ONKRON G120-BLK Single Monitor Wall Mount Instruction Manual
Model: G120-BLK
Okwu mmalite
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Ozi nchekwa
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- Agafela ikike ịdị arọ kacha nke 17.6 lbs (8 n'arọ).
- This mount is designed for monitors between 13 and 34 inches.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Debe ụmụaka na anụ ụlọ n'oge echichi.
Ihe ngwugwu
Nyochaa na akụrụngwa niile dị tupu ịmalite nrụnye.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- VESA Efere
- Efere mgbidi
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Allen Key (6mm)
- Akwụkwọ ntuziaka
Ntọala na nwụnye
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Ntuziaka vidiyo nwụnye
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Kwụpụ 1: Na-akanye oghere Drill
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Nzọụkwụ 2: Ịwụnye Ugwu
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached and level.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Tụgharịa emegide-klookwaisi for lighter screens (to reduce tension).
- Tụgharịa n'aka elekere for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewna -akasi obi.
- Ndozi elu: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Mgbatị/Nlaghachi azụ: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Gbaa: Adjust the monitor tilt from +90° to -45° to reduce glare and find your preferred viewakụkụ n'akuku.
- Swivel: Swivel the monitor 180° left or right.
- Ntughari: Tụgharịa ihe nleba anya 360° maka ntụgharị ihu ala ma ọ bụ eserese.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Njikwa USB
Jiri sistemụ njikwa eriri agbakwunyere mee ka ebe ọrụ gị dị ọcha.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Foto: nso nso view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Nlekọta
Regular maintenance ensures the longevity and optimal performance of your monitor mount.
- Nhicha: Jiri ihe dị nro hichaa ugwu ahụ, damp akwa . Zere ihe nhicha ma ọ bụ ihe mgbaze.
- Nyocha oge: Lelee skru na njikọ niile iji hụ na ha kwụgidere. Tinyegharịa ọzọ ma ọ dị mkpa.
- Mgbanwe Mmiri Gas: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Nchọpụta nsogbu
Rụtụ aka na ngalaba a maka azịza maka okwu nkịtị.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Monitor sags or does not stay at desired height. | Gas spring tension is too low for the monitor's weight. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | Gas spring tension is too high for the monitor's weight. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Ugwu ahụ na-enwe mmetụta nke enweghị ike ịrụ ọrụ ma ọ bụ na-ama jijiji. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | Joints are too tight. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Nkọwapụta
- Ụdị: G120-BLK
- Ndakọrịta nha ihuenyo: 13-34 sentimita asatọ
- Ike ibu: 2.2 - 17.6 lbs (1 - 8 kg)
- Ndakọrịta VESA: 75x75mm, 100x100mm
- Tilt n'akuku: +90° ruo -45°
- Akụkụ Swivel: 180°
- Ntughari: 360°
- Ndozi elu: 11 sentimita (28 cm)
- Mgbatị aka: 3.5 sentimita (8.9 sentimita) ruo sentimita 13.7 (34.8 sentimita)
- Ihe: Aluminom
- Akụkụ ngwaahịa: 16.34 x 2.28 x 6.61 sentimita (41.5 x 5.8 x 16.8 cm)
- Ibu ihe: 3.96 pound (1.8 n'arọ)
Akwụkwọ ikike na nkwado
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON websaịtị.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Ozi mkpọtụrụ: Lelee ONKRON site na usoro webngwugwu saịtị ma ọ bụ ngwaahịa maka nkọwa kọntaktị kachasị ọhụrụ.
