1. Okwu mmalite
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. Ihe ngwugwu
Nyochaa na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 x Akwụkwọ ntuziaka onye ọrụ
- Ntụnye nkwado na kposara
3. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | HOS-401WBT |
| Ụdị Ọkà Okwu | N'èzí / Ime ụlọ |
| Mpụta ike | Watt 200 (100W kwa ọkà okwu) |
| Dayameta Woofer | 4 sentimita asatọ |
| Dayameta Tweeter | 1 inch |
| Njikọta | Bluetooth, Wired (Passive speaker connection) |
| Oke Bluetooth | Ruo mita 20.12 (ụkwụ 66) |
| Ọkwa Nguzogide mmiri | IP66 (mmiri na-eguzogide) |
| Ihe onwunwe | Acrylonitrile Butadiene Styrene (ABS) |
| Akụkụ ngwaahịa (L x W x H) | 8.62" x 5.67" x 6.62" (219mm x 144mm x 159mm) |
| Ntinye Voltage | 12 volts |
| Ọnọdụ mmepụta ọdịyo | Stereo |
4. Nhazi
4.1 Ịwụnye ndị ọkà okwu
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- Wepu brackets: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- Tinye akara: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- Wụnye brackets: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- Attach Speakers: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.
4.2 Wiring the Speakers
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- Njikọ ike: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.
5. Ọrụ
5.1 Njikọ Bluetooth
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- Mee ka Bluetooth rụọ ọrụ: On your smartphone or tablet, enable Bluetooth.
- Chọọ maka Ngwaọrụ: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- Jikọọ: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.
5.2 Ngwugharị ọdịyo
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- Njikwa olu: Adjust the volume directly from your connected device.
- Ogo ụda: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. Nlekọta
- Nhicha: Use a soft, dry cloth to clean the speaker surfaces. Avoid abrasive cleaners or solvents.
- Nchekwa ihu igwe: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- Nchekwa: Ọ bụrụ na ị na-echekwa okwu ndị ahụ ruo ogologo oge, wepụ ha na ọkụ ma debe ha n'ebe dị jụụ ma kpọọ nkụ.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ike | Ejikọghị ihe nkwụnye ọkụ ma ọ bụ ụzọ adịghị mma. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| Enweghị ụda | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| Njikọ Bluetooth | Device out of range or interference. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| Ụda agbagọ | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. Akwụkwọ ikike na nkwado
All Herdio speaker products come with a Akwụkwọ ikike dị afọ 1 against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
For questions or support, please contact us at: support@herdiotech.com
