1. Okwu mmalite
Thank you for choosing the hykolity 4FT Linkable LED Linear Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
This LED linear light is designed for various indoor applications, including commercial offices, living rooms, restaurants, exhibition halls, garages, workshops, and storage areas. It features dimmable functionality, selectable color temperatures (3000K, 4000K, 5000K), and a linkable design for seamless connections.
2. Ntuziaka nchekwa
Ịdọ aka ná ntị: To prevent electric shock, fire, or injury, always follow basic safety precautions when installing or using this product.
- Turn off the power at the circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
- Emebere ngwaahịa a maka eji naanị ime ụlọ. Do not use in wet or damp ebe.
- Ensure the fixture is properly grounded to avoid potential electrical hazards.
- Do not modify the fixture or use it for purposes other than its intended use.
- Zere ile anya kpọmkwem n'ebe ọkụ LED dị mgbe a na-enye ya ọkụ, n'ihi na ọ nwere ike ibute nsogbu anya.
- Debe ihe nkwakọ ngwaahịa n'ebe ụmụaka nọ.
3. Ihe ngwugwu
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact hykolity customer support.
- LED Architectural Suspended Linear Channel Light Fixture(s)
- Installation Kit (includes flexible cable mounting brackets, screws, wall anchors, and cable hanging system)
Foto 1: Product dimensions and included accessories, including mounting brackets and cables.
4. Ntọala na nwụnye
Ihe dị mkpa: Hụ na agbanyụrụ ọkụ eletrik na ihe mgbawa sekit tupu ịmalite nrụnye.
- Adjust Cable Mounting Bracket: According to your installation requirements, adjust the linear fixture using the flexible cable mounting bracket. Double-check that the cable holds tightly and securely.
- Wepu mkpuchi ihu: Use appropriate tools to carefully remove the front cover of the LED linear light.
- Jikọọ Wiring: Connect the AC (Live), N (Neutral), and GND (Ground) wires. If dimming functionality is desired, connect the dimmable wires (purple/gray, minimum 24 AWG, rated min 105°C, 300V). If dimming is not needed, these wires can be capped off. After connecting, put the back cover in place.
- Route AC and Dimmable Wires: Break through the designated hole in the cover using a cutting nipper. Route the AC wire and dimmable wire into the LED linear fixture. If dimming is unnecessary, no connection to the dimmable wire is required.
Foto 2: Detailed installation steps for the hykolity LED Linear Light.
Nhazi ejikọtara
This fixture features a unique linkable design, allowing you to connect up to 10 lights in series seamlessly. Ensure proper electrical connections between linked units.
Foto 3: Illustration of the linkable design and connection process.
5. Ntuziaka ọrụ
Gbanyụọ/ Gbanyụọ
Once installed and wired correctly, the light can be turned on or off using a standard wall switch connected to the fixture's power supply.
Ọrụ na-ebelata
The hykolity LED Linear Light supports 0-10V dimming, allowing brightness adjustment from 10% to 100%. For optimal performance, use compatible 0-10V dimmers such as Lutron: IP710-40F or Legrand: RH4FBL3P.
Foto 4: Smooth dimming capability of the LED linear light.
Color Temperature Selection (CCT)
This fixture offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). The CCT can be adjusted via a switch located on the fixture, allowing customization to suit different environments and preferences.
6. Nlekọta
Regular maintenance ensures optimal performance and longevity of your LED linear light.
- Nhicha: Ensure the power is turned off before cleaning. Wipe the fixture with a soft, dry, or slightly damp Ákwà. Ejila ihe nhicha, ihe mgbaze, ma ọ bụ kemịkalụ siri ike, n'ihi na ihe ndị a nwere ike imebi ihe ndị dị na ya ma ọ bụ ihe ndị dị na eletriki.
- Nyocha: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, discontinue use and consult a qualified electrician or contact customer support.
- Ndokwa bọlbụ: This fixture uses integrated LED chips and does not require bulb replacement. The expected lifespan is 50,000 hours.
7. Nchọpụta nsogbu
If you encounter issues with your hykolity LED Linear Light, refer to the following troubleshooting guide:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo | Enweghị ọkụ Wiwi na-ezighi ezi Mgbanwe na-ezighi ezi | Lelee ihe mgbawa sekit na mgba ọkụ mgbidi. Verify all wire connections (AC, Neutral, Ground) are secure and correct. Test the switch for functionality. |
| Ọkụ na-enwu ma ọ bụ na-ebelata n'enweghị usoro | dimmer na-ekwekọghị ekwekọ Ngwa ngwa waya Sekit ebufere oke | Ensure a 0-10V compatible dimmer is used (e.g., Lutron IP710-40F, Legrand RH4FBL3P). Check dimmable wire connections. Gakwuru onye ọrụ ọkụ eletrik ka ọ lelee ibu sekit ahụ. |
| Cannot change color temperature (CCT) | CCT switch not set | Locate the CCT selection switch on the fixture and adjust to the desired setting (3000K, 4000K, or 5000K). |
| Multiple linked lights not working | Connection issue between units Exceeded maximum linkable units | Check the physical and electrical connections between all linked fixtures. Ensure no more than 10 units are linked in series. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | hykolite |
| Aha Nlereanya | HBLL-FLC03 |
| Akụkụ ngwaahịa | 44"L x 2.6"W x 2.8"H |
| Ibu Ibu | Paụnd iri na asatọ (kwa otu) |
| Wattage | 40 Watt |
| Icha ọkụ | 4800 Lumen |
| Okpomọkụ agba (CCT) | 3000K / 4000K / 5000K Nhọrọ |
| Enwere ike ibelata | 0-10V Dimmable (10%-100%) |
| Voltage | 100-277 volts |
| Ụdị isi iyi ọkụ | Ikanam |
| Ihe onwunwe | Aluminom, polyester |
| Ụdị mmecha | Agba |
| Ụdị nwụnye | Akwụsịla |
| Ojiji ime ime/n'èzí | Naanị ime ụlọ |
| Nkezi Ndụ | Awa 50,000 |
| Ndekọ ngosi agba (CRI) | 90.0 |
| Asambodo | ETL & CE Certified |
9. Akwụkwọ ikike na nkwado
Ozi akwụkwọ ikike
This hykolity LED Linear Light comes with a Akwụkwọ ikike na-akparaghị ókè 5 afọ against any defects in materials and workmanship from the date of purchase.
Nkwado ndị ahịa
For any questions, technical assistance, warranty claims, or support needs, please contact hykolity customer service. Refer to your purchase platform for contact details or visit the official hykolity websaịtị maka nhọrọ nkwado.
