Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your new Teka MTP 978 single-lever kitchen faucet. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
The Teka MTP 978 is a high-quality kitchen mixer faucet featuring a swivel spout, a pull-out spray with two functions (normal and shower), and an integrated anti-limescale aerator. It is designed for precise temperature control and durable performance.
1. Ntọala na nwụnye
Ihe ngwugwu 1.1
- Teka MTP 978 Faucet body
- Mounting hardware (gaskets, nuts, washers)
- Hot and cold water supply hoses (3/8")
- Akwụkwọ ntuziaka
1.2 Ngwa achọrọ (anaghị etinye ya)
- mgbanaka nwere ike idozi
- Screwdriver
- Plumber's tape
- Basin wrench (optional, for tight spaces)
1.3 Nchekwa nchekwa
- Gbanyụọ isi mmiri tupu ịmalite nrụnye.
- Gbaa mbọ hụ na njikọ niile siri ike iji gbochie ntapu.
- Ọ bụrụ na ịmaghị usoro ọ bụla, kpọtụrụ onye na-ahụ maka pọmpụ ruru eru.
1.4 Nzọụkwụ nwụnye
- Prepare the Sink/Countertop: Ensure the mounting hole is clean and free of debris. The faucet requires a standard single-hole installation.
- Attach Supply Hoses: Screw the hot and cold water supply hoses into the base of the faucet. Hand-tighten, then use a wrench for a quarter turn. Do not overtighten.
- Ugwu Faucet: Place the faucet body through the mounting hole in the sink or countertop. Ensure the rubber gasket is positioned correctly between the faucet base and the sink surface.
- Secure the Faucet: From underneath the sink, slide the metal washer and mounting nut onto the threaded shank. Tighten the nut securely with a basin wrench or adjustable wrench until the faucet is stable.
- Jikọọ Ọdụdọ Mmiri: Connect the hot and cold water supply hoses to the corresponding shut-off valves. Use plumber's tape on the threaded connections and tighten with an adjustable wrench.
- Install Pull-Out Spray Hose: Connect the pull-out spray hose to the designated connection point under the faucet. Ensure the weight (if included) is properly attached to the hose to allow smooth retraction.
- Nwale maka ntapu: Turn on the main water supply slowly and check all connections for leaks. Operate the faucet to ensure proper water flow and temperature control.
2. Ntuziaka ọrụ
2.1 Mmiri mmiri na njikwa okpomọkụ
The Teka MTP 978 features a single lever for controlling both water flow and temperature:
- Njikwa usoro: Lift the lever upwards to increase water flow. Push it downwards to decrease or shut off the flow.
- Njikwa okpomọkụ: Move the lever to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve the desired water temperature.
2.2 Pull-Out Spray Functions
The pull-out spray head offers two distinct water functions:
- Normal Stream: Ideal for filling pots and general washing tasks.
- Shower Spray: Useful for rinsing food, cleaning utensils, or more precise cleaning of the sink.
To switch between functions, press the button located on the spray head. The spray head can be pulled out from the spout for extended reach and flexibility.
2.3 Swivel Spout
The faucet features a low-profile swivel spout that can rotate 110°. This allows for greater flexibility and access to different areas of the sink, making it easier to wash larger items and preventing unnecessary splashing.
3. Nlekọta
3.1 Cleaning the Faucet
- Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals (e.g., ammonia, bleach) as these can damage the chrome finish.
- Jiri mmiri dị ọcha kpochaa nke ọma ma kpochaa ya na akwa dị nro iji gbochie ntụpọ mmiri.
3.2 Cleaning the Anti-Limescale Aerator
The integrated anti-limescale aerator helps prevent mineral buildup. To maintain optimal water flow:
- Unscrew the aerator from the tip of the spout (usually by hand or with a coin).
- Rinse the aerator under running water to remove any loose debris.
- If limescale buildup is present, soak the aerator in a solution of equal parts white vinegar and water for 15-30 minutes.
- Use a soft brush (like an old toothbrush) to gently scrub away any remaining deposits.
- Rinse the aerator thoroughly and reattach it to the spout.
3.3 Ceramic Disc Cartridge
The high-resistance ceramic disc cartridge is designed for long-lasting, leak-free operation. If you experience persistent drips or difficulty controlling water flow/temperature, the cartridge may need to be replaced. This typically requires professional assistance.
4. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Obere mmiri eruba | Clogged aerator; partially closed shut-off valve; kinked supply hose. | Clean the aerator (see Section 3.2); ensure shut-off valves are fully open; check supply hoses for kinks. |
| Leaking at faucet base | Loose mounting nut; damaged gasket. | Tighten mounting nut; inspect and replace gasket if damaged. |
| Leaking from spout | Katrij diski seramiiki eyila. | Replace the ceramic disc cartridge (professional assistance recommended). |
| Difficulty changing spray function | Mineral buildup in spray head mechanism. | Remove spray head and clean thoroughly, soaking in vinegar if necessary. |
| Pull-out spray does not retract fully | Weight on hose is dislodged or obstructed; hose is kinked. | Check and reposition the hose weight; ensure hose path is clear under the sink. |
5. Nkọwapụta
- Ụdị: Teka MTP 978 (Reference: 46.978.12.00)
- Akara: Teka
- Ihe: Igwe igwe
- Mechaa: Chrome chara acha
- Ụdị: Nke dị ugbu a
- Ụzọ ntinye: Single-hole / Deck Mount
- Ọnụọgụ aka: 1 (Single-lever)
- Ụdị Spout: Dị ala-profile swivel spout with 110° rotation
- Ọrụ ịgbasa: Normal stream, Shower spray (pull-out)
- Igwe ọkụ: Anti-limescale
- Katrij: High-resistance ceramic disc (40 mm)
- Supply Hoses: 3/8" flexible hoses
- Akụkụ ngwaahịa (L x W x H): 24 x 16.1 x 4.8 cm (approximate, refer to diagram for detailed measurements)
- Arọ: 1 kilogram
- Eji akwadoro: Ụlọ nri
- Mba onye si: Spain
6. Akwụkwọ ikike Ozi
Teka products are manufactured to high-quality standards and are covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Teka websaịtị maka usoro na ọnọdụ akwụkwọ ikike akọwapụtara nke metụtara mpaghara gị. Debe ihe akaebe nke ịzụrụ ihe gị maka nkwupụta akwụkwọ ikike.
7. Nkwado ndị ahịa
For technical assistance, spare parts, or any questions regarding your Teka MTP 978 faucet, please contact Teka customer service. Contact information can typically be found on the official Teka websaịtị (www.teka.com) or in the documentation provided with your product.
When contacting support, please have your product model (MTP 978) and serial number (if applicable) ready.
