Nedis DVB-S2 HD Receiver (Model: DVBS2265BK)

1. Okwu mmalite

This manual provides essential information for the safe and efficient operation of your Nedis DVB-S2 HD Receiver, model DVBS2265BK. This device is designed to receive DVB-S/S2 satellite signals and decode MPEG-2/4 H.264 and H.265 video formats, delivering high-definition television broadcasts. Please read this manual thoroughly before use and retain it for future reference.

2. Ozi nchekwa

To reduce the risk of electric shock, do not open the receiver. Refer all servicing to qualified service personnel. Observe the following safety precautions:

• Gbaa mbọ hụ na ọkọnọ ọkụ voltage matches the rating label on the adapter.
• Ewepụla onye nnata mmiri ozuzo ma ọ bụ mmiri.
• Avoid placing the receiver near heat sources or in direct sunlight.
• Hụ na ikuku zuru oke dị n'akụkụ ngwaọrụ ahụ. Ekpuchila oghere ikuku.
• Disconnect the power adapter from the wall outlet during lightning storms or when unused for long periods.
• Ejila eriri ọkụ ma ọ bụ plọg mebiri emebi.

3. Ihe ngwugwu

Verify that all items listed below are present in the package:

• Nedis DVB-S2 HD Receiver (DVBS2265BK)
• Njikwa anya
• Ihe nkwụnye ọkụ (12V DC)
• AV Cable (RCA)
• Akwụkwọ ntuziaka (akwụkwọ a)

Figure 3.1: Contents of the Nedis DVB-S2 HD Receiver package.

4. Ngwaahịa gafereview

4.1 Ogwe ihu

Figure 4.1: Front panel of the receiver.

• Ngosipụta Digital: Shows channel number or time.
• CH- / CH+: Buttons to change channels.
• IKE: Button to turn the receiver on/off or to standby mode.

4.2 Ogwe azụ

Figure 4.2: Rear panel of the receiver.

• LNB-IN: Connects to the satellite dish LNB.
• USB: Two USB ports for media playback or Wi-Fi adapter.
• HD-OUT: HDMI output for connecting to a TV or monitor.
• Nke: Analog audio/video output (RCA).
• RS-232: Serial port for service or firmware updates.
• Ethernet: RJ45 port for network connection.
• DC 12V-IN: Power input for the 12V DC adapter.

4.3 Ime Remote

The remote control allows you to operate all functions of the receiver. Insert two AAA batteries (not included) into the battery compartment, observing polarity.

Ọrụ ndị dị mkpa gụnyere:

• IKE: Turns the receiver on/off or to standby.
• IHE: Mutes or restores audio.
• 0-9: Bọtịnụ ọnụọgụ maka nhọrọ ọwa ozugbo.
• CH+/CH-: Na-agbanwe ọwa elu ma ọ bụ ala.
• VOL+/VOL-: Na-edozi olu.
• NchNhr: Na-abanye na menu isi.
• Ọ DỊ MMA: Na-akwado nhọrọ.
• ỤZỌ ỌPỤPỤ: Na-apụ na menu ma ọ bụ ihuenyo dị ugbu a.
• Ozi: Displays channel information.
• EPG: Ntuziaka Mmemme elektrọnik.
• Nyocha: Starts recording (requires USB storage).
• Ajụjụ: Accesses favorite channel list.
• AUDIO: Selects audio track.
• Ederede: Teletext function.
• Ndepụta: Displays channel list.

5. Nhazi

Follow these steps to set up your Nedis DVB-S2 HD Receiver:

1. Jikọọ na TV:

   For best picture quality, connect an HDMI cable (not included) from the receiver's HD-apụ port to an HDMI input on your television. Alternatively, use the supplied AV cable to connect the receiver's AV ports to the corresponding AV inputs on your TV.
2. Jikọọ na efere Satịlaịtị:

   Connect the coaxial cable from your satellite dish LNB to the LNB-IN port on the rear of the receiver.

3. Njikọ Ike:

   Jikọọ ihe nkwụnye ike DC 12V nke enyere na ya na DC 12V-IN port on the receiver, then plug the adapter into a wall outlet.

4. Initial Scan:

   Turn on your TV and select the correct HDMI or AV input. Power on the receiver using the front panel button or remote control. The receiver will likely guide you through an initial setup wizard. Follow the on-screen instructions to select your language, country, and perform a channel scan to find available satellite channels.
5. Njikọ Wi-Fi (Nhọrọ):

   If you wish to use Wi-Fi features, connect a compatible USB Wi-Fi adapter (not included) to one of the USB ports. Navigate to the network settings in the receiver's menu to configure your Wi-Fi connection.

6. Ntuziaka ọrụ

Once setup is complete, you can begin using your receiver:

• Gbanyụọ/ Gbanyụọ: Pịa IKE bọtịnụ dị na panel dịpụrụ adịpụ ma ọ bụ n'ihu.
• Nhọrọ ọwa: Jiri ihe AB + / CH- buttons or enter the channel number directly using the numeric keypad.
• Ndozi olu: Jiri ihe VOL + / VOL- bọtịnụ.
• Isi menu: Pịa MENU button to access settings, channel management, media player, and other features. Use the arrow keys to navigate and OK iji gosi.
• Ntuziaka mmemme eletrọnịkị (EPG): Pịa EPG ka view usoro ihe omume.
• Ndabere mgbasa ozi: Insert a USB storage device into a USB port. Navigate to the media player section in the menu to play supported audio (Dolby Digital, DTS, AAC, MP3, PCM) and video files.
• Edekọ: With a USB storage device connected, press REC to start recording the current program.

7. Nlekọta

Proper maintenance ensures the longevity of your receiver:

• Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa mpụta nke ihe nnata ahụ. Ejila ihe nhicha mmiri ma ọ bụ ihe ndị na-eme ka ọ dị nro.
• Igwe ikuku: Debe oghere ikuku n'ebe a na-anaghị enweta uzuzu na ihe mgbochi iji gbochie oke okpomọkụ.
• Nchekwa: If storing the receiver for an extended period, disconnect it from power and store it in a cool, dry place.

8. Nchọpụta nsogbu

9. Nkọwapụta

10. Akwụkwọ ikike na nkwado

Nedis products are manufactured to high quality standards and are covered by a warranty period as specified in the terms and conditions of sale. This warranty does not cover damage caused by improper use, negligence, or unauthorized modifications.

For technical support or warranty claims, please contact your retailer or the Nedis customer service department. Contact information can typically be found on the Nedis webngwugwu saịtị ma ọ bụ ngwaahịa.