1. Ngwaahịa gafereview
The Klarstein Vinea is a 60cm undermount extractor hood designed for installation beneath kitchen cabinets or shelves. It features an extendable flat screen that doubles the suction area when pulled out. This appliance offers three power levels for effective air extraction, with a maximum suction capacity of 610 m³/h. It includes switchable halogen lighting to illuminate the cooking area and is equipped with two interchangeable, dishwasher-safe aluminum grease filters. The Vinea can be operated in exhaust air mode or converted to recirculation mode with an optionally available activated carbon filter.
- Igwe ikuku dị mma: Three power levels with a maximum air flow capacity of 610 m³/h.
- Nhazi enwere ike: Flat screen extends to increase the capture area.
- Ngwakọta ọkụ: Two switchable halogen lamps for clear visibility.
- Nlekọta dị mfe: Dishwasher-safe aluminum grease filters.
- Ọrụ Na-agbanwe Agbanwe: Convertible between exhaust air and recirculation modes (activated carbon filter sold separately).
Foto: N'ihu view of the Klarstein Vinea extractor hood with its flat screen extended, showing the control panel and lights.
2. Ntuziaka nchekwa
Please read these safety instructions carefully before installation and operation. Keep this manual for future reference.
- Hụ na nrụnye eletriki ahụ kwekọrọ n'iwu obodo.
- Kwụpụ ngwa na ọkụ ọkụ tupu ihicha ma ọ bụ mmezi ọ bụla.
- Ejila flambé n'okpuru mkpuchi nso.
- Gbaa mbọ hụ na ikuku ikuku zuru oke n'ime ụlọ ahụ mgbe a na-eji ihe mkpuchi nso n'otu oge na gas ma ọ bụ ngwa ndị ọzọ na-ere ọkụ.
- Agaghị ahapụ ikuku ikuku na-ekpochapụ n'ime flue nke a na-eji eme ka uzuzu na-agwụ ike sitere na ngwa na-ere gas ma ọ bụ mmanụ ndị ọzọ.
- Na-asachapụ ihe nzacha griiz mgbe niile iji gbochie ihe egwu ọkụ.
- Ezubere ngwa a maka iji ndị mmadụ (gụnyere ụmụaka) nwere ike anụ ahụ, mmetụta uche ma ọ bụ nke uche, ma ọ bụ enweghị ahụmịhe na ihe ọmụma, ma ọ bụrụ na enyereghị ha nlekọta ma ọ bụ ntụziaka gbasara iji ngwa ahụ site n'aka onye na-ahụ maka nchekwa ha.
- Ekwesịrị ilekọta ụmụaka ka ha hụ na ha ejighi ngwa eji egwu egwu egwu.
3. Ntọala na nwụnye
The Klarstein Vinea extractor hood is designed for under-cabinet mounting. Proper installation is crucial for optimal performance and safety.
3.1 Na-arịgo
The hood should be mounted at a safe distance above the cooking surface, typically between 65-75 cm (25.6-29.5 inches) for electric cooktops and 75-85 cm (29.5-33.5 inches) for gas cooktops. Refer to the technical drawing for precise dimensions and mounting points.
Image: Technical drawing showing the dimensions and mounting points of the extractor hood.
3.2 Ventilation Options
- Exhaust Air Mode: Connect the hood to an external ducting system (not supplied) to vent cooking fumes outside. Ensure the ducting is of appropriate diameter (150mm recommended) and as short and straight as possible for best performance.
- Ụdị recirculation: For recirculation, an activated carbon filter (sold separately) must be installed. This filter cleans the air before returning it to the kitchen. No external ducting is required for this mode.
3.3 Njikọ eletrik
Gbaa mbọ hụ na ọkọnọ ike dabara na voltage specified on the appliance rating label (220 Volts). The appliance must be properly grounded.
Image: The Klarstein Vinea extractor hood installed in a modern kitchen above a cooktop, demonstrating its integrated appearance.
4. Ntuziaka ọrụ
The Klarstein Vinea extractor hood is operated via physical touch buttons located on the front panel.
