Einhell Cordless Impact Driver TE-CD 18/48 Li-i User Manual

Ntuziaka nchekwa dị mkpa

Gụọ ịdọ aka ná ntị nchekwa niile, ntuziaka, nkọwa na nkọwapụta enyere na ngwa ike a. Ọdịda ịgbaso ntuziaka niile edepụtara n'okpuru nwere ike bute ujo ọkụ eletrik, ọkụ na/ma ọ bụ mmerụ ahụ dị egwu.

Ịdọ aka ná ntị Nchekwa Ngwá Ọrụ Ike Ozuruọnụ

• Nchekwa mpaghara ọrụ: Debe ebe a na-arụ ọrụ ọcha na ọkụ nke ọma. Ebe mgbagwoju anya ma ọ bụ ọchịchịrị na-akpọ ihe mberede. Ejila ngwaọrụ ike rụọ ọrụ n'ime ikuku mgbawa, dị ka n'ihu mmiri ọkụ, gas, ma ọ bụ uzuzu.
• Nchekwa Eletriki: Plọg ngwaọrụ ike ga-adabarịrị na mpụta. Agbanwela plọg ahụ n'ụzọ ọ bụla. Ewepụla ngwaọrụ ike na mmiri ozuzo ma ọ bụ ọnọdụ mmiri.
• Nchekwa nkeonwe: Stay alert, watch what you are doing, and use common sense when operating a power tool. Use personal protective equipment. Always wear eye protection.
• Iji na Nlekọta Ngwa Ike: Amanyela ngwá ọrụ ike. Jiri ngwa ike ziri ezi maka ngwa gị. Kwụpụ ngwugwu batrị na ngwa ike tupu ime mgbanwe ọ bụla, ịgbanwe ngwa ma ọ bụ ichekwa ngwa ike.

Nchekwa batrị na chaja

• Only use the charger specified by the manufacturer to recharge. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Jiri ngwaọrụ ọkụ naanị na ngwugwu batrị ahapụtara. Iji ngwugwu batrị ọ bụla ọzọ nwere ike ịmepụta ihe egwu nke mmerụ ahụ na ọkụ.
• Mgbe ejighị batrị batrị, debe ya na ihe ọla ndị ọzọ, dị ka obere mpempe akwụkwọ, mkpụrụ ego, igodo, mbọ, skru ma ọ bụ obere ihe igwe ndị ọzọ, nke nwere ike ime njikọ site n'otu ọdụ gaa na nke ọzọ.
• N'okpuru ọnọdụ mkparị, enwere ike ịpụpụ mmiri mmiri na batrị; zere kọntaktị. Ọ bụrụ na kọntaktị emee na mberede, sachaa na mmiri. Ọ bụrụ na mmiri mmiri na-akpakọrịta anya, chọọkwa enyemaka ahụike.

Ngwaahịa gafereview

The Einhell TE-CD 18/48 Li-i is a versatile cordless impact driver designed for drilling, impact drilling, and screwing tasks. It is part of the Power X-Change battery system, ensuring compatibility with other Einhell 18V batteries.

Foto 1: The Einhell TE-CD 18/48 Li-i Cordless Impact Driver shown with its two 2.0Ah Power X-Change batteries, charger, and storage case. This image illustrates the complete kit included with the product.

Ngwa ngwa

• Onyinye: For securing drill bits and screwdriver bits.
• Torque Selector Ring: Adjusts the torque for screwing applications.
• Nhọrọ ọrụ: Switches between drilling, impact drilling, and screwing modes.
• Ngbanwe Nhọrọ Ọsọ: Controls the two-speed gear for different applications.
• Mgbanwe na-akpalite: Activates the tool and controls speed (variable speed).
• Ngbanwe na-atụgharị/atụgharị: Na-agbanwe ntụziaka ntụgharị.
• Ọkụ ọrụ LED: Na-amụba ebe ọrụ.
• Ngwungwu batrị: 18V Power X-Change Li-ion battery.
• Chaja batrị: For recharging the Power X-Change batteries.
• Aka inyeaka: Na-enye njide na njikwa ọzọ.

Melite

1. Ịchaji batrị

1. Jikọọ chaja na ebe ọkụ kwesịrị ekwesị.
2. Fanye ngwugwu batrị n'ime chaja. Gbaa mbọ hụ na ọ pịrị n'ime ebe.
3. Ọkụ ihe ngosi chaja dị na chaja ga-egosi ọnọdụ chaja. Lee ntuziaka kpọmkwem nke chaja maka ihe ngosi ọkụ.
4. Ozugbo chajịchara zuru oke, wepụ batrị na chaja.

