AUTOOL X60 Multi-Function OBD-II Digital Meter User Manual

1. Okwu mmalite

The AUTOOL X60 OBD computer is a smart and powerful automotive meter designed to provide essential vehicle data. It is particularly useful for vehicles that lack a built-in speedometer, engine temperature gauge, oil thermometer, boost gauge, or fuel consumption meter. The X60 monitors and displays critical information such as battery voltage, chaja injin voltage, and provides warnings for over-speed and engine temperature. It also features real-time data stream reading, trouble code scanning, and clearing capabilities.

2. Atụmatụ igodo

• Ụgbọ ala akwadoro: Compatible with petrol vehicles using standard OBD-II protocol, especially those manufactured after 1996 (US), 2002 (EU petrol), 2004 (EU diesel), and 2009 (Asia).
• Nwụnye dị mfe: Simple plug-and-play setup via the OBD port, requiring no wire modification. Includes a mount and dual-sided tape for secure placement.
• Advanced Hardware: Powered by a 32-bit ARM CORTEX-M3 kernel CPU with a maximum operating frequency of 72MHz, supporting multiple high-speed auto communication protocols.
• Ọrụ ịdọ aka ná ntị: Features water temperature warning, over-speed alarm, shifting reminders, and vehicle malfunction warnings to enhance driving safety.
• Ngosipụta ọtụtụ ọrụ: Displays various parameters including driving speed, engine RPM, battery voltage, coolant temperature, oil temperature, oil pressure, driving distance, fuel consumption, clock, engine load, and intake pressure.
• Diagnostic Capabilities: Reads real-time data streams, scans, and clears trouble codes.

3. Ihe ngwugwu

The AUTOOL X60 package includes the following items:

• 1 x AUTOOL X60 Digital Meter
• 1 x eriri OBD
• 1 x Dual-Sided Tape
• 1 x Akwụkwọ ntuziaka onye ọrụ
• 1 x Asambodo

Video: Unboxing the AUTOOL X60 and reviewing its package contents.

4. Ntọala na nwụnye

Follow these steps to properly install your AUTOOL X60 Digital Meter:

1. Chọta Ọdụ ụgbọ mmiri OBD-II: Identify your vehicle's OBD-II diagnostic port, typically located under the dashboard on the driver's side.
2. Jikọọ eriri OBD: Plug the provided OBD cable into the vehicle's OBD-II port.
3. eriri ụzọ: Carefully route the OBD cable to the desired mounting location for the X60 unit, ensuring it does not interfere with driving controls or safety features. You may tuck the cable into seams for a cleaner look.
4. Connect to X60: Plug the other end of the OBD cable (USB port) into the AUTOOL X60 unit.
5. Mount X60: Use the provided mount and dual-sided tape to securely fix the X60 unit on your dashboard or preferred location. Ensure the display is clearly visible and does not obstruct your view nke okporo ụzọ.

Image: Step-by-step visual guide for connecting the OBD adapter and mounting the AUTOOL X60 unit.

Image: Various angles of the AUTOOL X60 and its mounting base, showing how it attaches to the dashboard.

5. Ntuziaka ọrụ

5.1. Gbanyụọ / gbanyụọ

The AUTOOL X60 automatically powers on when the vehicle is started and powers off when the vehicle is turned off, as it draws power directly from the OBD-II port.

5.2. Ntugharị menu

The unit features a single multi-directional button (often a scroll wheel or rocker switch) on the top or side for navigation. Pressing the button typically confirms a selection, while tilting it left/right or rotating it allows you to scroll through options or change display modes.

5.3. Display Modes and Parameters

The X60 offers multiple display interfaces and a wide range of parameters. You can cycle through different display layouts and select which parameters are shown on the screen.

Foto: Examples of different interface displays available on the AUTOOL X60, showing various data points like speed, RPM, and temperatures.

Image: Icons representing the various displayable functions (e.g., Driving Speed, Engine RPM, Battery Voltage) and alarm functions (e.g., Speed Alarm, Coolant Temp. Alarm).

