Nobsound T3 MM Phono Preampna -emegharị ihe

1. Okwu mmalite

The Nobsound T3 is a Moving Magnet (MM) phono preamplifier designed to convert phono signals from a turntable to line-level signals. This device is essential for connecting a turntable to audio systems that lack a dedicated phono input, such as stereo amplifiers or active speakers. It features a volume control to adjust the output level.

Image: The Nobsound T3 phono preamplifier integrated into a home audio setup with a turntable and speakers.

2. Ozi nchekwa

• Hụ na ihe nkwụnye ike voltage dakọtara ọkụ ọkụ mpaghara gị.
• Ewepụla ngwaọrụ ahụ na mmiri ma ọ bụ oke okpomọkụ.
• Avoid disassembling the unit; refer servicing to qualified personnel.
• Place the unit on a stable, flat surface to prevent accidental falls.
• Debe ebe ụmụaka na-apụghị iru.

3. Ihe ngwugwu

• Nobsound T3 MM Phono Preampna -emegharị ihe
• DC 12V ihe nkwụnye ọkụ

Image: The Nobsound T3 phono preamplifier and its included DC 12V power adapter.

4. Ngwaahịa gafereview

The Nobsound T3 features a compact design with essential controls and connections for seamless integration into your audio system.

Ogwe ihu

• Mgbanwe IKE: Toggles the unit on/off. Features a red indicator light when active.
• Mpịakọta olu: Adjusts the output level of the preampna -emegharị ihe.

Ogwe azụ

• GND Terminal: Ground connection for the turntable to reduce hum and noise.
• MM INPUT (R/L): RCA inputs for connecting your Moving Magnet (MM) turntable.
• AUDIO OUTPUT (R/L): RCA outputs for connecting to your amplifier ma ọ bụ ndị na-ekwu okwu na-arụ ọrụ.
• DC 12V: Power input for the included 12V DC adapter.

Foto: Zuru ezu view of the Nobsound T3's front panel (Power switch, Volume knob) and rear panel (GND, MM Input, Audio Output, DC 12V).

5. Nhazi

Follow these steps to connect your Nobsound T3 phono preamplifier to your audio system:

1. Connect Turntable to MM Input: Use RCA cables to connect the audio output of your MM turntable to the MM INPUT (R/L) jacks on the rear panel of the Nobsound T3. Ensure left (white) and right (red) channels are matched.
2. Jikọọ Waya Ala: Attach the ground wire from your turntable to the GND terminal on the Nobsound T3. This helps to minimize hum and noise.
3. Jikọọ na Ampndị na-ekwu okwu: Use another set of RCA cables to connect the AUDIO OUTPUT (R/L) jacks of the Nobsound T3 to an available line-level input (e.g., AUX, CD, LINE IN) on your amplifier or active speakers. Do not connect to a phono input on your amplifier, as this unit already provides phono pre-ampntughari.
4. Njikọ Ike: Plug the DC 12V power adapter into the DC 12V input on the rear panel of the Nobsound T3, then plug the adapter into a power outlet.
5. Ike Na: Pịa IKE switch on the front panel to turn on the unit. The red indicator light will illuminate.

Image: Connection diagram illustrating how to integrate the Nobsound T3 into an audio system.

6. Ntuziaka ọrụ

Once the Nobsound T3 is properly set up, operating it is straightforward:

1. Ensure all connections are secure and the unit is powered on.
2. Start playing a record on your turntable.
3. Hazie nke Mpịakọta knob on the front panel of the Nobsound T3 to achieve the desired output level.
4. Further volume adjustments can be made using your amplifier or active speakers' volume control.

7. Nlekọta

• Jiri ákwà dị nro ma kpọọ nkụ hichaa ihe dị n'ime ya. Ejila ihe nhicha mmiri ma ọ bụ ihe mgbaze.
• Keep the unit free from dust and debris to ensure proper ventilation.
• Periodically check all cable connections for tightness and wear.

8. Nchọpụta nsogbu

Enweghị mpụta ụda

• Ensure the Nobsound T3 is powered on (red indicator light is lit).
• Verify all RCA cables are securely connected to the correct input/output jacks.
• Check the volume level on both the Nobsound T3 and your ampndị na-ekwu okwu n'ọrụ.
• Kwenye gị amplifier/active speakers are set to the correct input source.

Hum ma ọ bụ mkpọtụ

• Ensure the turntable's ground wire is properly connected to the GND terminal on the Nobsound T3.
• Lelee maka njikọ eriri adịghị.
• Bufee ngwaọrụ ahụ pụọ na ngwaọrụ eletrọniki ndị ọzọ nwere ike ibute nsogbu.
• Try using different RCA cables, as faulty shielding can cause hum.

9. Nkọwapụta

Image: The Nobsound T3 phono preamplifier shown in hand, highlighting its compact dimensions.

10. Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Douk Audio customer service. Keep your purchase receipt for warranty claims.