2. Ịtinye na iwepu batrị

• Ịtinye: Slide the charged battery pack into the base of the impact driver until it locks securely.
• Na-ewepu: Press the release button(s) on the battery pack and slide it out of the tool.

3. Attaching and Removing Drill Bits/Accessories

1. Gbaa mbọ hụ na agbanyụrụ ngwaọrụ ahụ wee wepụ batrị.
2. Tụgharịa mkpọ ahụ n'akụkụ elekere ka imeghe agba.
3. Insert the drill bit or accessory into the chuck, ensuring it is centered.
4. Gbanwee mkpọ ahụ n'akụkụ elekere iji mee ka agba gbasie ike gburugburu ntakịrị. Ejisie aka ike.
5. To remove, rotate the chuck counter-clockwise and pull out the bit.

4. Na-agbakwunye Aka Aka Enyemaka

The auxiliary handle provides better control, especially during impact drilling or when working with higher torque. Screw the auxiliary handle onto the designated threaded collar at the front of the drill until it is firm. Adjust its position for comfortable use.

Ntuziaka ọrụ

1. Ịgbanye / gbanyụọ na njikwa ọsọ ọsọ

• Iji gbanye: Press the trigger switch. The tool's speed is variable depending on how far the trigger is pressed.
• Iji gbanyụọ: Hapụ mgba ọkụ mkpalite.
• Nhọrọ ọsọ ọsọ: Use the 2-speed gear selector switch located on top of the tool. Position '1' is for low speed and high torque (e.g., screwing, large diameter drilling). Position '2' is for high speed and lower torque (e.g., small diameter drilling).

2. Setting Rotation Direction (Forward/Reverse)

The forward/reverse switch is located above the trigger. Push it to the left for forward rotation (drilling/screwing in) and to the right for reverse rotation (removing screws). Ensure the switch is in the center position when not in use to prevent accidental starting.

3. Selecting Operating Mode and Torque

• Screwing Mode: Rotate the function selector ring to the screw symbol. Adjust the torque selector ring to the desired setting (1-21). Lower numbers are for smaller screws or softer materials; higher numbers for larger screws or harder materials.
• Ụdị ịkụ ala: Rotate the function selector ring to the drill bit symbol. The clutch will not engage, providing maximum torque for drilling.
• Ọnọdụ Mkpọpụta Mmetụta: Rotate the function selector ring to the hammer symbol. This mode is for drilling into masonry or concrete.

4. Using the LED Work Light

The integrated LED work light automatically illuminates the work area when the trigger is pressed, improving visibility in dimly lit conditions.

5. Atụmatụ ọrụ izugbe

• Always hold the tool firmly with both hands, especially when using the auxiliary handle.
• Tinye ngwa ngwa, ọbụna nrụgide. Amanyela ngwá ọrụ ahụ.
• Maka igwu ala, malite na ọsọ dị nwayọ iji mepụta oghere nnwale, wee mụbaa ọsọ dịka ọ dị mkpa.
• When screwing, use the appropriate torque setting to prevent stripping screw heads or damaging the workpiece.

Foto 2: An individual demonstrating the use of the Einhell TE-CD 18/48 Li-i Cordless Impact Driver for drilling into a wooden beam. This illustrates proper handling and application of the tool during operation.

Nlekọta

Regular maintenance ensures the longevity and optimal performance of your Einhell Cordless Impact Driver.

1. Nhicha

• Wepu ngwugwu batrị mgbe niile tupu ihicha ya.
• Keep the ventilation slots clean to prevent overheating. Use a soft brush or compressed air.
• Jiri nwayọ hichaa ụlọ akụrụngwa, damp akwa . Ejila ihe nhicha siri ike ma ọ bụ ihe mgbaze.
• Na-ehicha agbà ndị ahụ mgbe niile iji hụ na ijide ibe n'ibe kwesịrị ekwesị.

2. Nlekọta batrị

• Chekwaa batrị n'ebe dị jụụ, kpọrọ nkụ, pụọ na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
• Do not allow batteries to fully discharge for extended periods. Recharge them periodically if not in use.
• Inspect battery terminals for dirt or corrosion and clean if necessary.

3. Nchekwa

Store the impact driver, batteries, and charger in the provided carry case in a dry, secure location, out of reach of children. Ensure the battery is removed from the tool before storage.

Nchọpụta nsogbu

If you encounter problems not listed here or if solutions do not resolve the issue, please contact Einhell customer support.

Nkọwapụta

Akwụkwọ ikike na nkwado

Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty, details of which can typically be found on the official Einhell websaịtị ma ọ bụ n'ime nkwakọ ngwaahịa.

For warranty claims, technical support, or spare parts, please contact your local Einhell service center or visit the official Einhell website for contact information and further assistance.

Biko dowe akwụkwọ ikike ịzụrụ ihe ọ bụla.