Common Displayable Parameters:

• Okpomọkụ igwe oyi oyi (ECT)
• Average Fuel Consumption (AVG)
• Revolutions-per-Minute (RPM)
• Turbo Pressure (PSI)
• Voltage (VLT)
• Inlet Pressure (MAP)
• Air-Fuel Ratio (A/F)
• Driving Time (MIN)
• Driving Distance (DIS)
• Engine Load (ELD)
• System Time (TIM)
• Total Mileage (ODO)
• Oil Temperature (OIT)
• Altitude (ASL)
• Ihe mmetụta ọnọdụ trotul (TPS)
• Transmission Temperature (CVT)
• Driving Direction (DIR)

5.4. Ọrụ mkpu

The X60 provides audible and visual alerts for various conditions:

• Water Temperature Warning: Alerts if engine coolant temperature exceeds a set limit.
• Over-Speed Alarm: Notifies the driver if the vehicle speed surpasses a pre-set threshold.
• Shifting Reminding: Provides prompts for optimal gear shifting.
• Vehicle Malfunction Warning: Alerts to detected engine or system malfunctions.
• Oti mkpu ịnya ụgbọ ala ike ọgwụgwụ: Reminds the driver to take a break after extended driving periods.
• Mkpu RPM: Alerts if engine RPM exceeds a set limit.
• Voltagmkpu: Warns if battery voltage falls outside optimal range.

5.5. Ntọala Sistemu

Access the system settings menu to customize various aspects of the X60, including:

• Nhazi asụsụ: Gbanwee asụsụ ngosi.
• Ụda Gbanye: Kwado ma ọ bụ gbanyụọ njiri mara ụda.
• Icha ọkụ: Adjust screen brightness (manual or automatic).
• Nkeji: Switch between Metric (km/h, Celsius) and Imperial (mph, Fahrenheit) units.
• Oti mkpu: Configure specific values for speed, RPM, voltage, and temperature alarms.
• Ndozi oge: Set or adjust the clock.

Image: Illustrates the automatic light sensor feature, which adjusts screen brightness for optimal visibility during both daytime and nighttime driving.

6. Nlekọta

To ensure the longevity and optimal performance of your AUTOOL X60 Digital Meter, follow these maintenance guidelines:

• Nhicha: Use a soft, dry cloth to clean the display screen and the unit's exterior. Avoid abrasive cleaners or solvents that could damage the device.
• Nyocha USB: Periodically check the OBD cable for any signs of wear, fraying, or damage. Replace if necessary to maintain a secure connection.
• Ọnọdụ gburugburu: Zere ikpughe akụkụ ahụ na oke okpomọkụ, ìhè anyanwụ kpọmkwem maka ogologo oge, ma ọ bụ oke mmiri mmiri.
• Mmelite femụwe: Check the official AUTOOL website for any available firmware updates to ensure your device has the latest features and bug fixes.

7. Nchọpụta nsogbu

If you encounter issues with your AUTOOL X60, refer to the following common troubleshooting steps:

• "Failed to Connect" Message:
  • Ensure the OBD cable is securely plugged into both the vehicle's OBD-II port and the X60 unit.
  • Verify your vehicle is compatible with the X60 (12V OBD-II standard, manufactured after specified dates).
  • Turn off the vehicle, unplug the X60, wait a few seconds, and then plug it back in and restart the vehicle.
  • Check for any loose connections or damage to the OBD cable.
• Ọgụgụ na-ezighi ezi:
  • Ensure the correct units (Metric/Imperial) are selected in the system settings.
  • Some parameters may require calibration or adjustment in the system settings (e.g., speed adjustment).
  • If specific sensors are not reading, try unplugging and replugging the unit.
• Ngosipụta anaghị agbanwu:
  • Gbaa mbọ hụ na agbanyere ọkụ ụgbọala ahụ.
  • Check the OBD cable connection.
  • Hụ na batrị ụgbọala ahụ nwere ike ịchaji nke ọma.
• Annoying Beeping Sounds:
  • Access the system settings to adjust or disable specific alarm sounds (e.g., over-speed, RPM alarm).

8. Nkọwapụta

Foto: Zuru ezu view of the AUTOOL X60 showing its dimensions (70mm height, 60mm width) and key components like the LED display, function button, USB port, and OBD adapter.

Image: Diagram illustrating the pinout of a standard OBD-II connector, indicating which pins are used for various signals like SAE J1850 Bus+, Chassis, Signal Ground, CAN High/Low, and Vehicle Battery Positive.

9. Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official AUTOOL websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ maka nkwupụta ikike.