Einhell Angle Grinder TC-AG 125/1 User Manual

1. Ntuziaka nchekwa

Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before use.

• Yiri Ngwa Nchekwa Onwe Onye (PPE): Always wear safety glasses, hearing protection, and suitable gloves. A dust mask is recommended for dusty operations.
• Ihe eji arụ ọrụ echedoro: Hụ na ihe eji arụ ọrụ ahụ kwụsiri ike ma dịkwa nchebeamped iji gbochie mmegharị n'oge ọrụ.
• Jikwaa mpaghara ọrụ dị ọcha: Keep the work area well-lit and free of clutter to prevent accidents.
• Kwụpụ ike: Always disconnect the angle grinder from the power supply before making any adjustments, changing accessories, or performing maintenance.
• Use Correct Discs: Only use cutting or grinding discs that are rated for the correct speed and diameter (125 mm) for this tool.
• Zere imebiga ihe ókè: Nọgide na-enwe ụkwụ kwesịrị ekwesị na nguzozi oge niile.
• Malitegharịa Nchekwa: This tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored. The switch must be manually reset.

2. Ngwaahịa gafereview

Ngwa

The Einhell Angle Grinder TC-AG 125/1 is designed for versatility in grinding, smoothing, and rust removal tasks.

Nyocha 2.1: N'eluview of the Einhell Angle Grinder TC-AG 125/1, showing its compact design with red and black housing, silver gear head, and auxiliary handle.

• Isi njikwa: E mere ya ka ọ dị mfe ijide.
• Aka inyeaka: Can be mounted in two positions for optimal control and ergonomics.
• Mkpọchi Spindle: Facilitates quick and easy disc changes.
• Disc Guard: Na-enye nchebe n'oge ọrụ.
• Metal Gear Head: Robust and flat for flexible applications and durability.
• Mgbanwu ma ọ bụ gbanyụọ: With restart protection feature.

Ọgụgụ 2.2: nso nso view of the angle grinder's main body, highlighting the on/off switch and the robust construction of the gear head.

Ọgụgụ 2.3: Zuru ezu view of the angle grinder's disc attachment area, showing the disc guard and the spindle for mounting cutting or grinding discs.

Atụmatụ igodo

• Powerful 800-watt motor for efficient operation.
• Maximum speed of 11,000 revolutions per minute.
• Robust, flat metal gear head for flexible applications.
• High user safety thanks to disc protection and restart protection.
• Auxiliary handle can be mounted in two different positions for ergonomic use.
• Spindle lock for easy and convenient tool change.
• Suitable for cutting discs with a diameter of 125 mm.

Ergonomic imewe maka njikwa dị mma.

Features a flat and robust aluminum gear head.

Designed for easy and convenient disc changes.

Compatible with 125 mm diameter cutting discs.

3. Nhazi

Na-agbakwunye Aka Aka Enyemaka

1. Ensure the angle grinder is unplugged from the power supply.
2. The auxiliary handle can be screwed into either of the two threaded holes on the gear head, depending on your preferred working position and hand dominance.
3. Tighten the handle securely by hand.

Installing/Changing the Cutting Disc

1. Ensure the angle grinder is unplugged from the power supply.
2. Pịa ma jide bọtịnụ mkpọchi spindle ka ọ ghara ịgbanwuo spindle.
3. Using the provided spanner wrench, loosen and remove the clamping nut (if a disc is already installed).
4. Tinye flange n'azụ n'elu spindle.
5. Position the new 125 mm cutting or grinding disc onto the backing flange, ensuring it is centered.
6. Kpuchie clamping nut back onto the spindle.
7. Press the spindle lock button again and tighten the clamping nut firmly with the spanner wrench.
8. Release the spindle lock before operating the tool.

4. Ntuziaka ọrụ

Ịgbanyụ/ Gbanyụọ

• Ka ịgbanwuo: Push the slide switch forward. For continuous operation, push it further forward until it locks into place.
• Ịgbanyụ: For continuous operation, press the rear part of the slide switch to release the lock. For momentary operation, simply release the switch.
• Due to the restart protection, if the power supply is interrupted, the tool will not restart automatically. You must manually reset the switch to the OFF position and then back to ON.

Usoro egweri na igbubi

Always ensure proper ventilation and wear appropriate safety gear when operating the angle grinder.

Figure 4.1: A user demonstrating the application of the Einhell Angle Grinder for metal cutting, emphasizing the importance of safety glasses and gloves.

• Na-egweri: Hold the angle grinder at an angle of approximately 15-30 degrees to the workpiece. Apply moderate pressure and move the tool evenly across the surface.
• Ịcha: For cutting, hold the angle grinder at a 90-degree angle to the workpiece. Apply light, consistent pressure and allow the disc to do the work. Do not force the tool.
• Ntuziaka ọkụ: Position yourself and the tool so that sparks are directed away from your body and any flammable materials.
• Bufee: Avoid overloading the tool. If the motor slows down significantly, reduce pressure.
• Na-ajụ oyi: Allow the tool to cool down during prolonged use by running it at no load for a short period.

5. Nlekọta

Regular maintenance ensures the longevity and safe operation of your angle grinder. Always disconnect the tool from the power supply before any maintenance.

• Nhicha: Regularly clean the ventilation slots to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or solvents.
• Disc Guard: Ensure the disc guard is always securely attached and free from damage.
• Ahịhịa carbon: Check the carbon brushes periodically. If they are worn down, they should be replaced by a qualified technician.
• eriri ike: Inspect the power cord for any signs of damage. Do not use the tool if the cord is damaged.
• Nchekwa: Store the angle grinder in a dry, secure place, out of reach of children.

6. Nchọpụta nsogbu

Nkebi a na-eleba anya na nsogbu ndị ị na-enwekarị na igwe nkuku gị.

7. Nka na ụzụ nkọwa

8. Akwụkwọ ikike na nkwado

Einhell products are manufactured with care and undergo strict quality controls. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions.

For technical support, spare parts, or service inquiries, please contact Einhell customer service or visit the official Einhell website. Keep your proof of purchase handy for any warranty claims.

Einhell UK Websaịtị: www.einhell.co.uk