4.1 Ogwe njikwa
Image: Detailed close-up of the touch control panel with illuminated symbols for power, fan speed adjustment, and light control.
4.2 Basic Arụmọrụ
- Gbanyụọ/ Gbanyụọ: Press the power symbol button (U) iji gbanye ma ọ bụ gbanyụọ ihe mkpuchi ahụ.
- Ndozi ọsọ onye ofufe: Use the '+' and '-' buttons to cycle through the three available fan speeds. Select a higher speed for more intense cooking fumes.
- Njikwa ọkụ: Press the light symbol button (*) to turn the halogen lights on or off.
- Extendable Screen: Gently pull the front panel outwards to extend the flat screen and increase the extraction area. Push it back in to retract.
5. Nlekọta na nhicha
Regular maintenance ensures optimal performance and extends the lifespan of your extractor hood.
5.1 Na-ehicha ihe nzacha griiz
The aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain suction efficiency. They are dishwasher safe.
- To remove: Locate the release clips on each filter, press them, and pull the filter downwards.
- Clean: Wash in a dishwasher or by hand using hot water and a mild detergent. Ensure they are completely dry before reinstallation.
- To reinstall: Insert the filter into its slot and push until the clips engage securely.
Foto: nso nso view of the two aluminum grease filters and the halogen lights from below, showing the removable filter design.
5.2 Replacing Activated Carbon Filters (Recirculation Mode)
If operating in recirculation mode, the activated carbon filters (not included) need to be replaced every 3-6 months, depending on usage. Refer to the specific instructions provided with the activated carbon filters for replacement procedures.
5.3 Cleaning Exterior Surfaces
Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaning agent. Do not use harsh chemicals or abrasive pads, as these can damage the finish.
6. Nchọpụta nsogbu
Before contacting customer support, please refer to the following table for common issues and solutions.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Hood anaghị agba ọkụ | No power supply; Power cord disconnected; Fuse blown; Appliance fault. | Check power connection; Check circuit breaker/fuse; Contact qualified technician. |
| Ike mmiri dị ala | Grease filters clogged; Activated carbon filters saturated (recirculation mode); Ducting obstructed or too long/bendy; Flat screen not fully extended. | Clean grease filters; Replace activated carbon filters; Check ducting for obstructions; Fully extend the flat screen. |
| Ọkụ anaghị arụ ọrụ | Bọlbụ ahụ nwere nsogbu; Nsogbu njikọ eletriki. | Replace halogen bulb (ensure power is off); Check electrical connections; Contact qualified technician. |
| Oke mkpọtụ | Loose components; Impeller obstruction; Incorrect installation. | Check for loose screws or parts; Inspect impeller for foreign objects (with power off); Verify correct installation; Contact qualified technician. |
7. Nka na ụzụ nkọwa
| Njirimara | Nkọwapụta |
|---|---|
| Nọmba nlereanya | 10031681 |
| Ụdị | KLARSTIN |
| Ụdị nkwụnye | N'okpuru Cabinet Mount |
| Ike ikuku | Mita Kubik 610 kwa elekere |
| Ọnụọgụ nke Ọsọ ọsọ | 3 |
| Voltage | 220 volts |
| Wattage | 107 watt |
| Ụdị isi iyi ọkụ | Halogen |
| Ụdị nzacha | Aluminum (with optional activated carbon) |
| Ihe onwunwe | Aluminom |
| Ibu Ibu | 4 Kilogram (8.8 pound) |
| Akụkụ ngwaahịa (D x W x H) | 16.14" x 26.38" x 15.35" |
| Klas arụmọrụ | A |
| Atụmatụ pụrụ iche | Noise Reduction, Re-Circulation capability |
8. Akwụkwọ ikike
This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included with your purchase or visit the official Klarstein websaịtị maka nkọwa na usoro akwụkwọ ikike.
9. Nkwado ndị ahịa
For technical assistance, spare parts, or any questions regarding your Klarstein Vinea extractor hood, please contact Klarstein customer support. Contact information can typically be found on the official Klarstein websaịtị ma ọ bụ n'akwụkwọ ịzụrụ ihe.
