Ngwakọta Guitar Acoustic AE-60 Ama Ama Ampna -emegharị ihe

Okwu mmalite

Thank you for choosing the Fame AE-60 Acoustic Guitar Combo Amponye ndu. Nke a amplifier is designed to provide clear, natural amplification for acoustic guitars and vocals, offering a balanced combination of refined finishes and selected materials. This manual provides essential information for the proper setup, operation, and maintenance of your amplifier iji hụ na arụmọrụ kacha mma na ogologo ndụ.

Melite

Mwepu na nyocha

Jiri nlezianya wepu amplifier from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If any damage is found, contact your dealer immediately. Retain the original packaging for future transport or storage.

Foto 1: N'ihu view of the Fame AE-60 Acoustic Guitar Combo Ampihe ngosi, ihe ngosiasing its brown textured finish and metal grille.

Njikọ Ike

Before connecting the power cable, ensure the amplifier's power switch is in the OFF position. Connect the supplied AC power cable to the amplifier's power input socket on the rear panel and then to a suitable grounded AC outlet. The amplifier supports various voltages (AC100V-240V) as indicated on the rear panel.

Figure 2: Close-up of the rear panel, showing the AC power input socket and external speaker outputs (R/L).

Ngwa na Igwe Okwu Na-ejikọ

The AE-60 features dedicated inputs for both acoustic guitar and a microphone.

• Ntinye igweokwu: Use an XLR cable to connect your microphone to the "INPUT MICROPHONE" jack.
• Ntinye gita: Use a standard 1/4-inch (6.35mm) instrument cable to connect your acoustic guitar to the "INPUT GUITAR" jack.
• Ntinye CD: For connecting external audio sources like CD players or MP3 players, use an RCA cable to the "CD INPUT" jacks (L/R).
• Ọkà okwu mpụga: Nke amplifier includes "EXT. SPEAKER" outputs (R/L) for connecting additional speakers, if desired.
• Ihe mgbakwasị ụkwụ: Connect an optional footswitch to the "FOOTSWITCH" jack to control Chorus and Reverb effects.
• Line Out/Send/Return: These jacks provide options for connecting to external mixers, recording devices, or effects loops.

Figure 3: Detail of the microphone and guitar input sections on the amplifier's control panel.

Figure 4: Detail of the rear panel connections, including Footswitch, Line Out, Return, and Send jacks.

Ntuziaka ọrụ

Ozugbo emechara njikọ niile, gbanye ya amplifier using the "POWER" switch located on the front panel. Slowly increase the "MASTER" volume control to a desired listening level.

Microphone Channel Controls

• ỤDỤ: Adjusts the overall tonal character of the microphone input.
• Ọkwa: Controls the volume of the microphone input.

Guitar Channel Controls

• Ọkwa: Controls the volume of the guitar input.
• IHE: Adjusts the low-frequency response of the guitar sound.
• Ọkara: Adjusts the mid-frequency response of the guitar sound. The frequency can be swept from 200Hz to 1kHz.
• AH: Adjusts the high-frequency response of the guitar sound.
• CHORUS (SPEED/DEPTH/ON/OFF): Adds a rich, swirling effect to the guitar sound. "SPEED" controls the rate of the effect, "DEPTH" controls its intensity. The "ON/OFF" switch activates or deactivates the chorus.
• REVERB (MIC/GUITAR): Adds spaciousness and decay to the sound. Separate controls are provided for the microphone and guitar channels.

Figure 5: Detail of the guitar channel controls, including EQ, Chorus, and Reverb knobs.

Master Section and Equalizer

• Nna-ukwu: Na-achịkwa mkpokọta mmepụta olu nke ampna -emegharị ihe.
• Ntinye CD: Volume control for the external audio source connected to the CD Input jacks.
• Nhazi nhata: A 5-band graphic equalizer (100Hz, 400Hz, 1KHz, 3KHz, 6KHz) allows for fine-tuning the overall tonal output of the amplifier. Adjust the sliders to boost or cut specific frequency ranges.

Figure 6: Detail of the master volume, CD input, power switch, and the 5-band graphic equalizer.

Nlekọta

Nhicha

Iji hichaa amplifier, jiri akwa dị nro, kpọrọ nkụ. Maka unyi isi ike, ntakịrị damp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.

Nchekwa

Mgbe ejighị ya ogologo oge, chekwaa ya amplifier in a cool, dry place, away from direct sunlight and extreme temperatures. If possible, use the original packaging for protection.

Akpachara anya maka nchekwa

• Ekpughela ihe ndị ahụ amplifier ka mmiri ozuzo ma ọ bụ mmiri.
• Akwụsịla oghere ikuku.
• Do not place objects containing liquids on the ampna -emegharị ihe.
• Tụtụ aka n'aka ndị ọrụ ruru eru.

Nchọpụta nsogbu

This section addresses common issues you might encounter with your Fame AE-60 amplifier. If the problem persists after following these steps, please contact qualified service personnel.

Enweghị mpụta ụda

• Gbaa mbọ hụ na amplifier is powered on and the power indicator light is illuminated.
• Check that the "MASTER" volume control is turned up.
• Verify that the "LEVEL" controls for the microphone and guitar channels are turned up.
• Check all cable connections (instrument, microphone, power) for secure fit.
• Test with a different instrument cable or microphone to rule out faulty accessories.

Ụda agbagọ

• Reduce the "LEVEL" controls for the microphone or guitar channel.
• Reduce the "MASTER" volume control.
• Check if any effects (Chorus, Reverb) are set too high.
• Ensure your instrument's output level is not excessively high.

Hum or Noise

• Hụ na e nwere ihe nchekwa nke ọma na eriri niile ma dịkwa mma.
• Gbalịa ịkwụnye amplifier into a different electrical outlet, preferably on a different circuit.
• Debe ihe amplifier away from other electronic devices that might cause interference.

Nkọwapụta

Mara: Nkọwapụta nwere ike ịgbanwe na-enweghị ọkwa maka mmelite ngwaahịa.

Ọgụgụ 7: N'azụ view nke amplifier, showing the dual speakers and various input/output jacks.

Akwụkwọ ikike na nkwado

Warranty information for the Fame AE-60 Acoustic Guitar Combo Amplifier is not provided within this manual. For details regarding warranty coverage, service, and technical support, please refer to the official Fame websaịtị ma ọ bụ kpọtụrụ onye na-ere gị ikike. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.