase documentation for detailed warranty terms and conditions. For technical support or assistance, please contact Lindy customer service.

EU Spare Part Availability Duration: 1 Year (as per product information).

Maka ozi ndị ọzọ, gaa na Lindy websaịtị.

Akwụkwọ ndị emetụtara - 38236

Tupuview LINDY 3 & 5 Port HDMI 18G Switch User Manual
User manual for the LINDY 3 & 5 Port HDMI 18G Switch, detailing safety instructions, features, installation, certifications, warranty, and recycling information. Supports 4K@60Hz and HDR.
Tupuview LINDY 8 Port HDMI 18G Splitter akwụkwọ ntuziaka
Akwụkwọ ntuziaka onye ọrụ maka LINDY 8 Port HDMI 18G Splitter (Model 38237), na-akọwa nkọwa, nrụnye, ọrụ na ozi nnabata maka ikesa akara HDMI 2.0 18G.
Tupuview LINDY 4 Port HDMI 2.0 18G Splitter with Audio - User Manual
User manual for the LINDY 4 Port HDMI 2.0 18G Splitter with Audio, detailing features, specifications, installation, and operation. Supports 4K@60Hz, HDR, and audio extraction.
Tupuview LINDY 38355: 100m Cat.6 4 Port HDMI 4K60 HDBaseT Splitter Extender User Manual
User manual for the LINDY 38355 100m Cat.6 4 Port HDMI 4K60 HDBaseT Splitter Extender. Details installation, features, specifications, and troubleshooting for this high-performance HDMI extension solution.
Tupuview LINDY HDMI 18G Audio Extractor (Model 38361) User Manual
Official user manual for the LINDY HDMI 18G Audio Extractor (Model 38361), detailing features, specifications, installation, and safety instructions for extracting digital and analog audio from HDMI sources.
Tupuview LINDY 4 × 4 HDMI 4K60 Matrix nwere ntuziaka onye ọrụ nyocha mgbidi vidiyo
Chọgharịa LINDY 4 × 4 HDMI 4K60 Matrix na Vidiyo Wall Scaling (Model 38238). Akwụkwọ ntuziaka onye ọrụ a na-akọwapụta atụmatụ ya, nkọwapụta ya, ntọlite ​​​​ya, arụ ọrụ site na RS-232/LAN, imepụta mgbidi vidiyo, yana nchọpụta nsogbu maka nrụnye AV ọkachamara.